அறிமுகம்
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your MICHELIN MPX22EHDS Pressure Washer. Please read these instructions carefully before using the appliance and retain them for future reference.
பாதுகாப்பு தகவல்
எச்சரிக்கை: இந்த வழிமுறைகளைப் பின்பற்றத் தவறினால் கடுமையான காயம் அல்லது சொத்து சேதம் ஏற்படலாம்.
- Always wear appropriate personal protective equipment, including eye protection, during operation.
- Never direct the water jet at people, pets, or electrical equipment.
- குழந்தைகள் மற்றும் அங்கீகரிக்கப்படாத நபர்களை இயக்கப் பகுதியிலிருந்து விலக்கி வைக்கவும்.
- Ensure the electrical supply is properly grounded and matches the specifications on the product label.
- Do not operate the pressure washer if the power cord or high-pressure hose is damaged.
- Use only clean water as the water source.
- எந்தவொரு பராமரிப்பு அல்லது சுத்தம் செய்வதற்கு முன்பும் எப்போதும் மின்சார இணைப்பைத் துண்டிக்கவும்.
தொகுப்பு உள்ளடக்கங்கள்
கீழே பட்டியலிடப்பட்டுள்ள அனைத்து பொருட்களும் உங்கள் தொகுப்பில் உள்ளதா என்பதைச் சரிபார்க்கவும்:
- MICHELIN MPX22EHDS Pressure Washer Unit
- High-Pressure Gun with Safety Lock
- லான்ஸ் நீட்டிப்பு
- உயர் அழுத்த குழாய் (6 மீட்டர்)
- சரிசெய்யக்கூடிய ஜெட் முனை
- ரோட்டரி முனை
- Foam Cannon Kit (0.4 L)

Image: All included accessories for the MICHELIN MPX22EHDS pressure washer.
அமைவு
1. சட்டசபை
- பேக்கிங்: பேக்கேஜிங்கிலிருந்து அனைத்து கூறுகளையும் கவனமாக அகற்றவும்.
- கையாளுதல் சட்டசபை: Attach the upper handle to the main unit. Ensure it clicks securely into place.
- Hose Reel Assembly: If not pre-assembled, attach the hose reel to the designated mounting points.
- சக்கர இணைப்பு: Securely attach the wheels to the base of the unit.
2. நீர் இணைப்பு
Connect your garden hose to the water inlet on the pressure washer. Ensure the connection is tight to prevent leaks. The water supply must provide a minimum flow rate to ensure optimal performance.

Image: Diagram illustrating water connection from an external tank to the pressure washer.
3. High-Pressure Hose and Gun Connection
- Connect one end of the high-pressure hose to the high-pressure outlet on the unit.
- Connect the other end of the high-pressure hose to the high-pressure gun.
- Attach the lance extension to the high-pressure gun.
- Select your desired nozzle (adjustable jet or rotary nozzle) and attach it to the end of the lance.

Image: High-pressure gun with safety lock.
4. மின் இணைப்பு
Plug the power cord into a suitable, grounded electrical outlet. Ensure the voltage தயாரிப்பின் தேவைகளைப் பூர்த்தி செய்கிறது.
இயக்க வழிமுறைகள்
1. Starting the Pressure Washer
- Ensure all connections (water and power) are secure.
- தண்ணீர் குழாயை முழுமையாக திறக்கவும்.
- Before turning on the unit, squeeze the trigger on the high-pressure gun to purge any air from the system. Hold the trigger until a steady stream of water flows from the nozzle. This primes the pump.
- Turn on the pressure washer using the power switch. The motor will start, and the unit will build pressure.
2. Using the Dual Speed System
Your MPX22EHDS pressure washer features a 2-speed motor for optimized cleaning:
- குறைவான வேகம்: Ideal for delicate surfaces, light cleaning tasks, and energy saving.
- அதிவேகம்: Provides maximum power for stubborn dirt and heavy-duty cleaning.
Select the desired speed using the control dial on the front of the unit.

Image: Graphic illustrating the Dual Speed System with energy saving.
3. Using Detergent (Foam Cannon)
- Fill the foam cannon with an appropriate pressure washer detergent.
- Attach the foam cannon to the high-pressure gun.
- Apply detergent to the surface to be cleaned. Allow it to soak for a few minutes (refer to detergent instructions).
- Remove the foam cannon and re-attach a rinsing nozzle. Rinse the surface thoroughly.

Image: Foam cannon for detergent application.
4. பிரஷர் வாஷரை நிறுத்துதல்
- பவர் சுவிட்சைப் பயன்படுத்தி பிரஷர் வாஷரை அணைக்கவும்.
- தண்ணீர் குழாயை மூடு.
- Squeeze the trigger on the high-pressure gun to release any residual pressure in the system.
- மின் நிலையத்திலிருந்து மின் கம்பியைத் துண்டிக்கவும்.


பராமரிப்பு
1. முனை சுத்தம் செய்தல்
If the nozzle becomes clogged, use the provided nozzle cleaning tool (or a thin wire) to clear any debris. Rinse the nozzle with water.
2. வாட்டர் இன்லெட் ஃபில்டர்
Regularly check the water inlet filter for debris. Remove and rinse it under running water to ensure an unobstructed water flow to the pump.
3. Storage and Winterization
Before storing the pressure washer, especially in areas where temperatures may drop below freezing:
- Drain all water from the pump, hoses, and gun. Run the unit for a few seconds with the water supply disconnected and the trigger squeezed to expel remaining water.
- Store the unit in a dry, protected area, away from direct sunlight and freezing temperatures.
4 பொது சுத்தம்
Wipe down the exterior of the pressure washer with a damp துணி. கடுமையான இரசாயனங்கள் அல்லது சிராய்ப்பு கிளீனர்களைப் பயன்படுத்த வேண்டாம்.
சரிசெய்தல்
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| அழுத்தம் அல்லது குறைந்த அழுத்தம் இல்லை |
|
|
| மோட்டார் ஸ்டார்ட் ஆகவில்லை |
|
|
| துடிப்பு அழுத்தம் |
|
|
| இணைப்புகளிலிருந்து தண்ணீர் கசிவு |
|
|
விவரக்குறிப்புகள்
| அம்சம் | மதிப்பு |
|---|---|
| மாதிரி எண் | MPX22EHDS |
| சக்தி | 2200 டபிள்யூ |
| அதிகபட்ச அழுத்தம் | 160 பார் |
| அதிகபட்ச ஓட்ட விகிதம் | 460 எல்/எச் |
| குழாய் நீளம் | 6 மீட்டர் |
| எடை | 13.31 கிலோகிராம் |
| பரிமாணங்கள் (L x W x H) | 42 x 34.6 x 90.6 செ.மீ |
| சக்தி ஆதாரம் | மின்சார கேபிள் |
| பிறப்பிடமான நாடு | சீனா |

Image: Dimensions of the pressure washer.
உத்தரவாதம் மற்றும் ஆதரவு
For detailed warranty information, please refer to the warranty card included with your product or visit the official MICHELIN webஎந்தவொரு உத்தரவாதக் கோரிக்கைகளுக்கும் உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.
For technical assistance, spare parts, or service inquiries, please contact MICHELIN customer support. Contact details can typically be found on the product packaging or the manufacturer's official webதளம்.