BRONC Staves Wireless Tattoo Machine User Manual

1. அறிமுகம்

This manual provides essential information for the safe and effective use of your BRONC Staves Wireless Rotary Tattoo Machine. Designed with advanced technology and a Swiss motor, this pen offers powerful and stable performance. Please read these instructions carefully before operating the device.

The BRONC Staves Wireless Tattoo Machine features a lightweight design, an 1800mAh battery for extended operation, and a Type-C fast charging port. It incorporates an OLED display for clear information and includes safety features such as overload and overcurrent protection.

படம் 1: மேல்view of the BRONC Staves Wireless Tattoo Machine.

2. பாதுகாப்பு தகவல்

Always prioritize safety and hygiene when using tattoo equipment. This device is intended for professional use only. Improper use can lead to injury or damage to the machine.

• Ensure the machine is clean and sterilized according to industry standards before each use.
• Do not operate the machine if it appears damaged or malfunctioning.
• Keep the machine away from water and excessive moisture. The device has a water-resistant rating, but it is not waterproof.
• Use only compatible needle cartridges.
• இயந்திரத்தின் அம்சங்கள் overload and overcurrent protection, which automatically powers off the device during a malfunction.
• A 0.2-second 9V jump start feature is included for reliable startup.

3. தயாரிப்பு முடிந்துவிட்டதுview

The BRONC Staves machine is constructed from aircraft-grade aluminum, providing durability and a lightweight feel. It is available in multiple colors.

Figure 2: The machine supports both wireless and wired operation via an RCA converter.

Figure 3: The body is crafted from aviation-grade aluminum alloy for durability.

Figure 4: The machine is equipped with a powerful Swiss motor.

Figure 5: The BRONC Staves machine is available in multiple color options.

4 அமைவு

4.1 சாதனத்தை சார்ஜ் செய்தல்

Before initial use, fully charge the machine. The integrated 1800mAh battery provides approximately 4-7 hours of working time. Charging takes 2-2.5 hours using the provided Type-C fast charge cord.

• Connect the Type-C cable to the charging port on the machine.
• கேபிளின் மறுமுனையை இணக்கமான USB பவர் அடாப்டருடன் இணைக்கவும் (சேர்க்கப்படவில்லை).
• OLED காட்சி சார்ஜிங் நிலையைக் குறிக்கும்.

Figure 6: Charging the BRONC Staves machine via Type-C port.

4.2 Installing and Adjusting Needle Cartridges

The BRONC Staves machine is compatible with most standard integrated needle cartridges (suitable for over 90% of tattoo pens on the market).

1. Insert the desired needle cartridge into the machine's rotary needle output.
2. Twist the grip to adjust the needle depth. The adjustable range is 0-4mm.
3. The machine has a fixed stroke length of 3.5mm.

Figure 7: Adjusting needle depth and noting the fixed stroke length.

Figure 8: The rotary needle output is designed for simple and convenient cartridge installation.

படம் 9: ஒரு முன்னாள்ample of a compatible integrated needle cartridge.

4.3 RCA Converter (Wired Mode)

The machine includes an RCA converter for seamless transitions between independent wireless operation and traditional wired power supply use. To use wired mode, attach the RCA converter to the machine and connect it to an external power supply (not included).

5. இயக்க வழிமுறைகள்

5.1 பவர் ஆன்/ஆஃப்

Press and hold the power button (typically located on the OLED display panel) to turn the machine on or off.

5.2 தொகுதியை சரிசெய்தல்tage

The machine offers a voltage output range of 5.0V-12.0V, with a recommended working voltage of 5.5V-7.5V for optimal performance. Voltage can be adjusted in 0.1V increments.

• Use the '+' and '-' buttons on the OLED display to increase or decrease the voltage.
• தற்போதைய தொகுதிtage setting is displayed on the OLED screen.

Figure 10: The OLED display provides clear information on battery status and voltage.

Figure 11: The three-button design allows for easy operation.

5.3 Jump Start Feature

The machine includes a 0.2-second 9V jump start feature to assist with starting larger needle configurations or when a quick power boost is needed.

6. பராமரிப்பு

6.1 சுத்தம் செய்தல் மற்றும் கிருமி நீக்கம் செய்தல்

Proper cleaning and sterilization are crucial for hygiene and machine longevity.

• Always disconnect the machine from any power source before cleaning.
• Wipe down the exterior of the machine with a suitable disinfectant wipe or spray.
• இயந்திரத்தை திரவங்களில் மூழ்கடிக்க வேண்டாம்.
• Ensure all components are dry before reassembly or storage.

6.2 பேட்டரி பராமரிப்பு

• Avoid completely draining the battery regularly to prolong its lifespan.
• பயன்பாட்டில் இல்லாத போது இயந்திரத்தை குளிர்ந்த, உலர்ந்த இடத்தில் சேமிக்கவும்.
• Charge the battery periodically if the machine is stored for extended periods.

7. சரிசெய்தல்

If you encounter issues with your BRONC Staves Wireless Tattoo Machine, refer to the following common troubleshooting steps:

• இயந்திரம் இயக்கப்படவில்லை: Ensure the battery is sufficiently charged. Connect the Type-C charger and attempt to power on.
• Inconsistent Power/Stuttering: Check the battery level. If using wired mode, ensure the RCA connection is secure and the external power supply is functioning correctly.
• Needle Not Moving Correctly: Verify that the needle cartridge is properly installed and not damaged. Check for any obstructions in the needle output mechanism.
• தானியங்கி பணிநிறுத்தம்: இந்த இயந்திரம் overload and overcurrent protection. If it shuts down unexpectedly, this may indicate an internal issue or excessive load. Disconnect the machine, allow it to cool, and then attempt to restart. If the issue persists, contact customer support.
• OLED Display Not Responding: Ensure the machine is powered on. If the display remains unresponsive, try charging the device.

8. விவரக்குறிப்புகள்

9. தயாரிப்பு வீடியோ

10. உத்தரவாதம் மற்றும் ஆதரவு

The product is subject to a 30 நாள் ரிட்டர்ன் பாலிசி. For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact BRONC customer support through your purchase platform or the official BRONC webதளம்.