தயாரிப்பு முடிந்துவிட்டதுview
The Phrozen Water-Washable Rapid Black Resin is a 405nm LCD UV-Curing photopolymer resin designed for high-precision 3D printing. This resin offers ease of use and post-processing due to its water-washable properties, low viscosity, and low odor. It is formulated to produce sturdy and tough printed parts, making it suitable for various models and prototyping applications.
Image: A bottle of Phrozen Water-Washable Rapid Black Resin positioned next to a highly detailed black 3D printed model, showcasing the resin's capability for intricate designs.
பாதுகாப்பு தகவல்
When handling Phrozen Water-Washable Rapid Black Resin, it is crucial to follow safety guidelines to prevent direct skin contact and ensure proper disposal. Always work in a well-ventilated area.
- பரிந்துரைக்கப்பட்ட வெப்பநிலை: Maintain a working temperature between 20°C - 25°C for optimal resin performance.
- தனிப்பட்ட பாதுகாப்பு உபகரணங்கள்: Always wear gloves and a mask to avoid direct skin contact and inhalation of fumes.
- சேமிப்பு: Keep the resin away from children, dust, and direct sunlight to maintain its quality and prevent premature curing.
- அவசர தொடர்பு: In case of direct skin contact with resin, wash immediately with plenty of water. Seek medical attention if irritation persists.
- கழிவு நீக்கம்: Do NOT dump waste water directly. Cure the waste water with sunlight OR add 10% Waste Disposal Agent and filter the residue before dumping. This ensures environmental safety.
Image: A bottle of Phrozen Water-Washable Rapid Black Resin with text overlay highlighting important safety precautions and usage tips, including recommended temperature, wearing PPE, and proper disposal.
அமைப்பு மற்றும் தயாரிப்பு
- பாட்டிலை அசை: Before each use, shake the resin bottle well to ensure the photopolymer components are thoroughly mixed.
- அச்சுப்பொறியைத் தயாரிக்கவும்: Ensure your 405nm LCD 3D printer is clean and ready for operation. Check the FEP film for any damage or residue.
- Pour Resin: Carefully pour the Phrozen Water-Washable Rapid Black Resin into the printer's resin vat. Avoid overfilling.
Image: A close-up of a hand pouring the black resin into the printer's vat, demonstrating the resin's low viscosity and ease of pouring.
இயக்க வழிமுறைகள்
Phrozen Water-Washable Rapid Resin is optimized for 405nm LCD printers, designed for fast printing without compromising quality.
- Slicer Settings: Refer to your 3D printer's specific slicer software for recommended exposure times and layer heights. For this resin, a recommended layer height is 30-100 µm.
- அச்சிடத் தொடங்கு: Initiate the printing process according to your printer's instructions. The resin's rapid curing properties contribute to faster print times.
- மானிட்டர் அச்சு: Observe the initial layers to ensure proper adhesion and formation.
Video: This video demonstrates the capabilities of Phrozen 3D printers and the precision achievable with their resins, including the ease of use and high-speed printing features. It showcases various applications, from artistic models to dental molds, highlighting the versatility of the Phrozen ecosystem.
Maintenance and Post-Processing
Proper post-processing is essential for achieving the best results and durability from your prints.
- சுத்தம்: Unlike standard resins, Phrozen Water-Washable Resin can be cleaned with water. Rinse the printed part thoroughly with water to remove uncured resin. For best results, use a soft brush or ultrasonic cleaner.
- உலர்த்துதல்: Ensure the cleaned part is completely dry before post-curing. You can use compressed air or allow it to air dry.
- பிந்தைய குணப்படுத்துதல்: Cure the cleaned and dried part under UV light (405nm) to achieve maximum hardness and strength. The resin is designed to be tough and non-brittle after proper curing.
- Support Removal: Printed parts are sturdy, allowing for easier support removal. Carefully remove supports using appropriate tools.
Image: A 3D printed model is shown being rinsed under flowing water, emphasizing the water-washable characteristic of the resin for easy cleanup.
Image: A side-by-side comparison of two ghost-shaped 3D printed models. One, labeled "phrozen", is smooth and intact, while the other, labeled "others", shows visible cracks, illustrating the superior toughness and non-brittle nature of Phrozen resin.
சரிசெய்தல்
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| அச்சுப்பொறி பில்ட் பிளேட்டுடன் ஒட்டவில்லை | Insufficient bottom exposure time, cold resin/environment, dirty build plate. | Increase bottom exposure time. Ensure resin and room temperature are within 20-25°C. Clean and level the build plate. |
| Printed Part is Brittle | Insufficient post-curing, over-exposure during printing. | Increase post-curing time under UV light. Reduce normal exposure time slightly if over-exposure is suspected. |
| Sticky/Tacky Surface After Cleaning | Incomplete cleaning, insufficient drying before curing. | Rinse thoroughly with water, ensuring all uncured resin is removed. Ensure the part is completely dry before post-curing. |
| Poor Print Detail/Resolution | Incorrect layer height, resin not properly mixed, printer calibration issues. | Verify layer height settings (30-100 µm recommended). Shake resin bottle well before use. Calibrate your printer if necessary. |
தயாரிப்பு விவரக்குறிப்புகள்
- எடை: 1KG per bottle
- XY தீர்மானம்: 50 μm
- Recommended Layer Height: 30-100 µm
- Curing Wavelength: 405nm UV ஒளி
- பாகுத்தன்மை: குறைந்த
- வாசனை: குறைந்த
- பண்புகள்: Water-Washable, Tough, Non-Brittle, Fast-Printing
- தயாரிப்பு பரிமாணங்கள்: 3.5 x 3.5 x 8.2 அங்குலம்
- பொருளின் எடை: 1 கிலோகிராம்
- உற்பத்தியாளர்: PHROZEN TECH CO., LTD.
- முதல் தேதி கிடைக்கும்: ஜூன் 12, 2020
உத்தரவாதம் மற்றும் ஆதரவு
For detailed warranty information, technical support, or further inquiries regarding your Phrozen Water-Washable Rapid Black Resin, please visit the official Phrozen webதளத்தில் அல்லது அவர்களின் வாடிக்கையாளர் சேவையைத் தொடர்பு கொள்ளவும். உத்தரவாதக் கோரிக்கைகளுக்கு உங்கள் கொள்முதல் ரசீதை வைத்திருங்கள்.
Phrozen Official Webதளம்: www.phrozen3d.com
அமேசான் ஸ்டோர்: Phrozen Amazon Store