Wattsaving EV Charger Instruction Manual

1. அறிமுகம்

Thank you for choosing the Wattsaving EV Charger. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your electric vehicle charging station. Please read this manual thoroughly before using the product and retain it for future reference.

The Wattsaving EV Charger is designed to provide reliable and fast charging for electric vehicles equipped with a Type 2 charging port. It supports both three-phase (22kW/11kW) and single-phase (7kW/3.5kW) charging, offering versatility for various electrical installations and vehicle requirements.

2. பாதுகாப்பு தகவல்

Your safety and the proper functioning of the charger are paramount. Observe all warnings and precautions listed below.

• தொழில்முறை நிறுவல்: அனைத்து உள்ளூர் மற்றும் தேசிய மின் குறியீடுகள் மற்றும் விதிமுறைகளின்படி தகுதிவாய்ந்த எலக்ட்ரீஷியனால் நிறுவல் செய்யப்பட வேண்டும்.
• மின் ஆபத்து: Do not attempt to open, disassemble, repair, or modify the charger. High voltage is present inside, which can cause severe injury or death.
• நீர் மற்றும் ஈரப்பதம்: Although the charger has an IP65-rated enclosure, avoid submerging it in water or exposing it to excessive moisture. Ensure hands are dry when handling the charging cable and connector.
• கேபிள் ஒருமைப்பாடு: Regularly inspect the charging cable and connector for any signs of damage, wear, or fraying. Do not use the charger if the cable or connector is damaged.
• அவசர நிறுத்தம்: In case of an emergency, immediately press the emergency stop button on the charger (if available) or disconnect power at the circuit breaker.
• குழந்தைகள் மற்றும் செல்லப்பிராணிகள்: Keep children and pets away from the charging station during operation.

The Wattsaving EV Charger incorporates multiple safety features, including:

• CE சான்றிதழ்
• Type A Residual Current Device (RCD)
• மின்னல் பாதுகாப்பு
• ஓவர்வோல்tagஇ பாதுகாப்பு
• அண்டர்வால்tagஇ பாதுகாப்பு
• ஓவர் கரண்ட் பாதுகாப்பு
• அதிக வெப்பநிலை பாதுகாப்பு
• எமர்ஜென்சி ஸ்டாப் பட்டன்

3. தயாரிப்பு முடிந்துவிட்டதுview

Image 1: Wattsaving EV Charger unit with integrated Type 2 charging cable and wall mount.

The Wattsaving EV Charger is a wall-mounted charging station designed for home or private use. It features a robust enclosure and an integrated charging cable.

முக்கிய கூறுகள்:

• Charger Unit: The main housing containing the electronics and control interface.
• Type 2 Charging Cable (5 meters): Permanently attached cable with a Type 2 connector for vehicle connection.
• RFID அட்டை: Used for secure activation and deactivation of charging sessions.
• LED காட்டி: Provides status feedback on charging and operational modes.
• சுவர் மவுண்ட்: Bracket for secure installation of the charger unit.

அம்சங்கள்:

• வேகமாக சார்ஜ் செய்தல்: Up to 22 kW, adding approximately 120 km of range per hour of charging.
• பாதுகாப்பான சார்ஜிங்: RFID card activation ensures only authorized users can initiate charging.
• Durable Enclosure: IP65-rated for water and dust resistance, suitable for various weather conditions.
• பல்துறை பொருந்தக்கூடிய தன்மை: Type 2 cable is compatible with a wide range of electric vehicles.

4. விவரக்குறிப்புகள்

Image 2: Charger highlighting fast charging capabilities (up to 32 Amp, 400 Volt, 120 km/h at 22kW).

Image 3: Charger illustrating its comprehensive safety features, including CE certification and various protections.

5. அமைவு மற்றும் நிறுவல்

The Wattsaving EV Charger requires professional installation. It is crucial that a qualified and certified electrician performs the installation to ensure compliance with all electrical safety standards and local regulations.

பொதுவான நிறுவல் படிகள் (தகுதிவாய்ந்த பணியாளர்களுக்கு):

1. தளத் தேர்வு: Choose a suitable location for the charger, preferably near your parking spot, with access to the main electrical panel. Ensure the surface is sturdy enough to support the charger's weight.
2. மின்சாரம்: Ensure the electrical circuit can support the charger's power requirements (up to 32A, 400V for 22kW three-phase). A dedicated circuit with appropriate overcurrent protection (circuit breaker) and a Residual Current Device (RCD) is mandatory.
3. மவுண்டிங்: Securely mount the charger unit to the wall using the provided mounting bracket and hardware. Ensure it is level and at an appropriate height for easy access.
4. வயரிங்: Connect the charger to the main electrical supply. Follow the wiring diagram provided with the product packaging. Ensure all connections are tight and correctly insulated.
5. சோதனை: After installation, the electrician must perform thorough testing to verify proper functionality and safety before initial use.

6. இயக்க வழிமுறைகள்

Operating the Wattsaving EV Charger is straightforward once installed.

Initiating a Charging Session:

1. வாகனத்துடன் இணைக்கவும்: Open your vehicle's charging port and firmly insert the Type 2 charging connector from the Wattsaving EV Charger into the vehicle's inlet. Ensure it clicks into place.
2. Activate with RFID: Hold your RFID card against the designated RFID reader area on the charger unit. The charger's LED indicator will change, typically to a solid green or blue, indicating that charging has started.
3. மானிட்டர் சார்ஜிங்: The LED indicator on the charger and your vehicle's dashboard will show the charging status.

Image 4: Demonstrating the use of an RFID card to initiate a secure charging session.

Ending a Charging Session:

1. Deactivate with RFID: Hold your RFID card against the reader again. The charger will stop the charging process.
2. Disconnect from Vehicle: Once charging has stopped, unlock the charging cable from your vehicle (if necessary, via your vehicle's controls) and carefully remove the Type 2 connector.
3. ஸ்டோர் கேபிள்: Return the charging cable to its designated holder on the wall mount to prevent damage and keep the area tidy.

7. பராமரிப்பு

Regular maintenance ensures the longevity and safe operation of your Wattsaving EV Charger.

• சுத்தம்: The charger's IP65-rated enclosure is durable and resistant to water and dust. Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or high-pressure water jets. Ensure the charger is powered off before cleaning.
• கேபிள் மற்றும் இணைப்பான் ஆய்வு: Periodically inspect the charging cable and connector for any signs of damage, cracks, discoloration, or excessive wear. If any damage is observed, discontinue use and contact customer support.
• சேமிப்பு: When not in use, ensure the charging cable is neatly coiled and stored on its holder to prevent tripping hazards and damage.

Image 5: The charger's IP65-rated enclosure ensures durability and protection against environmental elements.

8. சரிசெய்தல்

If you encounter issues with your Wattsaving EV Charger, refer to the following common problems and solutions:

• Charger Not Starting:
  • Ensure the charger is properly connected to the main power supply and the circuit breaker is ON.
  • Verify the charging cable is securely connected to both the charger and the vehicle.
  • Confirm the RFID card is correctly tapped to initiate the session.
  • Check the charger's LED indicator for any error codes or status lights.
• மெதுவாக சார்ஜிங்:
  • Ensure your vehicle is capable of accepting the charger's maximum power output.
  • Check your vehicle's charging settings.
  • Verify the electrical installation supports the desired power level (e.g., three-phase supply for 22kW).
• Charging Stops Unexpectedly:
  • This could indicate a safety protection activation (e.g., overtemperature, overcurrent). Check the charger's LED indicator for fault signals.
  • தளர்வான இணைப்புகள் இல்லை என்பதை உறுதிப்படுத்திக் கொள்ளுங்கள்.
  • சிக்கல் தொடர்ந்தால், வாடிக்கையாளர் ஆதரவைத் தொடர்பு கொள்ளவும்.
• RFID Card Not Recognized:
  • Ensure the card is placed directly over the RFID reader area.
  • Try another RFID card if available.

For persistent issues or complex problems, please contact Wattsaving technical support.

9. உத்தரவாதம் மற்றும் ஆதரவு

The Wattsaving EV Charger comes with a 2 வருட உத்தரவாதம் from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or natural disasters.

For warranty claims, technical assistance, or any questions regarding your Wattsaving EV Charger, please contact Wattsaving customer support. Provide your model number (E22-BLACK-V) and proof of purchase when contacting support.

உற்பத்தியாளர்: ஷென்ஜென் வாட்சேவிங் எலக்ட்ரிக்கல் டெக்னாலஜி கோ., லிமிடெட்