Xerox 7800/DX

ஜெராக்ஸ் 7800/DX கட்ட வண்ண லேசர் பிரிண்டர் பயனர் கையேடு

Model: 7800/DX | Brand: Xerox

தயாரிப்பு முடிந்துவிட்டதுview

The Xerox 7800/DX Phase Color Laser Printer is designed for professional environments requiring high-quality color printing and robust performance. This printer offers advanced capabilities for graphic-intensive tasks, including industry-leading media flexibility and professional color management technologies.

Xerox 7800/DX Phase Color Laser Printer with multiple paper trays

படம் 1: முன் view of the Xerox 7800/DX Phase Color Laser Printer, showcasing its multi-tray design and control panel.

அமைவு வழிமுறைகள்

1. பிரித்தல் மற்றும் இடம் அமைத்தல்

  • Carefully remove the printer from its packaging. Due to its weight (approximately 256 pounds), it is recommended to use appropriate lifting equipment or assistance.
  • Place the printer on a stable, level surface capable of supporting its weight and dimensions (27.52 x 25.24 x 37.52 inches). Ensure adequate ventilation around the unit.

2. மின் இணைப்பு

  • பவர் கார்டை பிரிண்டருடன் இணைக்கவும், பின்னர் தரையிறக்கப்பட்ட மின் நிலையத்துடன் இணைக்கவும்.
  • அச்சுப்பொறியை இயக்க ஆற்றல் பொத்தானை அழுத்தவும்.

3. டோனர் கார்ட்ரிட்ஜ் நிறுவல்

The Xerox 7800/DX uses separate toner cartridges for Black, Cyan, Magenta, and Yellow. Refer to the printer's internal diagrams for specific slot locations.

  1. அச்சுப்பொறியின் முன் அணுகல் பலகத்தைத் திறக்கவும்.
  2. Unpack each toner cartridge (compatible cartridges include 05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806).
  3. Gently shake the cartridge to distribute the toner evenly.
  4. ஒவ்வொரு கார்ட்ரிட்ஜையும் அதன் தொடர்புடைய வண்ண-குறியிடப்பட்ட ஸ்லாட்டில் அது சரியான இடத்தில் கிளிக் செய்யும் வரை செருகவும்.
  5. முன் அணுகல் பலகத்தை மூடு.
Close-up of a printer's internal components, possibly showing toner cartridge slots

படம் 2: எ.காample of an internal printer view, indicating where toner cartridges are typically installed.

4. ஏற்றுதல் காகிதம்

The printer features multiple paper trays with a maximum input sheet capacity of 3140 sheets.

  1. Pull out the desired paper tray. The printer has 2 trays as standard.
  2. Adjust the paper guides to fit the paper size. The printer supports various sizes, including 8.5 x 11 inch and up to 11 inches in width.
  3. Load the paper (plain paper is supported) into the tray, ensuring it is flat and below the maximum fill line.
  4. மெதுவாக தட்டைப் பிரிண்டருக்குள் தள்ளுங்கள்.
  5. Confirm the paper type and size on the control panel if prompted.

5 மென்பொருள் மற்றும் இயக்கி நிறுவல்

To enable printing from your computer, install the necessary drivers.

  • The Xerox 7800/DX is compatible with PC, Mac, and Unix operating systems.
  • அதிகாரப்பூர்வ ஜெராக்ஸ் ஆதரவைப் பார்வையிடவும் webஉங்கள் இயக்க முறைமைக்கான சமீபத்திய இயக்கிகளைப் பதிவிறக்குவதற்கான தளம்.
  • நிறுவலை முடிக்க திரையில் உள்ள வழிமுறைகளைப் பின்பற்றவும்.
  • Connect the printer to your computer via USB or Ethernet cable.

இயக்க வழிமுறைகள்

1. கண்ட்ரோல் பேனல் ஓவர்view

The printer features a touchscreen control panel for easy navigation and settings adjustment. Use the touch interface to access menus, check printer status, and configure print jobs.

Close-up of a printer's touchscreen control panel

படம் 3: விரிவானது view of the printer's touchscreen control panel, showing various menu options.

2. அடிப்படை அச்சிடுதல்

  1. உங்கள் கணினியில் அச்சிட விரும்பும் ஆவணத்தைத் திறக்கவும்.
  2. பயன்பாட்டின் மெனுவிலிருந்து "அச்சிடு" என்பதைத் தேர்ந்தெடுக்கவும்.
  3. Choose the Xerox 7800/DX printer from the list of available printers.
  4. Adjust print settings as needed, such as:
    • Color/Monochrome: The printer supports full color output with a maximum resolution of 1200 x 2400 dpi.
    • இரட்டை அச்சிடுதல்: தானியங்கி இரட்டை பக்க அச்சிடுதல் ஆதரிக்கப்படுகிறது.
    • காகித மூலம்: Select the desired paper tray.
    • பிரதிகள்: ஒரு ஓட்டத்திற்கு 312 பிரதிகள் வரை.
  5. Click "Print." The printer has a maximum print speed of 45 pages per minute (ppm) for both color and monochrome. Initial page print time is 1-2 seconds.

3. இணைப்பு

  • ஈதர்நெட்: Connect the printer to your network using an Ethernet cable for shared access.
  • USB: A single USB 2.0 port is available for direct connection to a computer.

பராமரிப்பு

1. டோனர் மாற்றுதல்

When a toner cartridge is low or empty, the printer's control panel will display a notification. Replace cartridges as follows:

  1. Open the front access panel.
  2. காலியான டோனர் கார்ட்ரிட்ஜை நேராக வெளியே இழுப்பதன் மூலம் கவனமாக அகற்றவும்.
  3. Unpack a new, genuine Xerox toner cartridge of the correct color.
  4. Shake the new cartridge gently.
  5. Insert the new cartridge into the corresponding slot until it locks into place.
  6. முன் அணுகல் பலகத்தை மூடு.

2. சுத்தம் செய்தல்

  • வெளிப்புறம்: வெளிப்புற மேற்பரப்புகளை ஒரு மென்மையான, டி மூலம் துடைக்கவும்amp, பஞ்சு இல்லாத துணி. சிராய்ப்பு கிளீனர்களைத் தவிர்க்கவும்.
  • உட்புறம்: Periodically clean the interior of the printer, especially around the paper path and toner area, using a dry, lint-free cloth or a specialized printer vacuum. Refer to the printer's on-screen instructions for specific cleaning procedures.

சரிசெய்தல்

This section addresses common issues you might encounter. For more detailed troubleshooting, consult the full service manual or contact Xerox support.

பொதுவான சிக்கல்கள் மற்றும் தீர்வுகள்:

  • அச்சுப்பொறி பதிலளிக்கவில்லை:
    • மின் இணைப்புகளைச் சரிபார்த்து, அச்சுப்பொறி இயக்கப்பட்டுள்ளதா என்பதை உறுதிப்படுத்தவும்.
    • நெட்வொர்க் அல்லது USB கேபிள் இணைப்புகளைச் சரிபார்க்கவும்.
    • அச்சுப்பொறி மற்றும் உங்கள் கணினி இரண்டையும் மறுதொடக்கம் செய்யுங்கள்.
    • சரியான அச்சுப்பொறி இயக்கி நிறுவப்பட்டு தேர்ந்தெடுக்கப்பட்டுள்ளதா என்பதை உறுதிப்படுத்தவும்.
  • மோசமான அச்சு தரம்:
    • டோனர் அளவைச் சரிபார்த்து, குறைந்த கார்ட்ரிட்ஜ்களை மாற்றவும்.
    • Perform a print head cleaning or calibration from the control panel.
    • உங்கள் அச்சு அமைப்புகளுக்கு பொருத்தமான காகிதத்தைப் பயன்படுத்துவதை உறுதிசெய்யவும்.
  • காகித நெரிசல்கள்:
    • Follow the on-screen instructions on the control panel to locate and clear the jam.
    • காகிதம் சரியாக ஏற்றப்பட்டுள்ளதா என்பதையும், தட்டுகளில் அதிகமாக நிரப்பப்படாமல் இருப்பதையும் உறுதிப்படுத்திக் கொள்ளுங்கள்.
    • காகிதப் பாதையிலிருந்து ஏதேனும் வெளிநாட்டுப் பொருட்களை அகற்றவும்.

தொழில்நுட்ப விவரக்குறிப்புகள்

அம்சம்விவரக்குறிப்பு
மாதிரி பெயர்Xerox 7800/DX
அச்சிடும் தொழில்நுட்பம்லேசர்
அச்சுப்பொறி வெளியீடுநிறம்
அதிகபட்ச அச்சு வேகம் (நிறம்/ஒற்றை வண்ணம்)45 பிபிஎம்
Max Print Resolution (Color/Monochrome)1200 x 2400 டிபிஐ
இரட்டை அச்சிடுதல்தானியங்கி
அதிகபட்ச உள்ளீட்டு தாள் திறன்3140 தாள்கள்
தட்டுகளின் எண்ணிக்கை2
அதிகபட்ச மீடியா அளவு8.5 x 11 inch (up to 11 inches width)
இணக்கமான சாதனங்கள்பிசி, மேக், யூனிக்ஸ்
இணைப்பு தொழில்நுட்பம்ஈதர்நெட், யூ.எஸ்.பி
வன்பொருள் இடைமுகம்USB
கட்டுப்பாட்டு முறைதொடுதிரை
நினைவக சேமிப்பு திறன்2048 எம்பி
தயாரிப்பு பரிமாணங்கள் (L x W x H)27.52 x 25.24 x 37.52 அங்குலம்
பொருளின் எடை256 பவுண்டுகள்
உள்ளிட்ட கூறுகள்லேசர் பிரிண்டர்
Compatible Cartridge Numbers05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806

உத்தரவாத தகவல்

The Xerox 7800/DX Phase Color Laser Printer comes with a full manufacturer's warranty. For specific terms and conditions, please refer to the documentation included with your product or visit the official Xerox webதளம்.

முக்கிய குறிப்பு: All returns must be authorized by Xerox Corp. No exceptions.

வாடிக்கையாளர் ஆதரவு

For further assistance, technical support, or to access additional resources, please contact Xerox Customer Support or visit their official webதளம்.

நீங்கள் கூடுதல் தகவல்களையும் ஆதரவு வளங்களையும் இங்கே காணலாம் Xerox Store on Amazon or the main Xerox corporate webதளம்.

© 2023 ஜெராக்ஸ் கார்ப்பரேஷன். அனைத்து உரிமைகளும் பாதுகாக்கப்பட்டவை.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.