Digitus DN-10130-1

DIGITUS Gigabit Ethernet Network Card User Manual

Model: DN-10130-1

அறிமுகம்

This manual provides comprehensive instructions for the installation, operation, and maintenance of your DIGITUS Gigabit Ethernet Network Card. This PCI Express network card is designed to equip your PC with an additional Gigabit Ethernet port, enabling high-speed data transfer up to 1000 Mbps over existing network cabling. It includes a low-profile slot panel, making it suitable for various computer chassis sizes.

DIGITUS Gigabit Ethernet Network Card

Figure 1: DIGITUS Gigabit Ethernet Network Card (Main View)
This image shows the overall view of the DIGITUS Gigabit Ethernet Network Card, highlighting its PCI Express interface and the RJ45 port.

தொகுப்பு உள்ளடக்கங்கள்

Before proceeding with the installation, please verify that all components are present in the package:

  • கிகாபிட் ஈதர்நெட் பிசிஐ எக்ஸ்பிரஸ் நெட்வொர்க் கார்டு
  • குறைந்த ப்ரோfile ஸ்லாட் தட்டு
  • விரைவு தொடக்க வழிகாட்டி
  • Support CD-ROM (containing drivers and utilities)
DIGITUS Network Card with Low Profile அடைப்புக்குறி

Figure 2: Network Card with Included Low Profile அடைப்புக்குறி
This image displays the network card alongside the additional low-profile bracket, which can be used for installation in smaller computer cases.

அமைவு மற்றும் நிறுவல்

Follow these steps carefully to install your network card:

  1. பவர் ஆஃப் மற்றும் துண்டிக்கவும்: உங்கள் கணினியை முழுவதுமாக அணைத்துவிட்டு, சுவர் கடையிலிருந்து மின் கேபிளைத் துண்டிக்கவும்.
  2. கணினிப் பெட்டியைத் திற: மதர்போர்டை அணுக உங்கள் கணினி உறையின் பக்கவாட்டுப் பலகத்தை அகற்றவும்.
  3. Locate PCI Express Slot: Identify an available PCI Express (PCIe) slot on your motherboard. The card requires a PCIe x1 slot or larger (e.g., x4, x8, x16).
  4. ஸ்லாட் கவரை அகற்று: Carefully remove the metal slot cover from the back of your computer case corresponding to the chosen PCIe slot. If installing in a small form factor PC, you may need to replace the standard bracket on the network card with the included low-profile அடைப்புக்குறி.
  5. நெட்வொர்க் கார்டைச் செருகவும்: Align the network card with the PCIe slot and press it firmly and evenly until it is securely seated. Ensure the bracket is flush with the back of the case.
  6. பாதுகாப்பான அட்டை: Secure the network card with the screw or latch mechanism provided by your computer case.
  7. கேஸை மூடிவிட்டு மீண்டும் இணைக்கவும்: Replace the computer case side panel and reconnect all cables, including the power cable.
  8. Power On and Install Drivers: Power on your computer. Once the operating system loads, insert the provided Support CD-ROM to install the necessary drivers. Alternatively, you can download the latest drivers from the Digitus official webஇயக்கி நிறுவலை முடிக்க திரையில் உள்ள வழிமுறைகளைப் பின்பற்றவும்.
PCIe Connector of Network Card

Figure 3: PCIe Connector Detail
இந்தப் படம் ஒரு நெருக்கமான காட்சியை வழங்குகிறது. view of the PCI Express connector on the network card, which plugs into the motherboard.

இயக்க வழிமுறைகள்

Once the network card is physically installed and drivers are successfully loaded, you can begin using it:

  1. ஈதர்நெட் கேபிளை இணைக்கவும்: Plug a standard RJ45 Ethernet cable from your network router, switch, or modem into the RJ45 port on the newly installed network card.
  2. இணைப்பைச் சரிபார்க்கவும்: Observe the LED indicators on the RJ45 port. Typically, one LED indicates link activity (data transfer) and the other indicates connection speed (e.g., green for Gigabit, amber for 100 Mbps). Refer to the image below for LED locations.
  3. பிணைய கட்டமைப்பு: Your operating system should automatically detect the new network connection. You may need to configure network settings (e.g., IP address, DNS) if your network does not use DHCP.
  4. சோதனை இணைப்பு: திற a web browser or use network diagnostic tools to confirm internet access and network connectivity.
RJ45 Port and LED Indicators

Figure 4: RJ45 Port with LED Indicators
This image shows the RJ45 Ethernet port on the network card, along with the two LED indicators that provide visual feedback on network link status and activity.

பராமரிப்பு

The DIGITUS Gigabit Ethernet Network Card is designed for reliable operation with minimal maintenance. However, consider the following:

  • இயக்கி புதுப்பிப்புகள்: Periodically check the Digitus official website for updated drivers. Keeping drivers current can improve performance and resolve compatibility issues.
  • உடல் பரிசோதனை: If you experience network issues, a physical inspection of the card and cable connections can be helpful. Ensure the card is securely seated in its PCIe slot and the Ethernet cable is firmly connected.
  • தூசி அகற்றுதல்: Over time, dust can accumulate inside your computer case. If necessary, carefully clean the area around the network card using compressed air to prevent overheating. Ensure the computer is powered off and unplugged before cleaning.

சரிசெய்தல்

If you encounter issues with your network card, refer to the following troubleshooting tips:

  • நெட்வொர்க் இணைப்பு இல்லை:
    • Ensure the Ethernet cable is securely connected to both the network card and your router/switch.
    • Verify that the network card is properly seated in the PCIe slot.
    • Check if the network card drivers are correctly installed in your operating system's Device Manager. Reinstall drivers if necessary.
    • Test with a different Ethernet cable or port on your router/switch.
  • மெதுவான நெட்வொர்க் வேகம்:
    • Ensure your router/switch supports Gigabit Ethernet (1000 Mbps).
    • Verify that the Ethernet cable is a Cat5e or Cat6 cable, suitable for Gigabit speeds.
    • Check for updated drivers for the network card.
    • Confirm that your operating system's network settings are configured for full duplex and Gigabit speed (if applicable).
  • இயக்கி நிறுவல் சிக்கல்கள்:
    • Ensure you are installing the correct drivers for your operating system version (e.g., Windows 10, 64-bit).
    • Temporarily disable antivirus software during driver installation if it interferes.
    • Try installing drivers in compatibility mode if experiencing issues on newer operating systems.

விவரக்குறிப்புகள்

அம்சம்விவரம்
பிராண்ட்டிஜிட்டஸ்
மாதிரி எண்டிஎன் -10130-1
வன்பொருள் இடைமுகம்PCI Express (PCIe x1), Ethernet
தரவு இணைப்பு நெறிமுறைகிகாபிட் ஈதர்நெட் (10/100/1000 Mbps)
தரவு பரிமாற்ற வீதம்வினாடிக்கு 1000 மெகாபிட்ஸ்
இணக்கமான சாதனங்கள்டெஸ்க்டாப் பிசிக்கள்
சிப்செட்Realtek RTL8111H
தயாரிப்பு பரிமாணங்கள்5.51 x 7.87 x 1.38 அங்குலம்
பொருளின் எடை0.035 அவுன்ஸ் (தோராயமாக 1 கிராம்)
நிறம்கருப்பு

உத்தரவாதம் மற்றும் ஆதரவு

DIGITUS products are designed for quality and reliability. This product comes with a standard limited warranty. Please refer to the warranty information provided on the Support CD-ROM or the official Digitus webகுறிப்பிட்ட விதிமுறைகள் மற்றும் நிபந்தனைகளுக்கான தளம்.

For technical support, driver downloads, or further assistance, please visit the official Digitus support website or refer to the contact information provided in the Quick Start Guide included with your product. The included Support CD-ROM also contains drivers and additional resources.

EU Spare Part Availability Duration: 1 Year

© 2024 Digitus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.