Zippo Lighter Fluid (12FC) & Butane Fuel (3807) Instruction Manual

தயாரிப்பு முடிந்துவிட்டதுview

This manual provides essential instructions for the safe and effective use of Zippo 12FC Lighter Fluid and Zippo 3807 Butane Fuel. These products are designed to keep your Zippo lighters and other compatible devices operating optimally.

• Zippo 12FC Lighter Fluid (12 Ounce): Specifically formulated for Zippo windproof lighters and Zippo hand warmers. It offers fast ignition, low odor, and a clean-burning flame. This product is made in the USA.
• Zippo 3807 Butane Fuel (75 ml): Designed for use with Zippo flex necks, candle lighters, outdoor utility lighters, and other butane lighters and torches. This premium butane fuel is also made in the USA.

பாதுகாப்பு தகவல்

DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. KEEP AWAY FROM CHILDREN. Read carefully all cautions on the product packaging.

• Contents may be harmful. Fumes may be harmful.
• Do not use or store near fire or flame. Contents may catch fire.
• நன்கு காற்றோட்டமான பகுதியில் மட்டுமே பயன்படுத்தவும்.
• Keep away from heat, sparks, open flames, and other ignition sources.
• Do not inhale contents.
• Do not refuel over containers that could collect spilled fuel.
• If swallowed, do not induce vomiting. Seek medical attention immediately.
• If skin contact occurs, wash with soap and water.
• குழந்தைகள் மற்றும் செல்லப்பிராணிகளுக்கு எட்டாதவாறு வைக்கவும்.

Setup & Usage: Zippo Lighter Fluid (12FC)

For Zippo Windproof Lighters

1. Remove Insert: Open the lighter and firmly pull the insert out of the case.
2. Lift Felt Pad: Turn the insert upside down and lift the felt pad on the bottom to expose the packing material.
3. Saturate Packing Material: Slowly and carefully saturate the packing material with Zippo Lighter Fluid until it is wet but not overflowing. Avoid overfilling.
4. கூறுகளை மாற்றவும்: Lower the felt pad and insert the unit back into the lighter case.
5. சுத்தமான மற்றும் உலர்: Wipe off any excess fluid from the lighter and your hands before attempting to ignite. Ensure the lighter is completely dry before use to prevent accidental ignition of spilled fuel.

படம் 1: முன் view of Zippo 12FC Lighter Fluid can.

படம் 2: பின் view of Zippo 12FC Lighter Fluid can, showing safety warnings and instructions.

Setup & Usage: Zippo Butane Fuel (3807)

For Butane Lighters and Devices

1. இணக்கத்தன்மையை சரிபார்க்கவும்: Ensure your device is specifically designed for butane fuel.
2. மீண்டும் நிரப்புவதற்குத் தயாராகுங்கள்: Hold the Zippo Butane Fuel can upside down.
3. Insert Nozzle: Firmly insert the nozzle of the butane can directly into the refill valve of your device.
4. மறு நிரப்பு: Press down firmly for 5-6 seconds. You may hear a slight hiss as the fuel transfers. Repeat this process if necessary until the device is adequately filled.
5. Stabilize Fuel: After refilling, wait a few minutes for the fuel to stabilize and reach room temperature before attempting to ignite the device. This helps ensure proper ignition and flame stability.

படம் 3: முன் view of Zippo 3807 Butane Fuel can.

Figure 4: Zippo 3807 Butane Fuel can with the nozzle extended, ready for refilling.

படம் 5: பின் view of Zippo 3807 Butane Fuel can, displaying safety information and usage instructions.

பராமரிப்பு

• சேமிப்பு: Store both Zippo Lighter Fluid and Butane Fuel in a cool, dry place, away from direct sunlight, heat sources, and any potential ignition sources.
• Container Integrity: Always keep the containers tightly closed when not in use to prevent evaporation and accidental spills.
• அகற்றல்: Dispose of empty containers and any residual fuel according to local environmental regulations. Do not puncture or incinerate cans.

சரிசெய்தல்

• Lighter Not Igniting (Lighter Fluid):
  • Check the fuel level. If low, refill as per instructions.
  • Inspect the wick. If it's too short or charred, pull it up and trim it.
  • Ensure the flint is present and striking properly. Replace if worn.
• Butane Device Not Igniting (Butane Fuel):
  • Check the fuel level. If low, refill as per instructions, ensuring the nozzle is fully inserted into the refill valve.
  • Allow a few minutes after refilling for the butane to stabilize before attempting ignition.
  • Ensure the flame adjustment is not set too low.

விவரக்குறிப்புகள்

உத்தரவாதம் & ஆதரவு

Specific warranty information for Zippo Lighter Fluid and Butane Fuel is not provided in the product details. For general product inquiries or support, please refer to the official Zippo webதளத்தில் அல்லது அவர்களின் வாடிக்கையாளர் சேவையை நேரடியாகத் தொடர்பு கொள்ளவும்.