BRONC V2 Tattoo Machine & Cartridges User Manual

1. தயாரிப்பு முடிந்துவிட்டதுview

This manual provides instructions for the BRONC V2 Tattoo Machine Rotary Pen and the accompanying 50-piece assorted tattoo cartridge needles. This bundle is designed for professional tattooing, offering precision and reliability.

தொகுப்பு உள்ளடக்கம்:

• BRONC V2 Tattoo Machine Rotary Pen (Grey)
• Type-C Fast Charge Cord
• Two (2) Rechargeable Batteries (2000mAh each)
• பேட்டரி சார்ஜர்
• RCA Head Replacement
• ஓ-மோதிரங்கள்
• 50 Mixed BRONC Tattoo Cartridge Needles (10 pieces each of 1203RL, 1205RL, 1207RL, 1209RL, 1211RL)

Figure 1: BRONC V2 Tattoo Machine Rotary Pen. This image shows the main tattoo machine with its digital display and control buttons.

2. அமைவு வழிமுறைகள்

2.1 பேட்டரியை சார்ஜ் செய்தல்

1. Connect the provided Type-C fast charge cord to the charging port on the battery or the dedicated battery charger.
2. Plug the other end of the cord into a suitable USB power adapter (not included).
3. The battery indicator on the machine or charger will show charging status. A full charge typically takes 2 to 2.5 hours.
4. Ensure both batteries are fully charged before extended use. Each battery provides approximately 7-9 hours of continuous work time.

2.2 Assembling the Tattoo Pen

1. If the pen is disassembled, carefully screw the grip section onto the main body of the machine until secure.
2. Insert a charged battery into the designated compartment.

Figure 2: Disassembled BRONC V2 Tattoo Machine. This image illustrates the main body, grip, and battery components of the tattoo pen, ready for assembly.

2.3 Attaching a Cartridge Needle

1. Select the desired BRONC tattoo cartridge needle from the assorted pack. Ensure the needle is sterile and individually packaged.
2. Carefully push the cartridge needle into the front opening of the tattoo pen until it clicks securely into place. The silicone membrane system prevents ink backflow.
3. To remove, gently twist and pull the cartridge out.

Figure 3: BRONC Tattoo Cartridge Needle. This image displays a single, clear tattoo cartridge needle, highlighting its design and the internal mechanism.

Figure 4: BRONC Assorted Tattoo Cartridge Needles. This image shows a box of 50 assorted BRONC tattoo cartridge needles, with two individual cartridges displayed prominently.

3. இயக்க வழிமுறைகள்

3.1 பவர் ஆன்/ஆஃப்

• To power on the machine, press and hold the power button (usually marked with a ⑂ symbol) for a few seconds until the display illuminates.
• பவரை ஆஃப் செய்ய, டிஸ்ப்ளே அணையும் வரை பவர் பட்டனை மீண்டும் அழுத்திப் பிடிக்கவும்.

3.2 தொகுதிtagஇ சரிசெய்தல்

• Once powered on, the current voltage காட்டப்படும்.
• Use the '+' and '-' buttons to increase or decrease the voltage. The adjustable range is 5.0V to 11.0V.
• பரிந்துரைக்கப்பட்ட வேலை தொகுதிtage for optimal performance is 5.5V to 7.5V.

3.3 Jump Start Function

• The machine features a 9.0V jump start function to assist with starting larger needle configurations or when the machine requires an initial power boost.
• Consult the machine's specific controls for activating the jump start, typically a quick press of the power button or a dedicated button.

3.4 Needle Depth Adjustment

• The needle depth can be adjusted from 0mm to 4mm.
• To adjust, rotate the grip section of the tattoo pen clockwise or counter-clockwise. Rotate clockwise to extend the needle further out, and counter-clockwise to retract it.

Figure 5: BRONC V2 Tattoo Machine with display. This image highlights the digital display showing the voltage and battery level, along with the control buttons for operation.

4. பராமரிப்பு

4.1 இயந்திரத்தை சுத்தம் செய்தல்

• After each use, disconnect the power and remove the needle cartridge.
• Wipe down the exterior of the machine with a sterile wipe or a cloth dampened with an approved disinfectant solution.
• வேண்டாம் immerse the machine in liquid or allow liquids to enter the motor housing or charging port.
• Ensure all surfaces are dry before storage.

4.2 பேட்டரி பராமரிப்பு மற்றும் சேமிப்பு

• நேரடி சூரிய ஒளி மற்றும் தீவிர வெப்பநிலையிலிருந்து விலகி குளிர்ந்த, உலர்ந்த இடத்தில் பேட்டரிகளை சேமிக்கவும்.
• Avoid fully discharging the batteries regularly to prolong their lifespan. Recharge them when the power level is low.
• If storing for an extended period, charge the batteries to approximately 50-60% capacity.

4.3 Needle Cartridge Disposal

• Used needle cartridges are biohazardous waste. Dispose of them immediately after use in an approved sharps container.
• Follow all local regulations and guidelines for the safe disposal of sharps.

5. சரிசெய்தல்

5.1 Machine Not Turning On

• பேட்டரி முழுமையாக சார்ஜ் செய்யப்பட்டு சரியாகச் செருகப்பட்டுள்ளதா என்பதை உறுதிப்படுத்தவும்.
• Press and hold the power button for the required duration (typically a few seconds).

5.2 Inconsistent Power/Motor Issues

• பேட்டரி அளவை சரிபார்க்கவும்; குறைவாக இருந்தால் ரீசார்ஜ் செய்யவும்.
• Ensure the needle cartridge is properly seated and not jammed.
• The machine features OCP (Overload Current Protection) and short circuit protection. If an issue is detected, the machine may shut down or display an error. Remove the cartridge and restart. If the problem persists, contact support.

5.3 Needle Not Extending/Retracting

• Verify the needle cartridge is correctly inserted and not damaged.
• Check if the grip is rotating freely for depth adjustment.

6. விவரக்குறிப்புகள்

7. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact BRONC customer service directly. Keep your proof of purchase for any warranty claims.

You can typically find contact information on the official BRONC webதளத்திலோ அல்லது உங்கள் சில்லறை விற்பனையாளர் மூலமாகவோ.