Anmytek W0018 Rustic Wood Farmhouse Wall Sconce Instruction Manual

அறிமுகம்

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Anmytek W0018 Rustic Wood Farmhouse Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Anmytek W0018 is a single-light wall sconce designed for indoor use, featuring a rustic wood accent, a metal base, and a clear bubble glass shade. It is suitable for various indoor settings such as bathrooms, bedrooms, living rooms, kitchens, and hallways.

பாதுகாப்பு தகவல்

• எச்சரிக்கை: Always turn off the electrical supply at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Failure to do so may result in electrical shock, injury, or death.
• நிறுவல் செயல்முறை பற்றி உங்களுக்குத் தெரியாவிட்டால் அல்லது ஏதேனும் மின் கேள்விகள் இருந்தால் தகுதிவாய்ந்த எலக்ட்ரீஷியனை அணுகவும்.
• அனைத்து மின் இணைப்புகளும் பாதுகாப்பாக இருப்பதையும், உள்ளூர் மின் குறியீடுகளுக்கு இணங்குவதையும் உறுதிசெய்யவும்.
• அதிகபட்ச வாட் அதிகமாக வேண்டாம்tage specified for the light bulb (60 Watts).
• This fixture is designed for indoor use only. Do not expose to moisture or use in wet locations.
• கண்ணாடி பாகங்கள் உடைவதைத் தடுக்க கவனமாகக் கையாளவும்.

தொகுப்பு உள்ளடக்கங்கள்

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

• Wall Sconce Fixture Body (with wood accent and metal base)
• Bubble Glass Shade
• Mounting Hardware (mounting plate, screws, wire nuts)
• அறிவுறுத்தல் கையேடு

Note: Light bulb is not included. An E26 base bulb (max 60W) is required.

விவரக்குறிப்புகள்

தயாரிப்பு பரிமாணங்கள்

Figure 1: Product Dimensions. The fixture measures approximately 8 inches in height, 4.75 inches in width, and extends 5 inches from the wall. The glass shade is 5.5 inches high and 3.5 inches in diameter.

அமைவு மற்றும் நிறுவல்

Before you begin, ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.

1. பவரை அணைக்கவும்: Locate the circuit breaker that supplies power to the light fixture location and turn it OFF. Verify power is off using a voltagஇ சோதனையாளர்.
2. மவுண்டிங் பிளேட்டை தயார் செய்யவும்: Attach the mounting plate to the junction box in the wall using the provided screws. Ensure it is securely fastened.
3. கம்பி இணைப்புகள்: Carefully connect the electrical wires.
   • இணைக்கவும் green or bare copper ground wire from the fixture to the தரை கம்பி from the junction box (usually bare copper or green) using a wire nut.
   • இணைக்கவும் வெள்ளை (நடுநிலை) கம்பி from the fixture to the வெள்ளை (நடுநிலை) கம்பி from the junction box using a wire nut.
   • இணைக்கவும் black (live) wire from the fixture to the black (live) wire from the junction box using a wire nut.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added security.
4. பொருத்துதலை ஏற்றவும்: Carefully tuck the wires into the junction box. Align the fixture body with the mounting plate and secure it with the provided screws. The fixture can be mounted with the glass shade facing up or down, depending on your preference and location.
5. விளக்கை நிறுவவும்: Screw an E26 base light bulb (maximum 60 Watts) into the socket. Do not overtighten.
6. கண்ணாடி நிழலை இணைக்கவும்: Carefully place the bubble glass shade over the bulb and secure it according to the fixture design (typically by screwing a retaining ring onto the socket).
7. சக்தியை மீட்டமை: Turn the electrical supply back ON at the circuit breaker. Test the light fixture.

Figure 2: E26 Bulb Socket Detail. This image shows the E26 bulb socket and the mechanism for securing the glass shade.

Figure 3: Assembled Fixture Detail. This image provides a detailed view of the assembled wall sconce, showcasing its design elements.

இயக்க வழிமுறைகள்

The Anmytek W0018 wall sconce operates via a standard wall switch (push button type, as per specifications) connected to your home's electrical system. Once installed and powered, simply use the wall switch to turn the light on or off.

• Ensure the correct E26 bulb (max 60W) is installed.
• The fixture is designed for general illumination in indoor spaces.

Figure 4: Illuminated Fixture. This image shows the wall sconce in operation, providing light.

பராமரிப்பு

• சுத்தம்: To clean the fixture, ensure the power is off and the fixture is cool. Wipe the metal and wood surfaces with a soft, dry cloth. For the glass shade, a slightly damp cloth can be used, followed by a dry cloth to prevent water spots. Do not use abrasive cleaners or solvents, as they may damage the finish.
• பல்ப் மாற்று: Before replacing a bulb, turn off the power at the circuit breaker and allow the bulb to cool completely. Unscrew the old E26 bulb and screw in a new E26 bulb (maximum 60 Watts). Ensure the new bulb is securely seated before restoring power.
• ஆய்வு: Periodically inspect the fixture for any signs of wear, loose connections, or damage. If any issues are found, turn off power and consult a qualified electrician or contact customer support.

சரிசெய்தல்

உத்தரவாதம் மற்றும் ஆதரவு

The Anmytek W0018 wall sconce comes with a manufacturer-and-seller-combination warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation provided at the time of purchase or contact Anmytek customer support directly.

If you encounter any issues not covered in this manual or require further assistance, please contact Anmytek customer support. You can often find contact information on the product packaging or by visiting the official Anmytek store page online.

மேலும் தகவலுக்கு, பார்வையிடவும் Anmytek Store.