அறிமுகம்
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
பாதுகாப்பு தகவல்
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
தொகுப்பு உள்ளடக்கங்கள்
நிறுவலைத் தொடங்குவதற்கு முன் அனைத்து கூறுகளும் உள்ளனவா என்பதைச் சரிபார்க்கவும்:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- தாழ்ப்பாளை பொறிமுறை
- Strike plate (ASA Strike)
- பெருகிவரும் திருகுகள்
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
அமைவு மற்றும் நிறுவல்
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. கதவு தயாரிப்பு
Ensure your door is prepared with the following standard dimensions:
- குறுக்கு துளை: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- பின்செட்: 2-3/4 அங்குலம் (70 மிமீ)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Secure the latch with the provided screws.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- கொடுக்கப்பட்டுள்ள திருகுகள் மூலம் ஸ்டிரைக் பிளேட்டைப் பாதுகாப்பாக வைக்கவும்.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
இயக்க வழிமுறைகள்
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
குறிப்பு: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
பராமரிப்பு
Regular maintenance ensures the longevity and smooth operation of your lock.
- சுத்தம்: வெளிப்புற மேற்பரப்புகளை மென்மையான, d துணியால் சுத்தம் செய்யவும்.amp cloth. Avoid abrasive cleaners or solvents, which can damage the finish.
- உயவு: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- ஆய்வு: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
சரிசெய்தல்
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Lever is stiff or hard to turn. | அழுக்கு குவிதல் அல்லது உயவு இல்லாமை. | Clean the mechanism and apply graphite lubricant. |
| Latch bolt does not retract fully. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Door rattles when closed. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| மாதிரி எண் | 129002 |
| தொடர் | 2500 தொடர் |
| பூட்டு வகை | Cylindrical Passage Lock (Non-locking) |
| பொருள் | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| முடிக்கவும் | சாடின் குரோம் |
| நெம்புகோல் உடை | Withnell |
| பேக்ஸெட் | 2-3/4 அங்குலம் (70 மிமீ) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| கை நோக்குநிலை | கைகளற்ற |
| தரம் | Grade 2 (Standard Duty Commercial) |
| ஸ்ட்ரைக் தட்டு | ASA வேலைநிறுத்தம் |
| உள்ளிட்ட கூறுகள் | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
உத்தரவாத தகவல்
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
வாடிக்கையாளர் ஆதரவு
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Webதளம்: Visit the official Hager webஆதரவு வளங்கள் மற்றும் தொடர்புத் தகவலுக்கான தளம்.
- தொடர்பு: Refer to the packaging or Hager's website for phone numbers or email addresses.
When contacting support, please have your model number (129002) and purchase details available.