aigo ACSE240-BK

Aigo AC SE 240 Rainbow 240mm Water Cooler Instruction Manual

Model: ACSE240-BK

1. தயாரிப்பு முடிந்துவிட்டதுview

The Aigo AC SE 240 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient thermal management for your computer's processor. Featuring a 240mm radiator and two fans with Rainbow lighting, it offers effective cooling performance for a wide range of Intel and AMD sockets.

This manual provides essential information for the proper installation, operation, and maintenance of your Aigo AC SE 240 Water Cooler.

2. தொகுப்பு உள்ளடக்கங்கள்

Please verify that all components listed below are present in your package before proceeding with the installation.

Aigo AC SE 240 Water Cooler components including radiator, pump, fans, and mounting hardware

படம்: All components included with the Aigo AC SE 240 Water Cooler, laid out on a white background. This includes the radiator with two fans, the CPU block/pump, tubing, various mounting brackets for Intel and AMD sockets, screws, thermal paste, and a fan/RGB controller.

  • 240mm Radiator with integrated pump/CPU block and tubing
  • Two 120mm Fans (Rainbow lighting)
  • Intel Mounting Bracket Kit (LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X)
  • AMD Mounting Bracket Kit (FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4)
  • Backplate for Intel sockets
  • மவுண்டிங் திருகுகள் மற்றும் ஸ்டாண்ட்ஆஃப்கள்
  • வெப்ப பேஸ்ட்
  • Fan/RGB Controller (if applicable, inferred from image)
  • பயனர் கையேடு (இந்த ஆவணம்)

3. நிறுவல் வழிகாட்டி

This section provides general steps for installing the Aigo AC SE 240 Water Cooler. Refer to your motherboard and PC case manuals for specific instructions regarding component placement and cable management.

3.1 Prepare the CPU and Motherboard

  1. உங்கள் சிஸ்டம் அணைக்கப்பட்டுள்ளதையும், மின்சக்தி மூலத்திலிருந்து துண்டிக்கப்பட்டுள்ளதையும் உறுதிசெய்யவும்.
  2. Remove any existing CPU cooler. Clean the CPU surface thoroughly with isopropyl alcohol to remove old thermal paste.
  3. Identify the correct mounting bracket for your CPU socket (Intel or AMD).

3.2 Install the Radiator and Fans

Aigo AC SE 240 Water Cooler with rainbow fans

படம்: The Aigo AC SE 240 Water Cooler showing the 240mm radiator with two fans attached, displaying their rainbow LED lighting. The pump/CPU block is connected via two braided tubes.

  1. Attach the two 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is correct for your case (typically intake or exhaust).
  2. Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or rear). Use the appropriate screws to secure it.

3.3 Install the CPU Block/Pump

  1. Apply a small amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
  2. Attach the correct mounting standoffs and brackets to your motherboard around the CPU socket. For Intel sockets, you may need to install the backplate first.
  3. Carefully place the CPU block/pump onto the CPU, aligning the mounting holes.
  4. Secure the CPU block/pump with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

3.4 கேபிள்களை இணைக்கவும்

  1. Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. If neither is available, use a SYS_FAN header.
  2. Connect the fan power cables to the CPU_FAN and/or SYS_FAN headers on your motherboard, or to the included fan/RGB controller.
  3. Connect the RGB cables from the fans and pump to the included RGB controller, and then connect the controller to an available RGB header on your motherboard (if applicable) or a SATA power connector.
  4. Organize cables for optimal airflow and aesthetics.

4. இயக்க வழிமுறைகள்

Once installed, the Aigo AC SE 240 Water Cooler operates automatically. The pump and fans will adjust their speeds based on CPU temperature, as controlled by your motherboard's BIOS/UEFI settings or dedicated software.

  • பயாஸ்/யுஇஎஃப்ஐ அமைப்புகள்: Access your motherboard's BIOS/UEFI to configure fan curves and pump speed settings. It is recommended to set the pump to run at 100% speed for optimal cooling performance and to prevent air bubbles from settling.
  • மென்பொருள் கட்டுப்பாடு: If your motherboard supports it, you may use manufacturer-provided software to fine-tune fan speeds, monitor temperatures, and customize RGB lighting effects.
  • ஆரம்ப தொடக்கம்: During the first few minutes of operation, you might hear gurgling sounds as air bubbles are purged from the loop. This is normal and should subside.
மேல் view of Aigo AC SE 240 Water Cooler pump and radiator

படம்: ஒரு மேலிருந்து கீழாக view of the Aigo AC SE 240 Water Cooler, highlighting the CPU block with its illuminated Aigo logo and the two rainbow-lit fans on the radiator.

5. பராமரிப்பு

Regular maintenance ensures optimal performance and longevity of your water cooler.

  • தூசி சுத்தம் செய்தல்: அழுத்தப்பட்ட காற்று அல்லது மென்மையான தூரிகையைப் பயன்படுத்தி ரேடியேட்டர் துடுப்புகள் மற்றும் விசிறி கத்திகளில் உள்ள தூசியை அவ்வப்போது சுத்தம் செய்யுங்கள். அதிகப்படியான தூசி காற்றோட்டத்தைத் தடுத்து குளிரூட்டும் திறனைக் குறைக்கும்.
  • குழாய் ஆய்வு: Visually inspect the tubing and connections for any signs of leaks, kinks, or damage. Address any issues immediately.
  • பம்ப் சத்தம்: If the pump starts making unusual noises, it may indicate air trapped in the loop or a failing pump. Ensure the pump is running at full speed and try gently tilting your PC case to help dislodge air bubbles.

6. சரிசெய்தல்

This section addresses common issues you might encounter with your Aigo AC SE 240 Water Cooler.

பிரச்சனைசாத்தியமான காரணம்தீர்வு
அதிக CPU வெப்பநிலைகள்
  • முறையற்ற வெப்ப பேஸ்ட் பயன்பாடு
  • CPU block not seated correctly
  • Pump not running or running too slow
  • Fans not spinning or spinning too slow
  • ரேடியேட்டர் தூசியால் அடைக்கப்பட்டுள்ளது
  • வெப்ப பேஸ்ட்டை மீண்டும் தடவவும்
  • Reseat CPU block, ensure even pressure
  • Check pump power connection, set pump to 100% in BIOS
  • Check fan connections, configure fan curves in BIOS
  • Clean radiator fins
Fans/RGB not lighting up
  • Loose RGB cable connection
  • RGB controller not powered or faulty
  • தவறான RGB தலைப்பு இணைப்பு
  • Verify all RGB cables are securely connected
  • Ensure RGB controller has SATA power and is connected to motherboard
  • Check motherboard manual for correct RGB header type (e.g., 5V ARGB vs 12V RGB)
அசாதாரண பம்ப் சத்தம்
  • வளையத்தில் காற்று குமிழ்கள்
  • பம்ப் செயலிழப்பு
  • Gently tilt the PC case to help dislodge air bubbles. This may take some time.
  • Ensure pump is running at 100%. If noise persists and cooling is affected, contact support.

7. விவரக்குறிப்புகள்

Detailed technical specifications for the Aigo AC SE 240 Water Cooler.

  • மாதிரி: ACSE240-BK
  • Intel Socket Compatibility: LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X
  • AMD Socket Compatibility: FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4
  • குழாய் நீளம்: 395 மி.மீ
  • பம்ப் வேகம்: 3200 ± 10% RPM
  • பம்ப் தொகுதிtage: 12V
  • ரேடியேட்டர் பரிமாணங்கள்: 274 x 120 x 27 மிமீ
  • விசிறி அளவுகள்: 120 x 120 x 25 மிமீ
  • மின்விசிறி வேகம்: 800 ~ 1800 ஆர்பிஎம்
  • காற்றோட்டம்: 64.05 CFM
  • இரைச்சல் நிலை: 30 dBA ± 10%
  • TDP: 210W
  • குளிரூட்டும் முறை: திரவம் (நீர்)
  • இணக்கமான சாதனங்கள்: டெஸ்க்டாப்

8. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or service inquiries, please refer to the official Aigo webஉங்கள் தளத்தில் அல்லது உங்கள் சில்லறை விற்பனையாளரைத் தொடர்பு கொள்ளவும். உத்தரவாதக் கோரிக்கைகளுக்கு உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.

Official Aigo Webதளம்: www.aigocooler.com (குறிப்பு: இது ஒரு ஒதுக்கிடம். URL. Please verify the actual official website for Aigo products.)

© 2024 Aigo. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.