Douk Audio Nobsound 12AX7 12AU7 Vacuum Tube Preamp HiFi முன்ampலைஃபையர் அறிவுறுத்தல் கையேடு

அறிமுகம்

This manual provides essential information for the proper setup, operation, and maintenance of your Douk Audio Nobsound 12AX7 12AU7 Vacuum Tube Preamp HiFi முன்amplifier (Model DJ417F). Please read these instructions carefully before using the device to ensure optimal performance and longevity.

தயாரிப்பு அம்சங்கள்

• Improved circuit design for enhanced audio performance.
• Equipped with Shuguang 12AX7 (ECC83) * 2, 12AU7 (ECC82) * 2, and 6Z4 * 2 vacuum tubes. Note: Tube models may vary based on supply chain, but performance remains consistent.
• Features a robust scaffolding design with a reasonable, regular, and symmetrical device layout, ensuring strict adherence to grounding principles.
• Incorporates Power Transformers 76 * 40 H250 0.35 sheets and a Japan ALPS 16 A-type audio potentiometer for precise control.
• Constructed with a full aluminum chassis and elegant wood side panels.
• Offers 4 sets of stereo L/R RCA audio inputs and 1 set of RCA output for versatile connectivity.

தொகுப்பு உள்ளடக்கங்கள்

பிரித்தெடுத்தவுடன், கீழே பட்டியலிடப்பட்டுள்ள அனைத்து பொருட்களும் உள்ளனவா மற்றும் நல்ல நிலையில் உள்ளனவா என்பதை சரிபார்க்கவும்:

• 1x Nobsound Vacuum Tube Preamp
• 6x Vacuum Tubes (2x 12AX7, 2x 12AU7, 2x 6Z4)
• 1x பவர் கார்டு

Image: The packing list for the Nobsound Tube Preamp, illustrating the main unit, six vacuum tubes, and the power cord included in the package.

அமைவு வழிமுறைகள்

1. குழாய் நிறுவல்

The vacuum tubes are typically packaged separately to prevent damage during transit. Carefully insert each tube into its corresponding socket on the top panel of the preamplifier. Ensure the pins align correctly with the socket holes and gently push down until the tube is seated firmly. Avoid forcing the tubes, as this can bend or break the pins.

படம்: ஒரு நெருக்கமான படம் view of the six vacuum tubes (12AX7, 12AU7, 6Z4) that need to be installed into the preampஆயுள்.

2. ஆடியோ இணைப்புகள்

Connect your audio sources (e.g., CD player, DAC, turntable with phono preamp) to the RCA input jacks on the rear panel. The preamplifier features four stereo RCA inputs. Connect your power amplifier or active speakers to the single stereo RCA output jacks.

Image: The rear panel of the Nobsound tube preamplifier, highlighting the multiple RCA input pairs, a single RCA output pair, and the AC power inlet.

3. மின் இணைப்பு

Connect the provided power cord to the AC inlet on the rear panel of the preamplifier, then plug the other end into a suitable wall outlet. Ensure the voltage matches the device's requirements (100V-115V AC).

இயக்க வழிமுறைகள்

1. பவர் ஆன்/ஆஃப்

Locate the toggle switch on the front panel. Flip the switch to the 'ON' position to power on the preamplifier. The tubes will begin to glow. Allow a few moments for the tubes to warm up before expecting full audio performance. Flip the switch to 'OFF' to power down the unit.

2. உள்ளீடு தேர்வு

Use the rotary input selector knob on the front panel to choose your desired audio source. Rotate the knob to cycle through the available inputs (Input 1, Input 2, Input 3, Input 4). Please note that the physical labeling on the rear panel for inputs may not correspond sequentially with the front selector knob; refer to the physical connections you have made.

3. தொகுதி கட்டுப்பாடு

Adjust the main volume using the large rotary knob on the front panel. Start with a low volume setting and gradually increase it to a comfortable listening level.

Image: The front panel of the Nobsound tube preamplifier, displaying the power toggle switch, input selection knob, and master volume control knob.

பராமரிப்பு

குழாய் மாற்று

Vacuum tubes have a finite lifespan and may require replacement over time. If you notice a degradation in sound quality, increased noise, or if a tube fails to light up, it may be time to replace it. Always ensure the unit is powered off and unplugged before attempting to remove or install tubes. Allow tubes to cool completely before handling. When replacing, use tubes of the same type (12AX7, 12AU7, 6Z4) or compatible equivalents. Handle new tubes with clean gloves to avoid leaving skin oils on the glass, which can shorten their lifespan.

சுத்தம் செய்தல்

To clean the exterior of the preamplifier, use a soft, dry cloth. Avoid using liquid cleaners, aerosols, or solvents, as these can damage the finish or internal components. Ensure the unit is powered off and unplugged before cleaning.

சரிசெய்தல்

• ஒலி இல்லை: Check all audio cable connections. Ensure the correct input source is selected. Verify that the power amplifier or active speakers are turned on and functioning. Confirm that the volume knob is not set to minimum.
• ஹம்மிங் அல்லது சலசலப்பு சத்தம்: This can often be caused by ground loops. Ensure all components are plugged into the same power strip or wall outlet. Try using a different power cord. Check for proper grounding of the unit; some users have found improvements by ensuring the AC outlet ground is connected to the chassis.
• சிதைந்த ஒலி: Ensure all connections are secure. Check if the input signal level is too high, causing clipping. If tubes are old or faulty, they can cause distortion; consider replacing them.
• யூனிட் இயங்கவில்லை: Verify the power cord is securely connected to both the unit and the wall outlet. Check the power switch position. If the unit has a fuse, inspect it for damage and replace if necessary (consult a qualified technician if unsure).

விவரக்குறிப்புகள்

அதிகாரப்பூர்வ தயாரிப்பு வீடியோ

உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Douk Audio customer service directly through their official webதயாரிப்பு வாங்கிய தளம் அல்லது சில்லறை விற்பனையாளரிடம் உத்தரவாதக் கோரிக்கைகளுக்கு உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.