Feit எலக்ட்ரிக் 4 அடி T8 LED யுனிவர்சல் பிளக் & ப்ளே டியூப் லைட் அறிவுறுத்தல் கையேடு

1. அறிமுகம்

Thank you for choosing Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED bulbs. Please read these instructions thoroughly before installation and retain them for future reference.

2. பாதுகாப்பு தகவல்

• Always turn off power at the circuit breaker before installation, removal, or inspection.
• Do not use with dimmers unless explicitly stated on the product or packaging. These bulbs are non-dimmable.
• Ensure the fixture is compatible with Type A (Plug & Play) LED tubes. Refer to the compatible ballast list.
• Do not bend the tube during installation.
• This product is designed for indoor use and suitable for damp இடங்கள்.
• Do not attempt to disassemble or modify the bulb.
• குழந்தைகளுக்கு எட்டாத இடத்தில் வைக்கவும்.

3. தொகுப்பு உள்ளடக்கங்கள்

ஒவ்வொரு தொகுப்பிலும் பின்வருமாறு:

• 4 x Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights

Image: Four Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights, shown in a pack.

Image: Packaging for the Feit Electric 4ft LED Universal Linear Lamp, indicating "Plug & Play (Type A)" and T8/T12 replacement.

4. தயாரிப்பு அம்சங்கள்

• Plug & Play (Type A): Direct installation into existing fluorescent fixtures without rewiring or ballast removal.
• ஆற்றல் சேமிப்பு: Uses 14 watts, replacing 32/40 watt fluorescent bulbs, producing 1700 lumens.
• வெளிர் நிறம்: 3000K Warm White for a soft, crisp light.
• நீண்ட ஆயுட்காலம்: Rated for up to 50,000 hours, reducing replacement frequency.
• உடனடி ஆன்: Provides full brightness immediately with no flickering or strobing.
• Shatterproof Coating: Enhanced durability.
• சான்றிதழ்கள்: UL Listed, DLC Certified, RoHS compliant, 100% mercury-free.

Image: Graphic detailing key product specifications: 14 Watts (equivalent to 40 Watts), 1700 Lumens, G13 Bi-Pin Base, and Plug & Play (Type A) functionality.

Image: Graphic illustrating the product dimensions: 48 inches in length and 1.1 inches in width, highlighting its shatterproof coating.

5. அமைவு மற்றும் நிறுவல்

1. பவர் ஆஃப்: Before beginning installation, ensure the power to the fixture is completely turned off at the circuit breaker.
2. பழைய ஃப்ளோரசன்ட் குழாய்களை அகற்றவும்: Carefully remove the existing fluorescent tubes from the fixture.
3. Check Ballast Compatibility: Verify that your existing ballast is compatible with Type A LED tubes. Refer to the "Compatible Ballasts" section or the product packaging for a list of compatible ballasts.
4. Install LED Tube: Insert the two pins of the Feit Electric LED tube into the lampholders on one end of the fixture. Gently push the tube into place and twist it until it locks securely into the lampholders on both ends. Ensure the tube is firmly seated.
5. சக்தியை மீட்டமை: Once the LED tube is securely installed, restore power at the circuit breaker.
6. சோதனை: சரியான செயல்பாட்டை உறுதிப்படுத்த லைட் சுவிட்சை இயக்கவும்.

Image: Diagram illustrating the "Direct Replacement (Type A)" installation method, showing the LED tube connecting to an existing ballast without rewiring.

Image: A detailed list of various compatible ballasts required for the proper function of the Feit Electric LED tubes.

6. இயக்க வழிமுறைகள்

After successful installation, simply use your existing light switch to turn the Feit Electric LED tube lights on and off. These bulbs provide instant full brightness without any warm-up time or flickering.

Image: An installed Feit Electric LED tube light illuminating a garage, demonstrating instant full brightness without flickering or strobing.

Image: A Feit Electric 3000K Warm White LED tube light installed and emitting a warm, soft light.

7. பராமரிப்பு

Feit Electric LED tube lights are designed for long-term, maintenance-free operation. They have an average life of 50,000 hours. No special cleaning or bulb replacement procedures are typically required during their lifespan. To clean the exterior of the bulb, ensure power is off and wipe with a soft, dry cloth.

8. சரிசெய்தல்

விளக்கு இயக்கப்படவில்லை:

• பவர் ஸ்விட்ச் "ஆன்" நிலையில் இருப்பதை உறுதிசெய்யவும்.
• Check that the circuit breaker is not tripped.
• Verify the LED tube is correctly seated in the lampவைத்திருப்பவர்கள்.
• Confirm your existing ballast is compatible with Type A LED tubes. Incompatible ballasts may prevent the bulb from lighting or cause flickering.
• If replacing multiple bulbs, test each new bulb individually to identify any faulty units.

ஒளி மின்னுகிறது:

• Ensure the LED tube is fully and correctly inserted into the fixture.
• Verify ballast compatibility. An incompatible or failing ballast can cause flickering.

9. விவரக்குறிப்புகள்

10. உத்தரவாதம் மற்றும் ஆதரவு

This Feit Electric bulb comes with a 5 வருட உத்தரவாதம். For warranty claims or technical support, please contact Feit Electric customer service. Refer to the official Feit Electric webமிகவும் புதுப்பித்த தொடர்புத் தகவலுக்கான தளம்.

கூடுதல் தயாரிப்பு தகவலுக்கு, பார்வையிடவும் Feit Electric Storefront.