PARKSIDE PHET 15 C2

PARKSIDE PHET 15 C2 Electric Stapler Instruction Manual

Model: PHET 15 C2

அறிமுகம்

Thank you for choosing the PARKSIDE PHET 15 C2 Electric Stapler. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

பாதுகாப்பு வழிமுறைகள்

மின்சார அதிர்ச்சி, தீ மற்றும் கடுமையான காயம் ஏற்படும் அபாயத்தைக் குறைக்க பின்வரும் பாதுகாப்பு முன்னெச்சரிக்கை நடவடிக்கைகளை எப்போதும் கடைபிடிக்கவும்.

  • வேலை பகுதி பாதுகாப்பு: வேலைப் பகுதியை சுத்தமாகவும், நல்ல வெளிச்சத்துடனும் வைத்திருங்கள். இரைச்சலான அல்லது இருண்ட பகுதிகள் விபத்துக்களை அழைக்கின்றன. எரியக்கூடிய திரவங்கள், வாயுக்கள் அல்லது தூசி போன்ற வெடிக்கும் வளிமண்டலங்களில் மின் கருவிகளை இயக்க வேண்டாம்.
  • மின் பாதுகாப்பு: பவர் டூல் பிளக்குகள் அவுட்லெட்டுடன் பொருந்த வேண்டும். பிளக்கை எந்த வகையிலும் மாற்ற வேண்டாம். வயரை தவறாகப் பயன்படுத்த வேண்டாம். பவர் டூலை எடுத்துச் செல்ல, இழுக்க அல்லது பிளக்கை துண்டிக்க ஒருபோதும் வயரைப் பயன்படுத்த வேண்டாம். வெப்பம், எண்ணெய், கூர்மையான விளிம்புகள் அல்லது நகரும் பாகங்களிலிருந்து வயரை விலக்கி வைக்கவும்.
  • தனிப்பட்ட பாதுகாப்பு: எப்போதும் கண் பாதுகாப்பு அணியுங்கள். நீண்ட நேரம் வேலை செய்யும்போது காது கேட்கும் பாதுகாப்பைப் பயன்படுத்துங்கள். ஒழுங்காக உடை அணியுங்கள்; தளர்வான ஆடைகள் அல்லது நகைகளைத் தவிர்க்கவும். முடி, ஆடை மற்றும் கையுறைகளை நகரும் பகுதிகளிலிருந்து விலக்கி வைக்கவும்.
  • கருவி பயன்பாடு மற்றும் பராமரிப்பு: மின் கருவியை வலுக்கட்டாயமாகப் பயன்படுத்த வேண்டாம். உங்கள் பயன்பாட்டிற்கு ஏற்ற சரியான மின் கருவியைப் பயன்படுத்தவும். ஏதேனும் மாற்றங்களைச் செய்வதற்கு முன், துணைக்கருவிகளை மாற்றுவதற்கு முன் அல்லது மின் கருவிகளைச் சேமிப்பதற்கு முன், மின் மூலத்திலிருந்து பிளக்கைத் துண்டிக்கவும்.
  • Specific Stapler Safety: Always assume the tool contains fasteners. Do not point the tool at yourself or others. Keep hands and body parts away from the discharge area. Ensure the workpiece is stable before fastening.

தயாரிப்பு முடிந்துவிட்டதுview

The PARKSIDE PHET 15 C2 is a lightweight and compact electric stapler designed for quick and comfortable fastening tasks. It features a non-slip soft grip for comfortable one-handed operation.

பக்கம் view of the PARKSIDE PHET 15 C2 Electric Stapler, showing its compact design and ergonomic grip.

படம் 1: பக்கம் view of the PARKSIDE PHET 15 C2 Electric Stapler, highlighting its compact design and ergonomic grip. The power cord is visible at the rear.

PARKSIDE PHET 15 C2 Electric Stapler with included staples and nails on a wooden surface.

Figure 2: The PARKSIDE PHET 15 C2 Electric Stapler displayed with a selection of compatible staples and nails, ready for use.

முக்கிய கூறுகள்:

  • தூண்டுதல்: Activates the stapling mechanism.
  • பத்திரிகை: Holds staples or nails. Features a level indicator.
  • Nose/Discharge Area: Where fasteners exit the tool.
  • மென்மையான கிரிப் கைப்பிடி: Provides comfort and control during operation.
  • மின் கம்பி: கருவியை ஒரு மின் நிலையத்துடன் இணைக்கிறது.

அமைவு

1. ஏற்றுதல் ஃபாஸ்டென்சர்கள்

Ensure the tool is unplugged from the power source before loading fasteners.

  1. Locate the magazine release mechanism, typically at the bottom or rear of the tool.
  2. Slide open the magazine.
  3. Insert the appropriate staples (6-14 mm) or nails (14-15 mm) into the magazine. Ensure they are oriented correctly, with the points facing forward.
  4. Close the magazine securely until it clicks into place. The level indicator on both sides of the magazine will show the remaining fastener quantity.
பின்புறம் view of the PARKSIDE PHET 15 C2 Electric Stapler showing the open magazine for loading fasteners.

படம் 3: பின்புறம் view of the stapler with the magazine open, illustrating how to load staples or nails. The red tab indicates the magazine release.

2. இணைக்கும் சக்தி

Once fasteners are loaded, plug the power cord into a suitable electrical outlet (230V AC, 50Hz).

இயக்க வழிமுறைகள்

The PARKSIDE PHET 15 C2 is designed for comfortable one-handed operation with its soft grip.

  1. பணிப்பொருளைத் தயாரிக்கவும்: Ensure the material you are fastening is clean, dry, and free from obstructions.
  2. நிலை கருவி: Place the nose of the stapler firmly against the workpiece at the desired fastening point. Ensure the tool is held perpendicular to the surface for optimal penetration.
  3. செயல்படுத்து: Press the trigger to drive a fastener into the material. Release the trigger to stop.
  4. பொருத்துதலைச் சரிபார்க்கவும்: Inspect the driven fastener to ensure it is properly seated. Adjust pressure or position if necessary for subsequent fastenings.
A person using the PARKSIDE PHET 15 C2 Electric Stapler to fasten fabric to a wooden frame, demonstrating one-handed operation.

Figure 4: The electric stapler in action, securing fabric to a canvas frame. This illustrates the tool's ease of use for upholstery and crafting projects.

A person using the PARKSIDE PHET 15 C2 Electric Stapler to fasten a board to a wooden structure.

Figure 5: The stapler being used to attach a board, showcasing its application in general DIY and construction tasks.

பயன்பாடுகள்:

This electric stapler is suitable for various tasks including:

  • Decoration projects
  • DIY crafts
  • லைட் அப்ஹோல்ஸ்டரி
  • Home repairs and fastening tasks
Close-up of fabric neatly stapled to the underside of a wooden chair seat.

Figure 6: Detail of fabric securely fastened to a wooden chair frame using staples, demonstrating a typical upholstery application.

பராமரிப்பு

Regular maintenance ensures the longevity and safe operation of your electric stapler.

  • சுத்தம்: Disconnect the tool from the power supply. Use a dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners. Periodically clear any dust or debris from the magazine and discharge area.
  • சேமிப்பு: Store the tool in a dry, secure location out of reach of children. Ensure the power cord is neatly coiled and not kinked.
  • ஆய்வு: Before each use, inspect the power cord for damage. Check the tool for any loose parts or signs of wear. Do not use a damaged tool.

சரிசெய்தல்

பொதுவான பிரச்சினைகள் மற்றும் அவற்றின் தீர்வுகளுக்கு பின்வரும் அட்டவணையைப் பார்க்கவும்.

பிரச்சனைசாத்தியமான காரணம்தீர்வு
கருவி இயங்காது.மின்சாரம் இல்லை.பவர் கார்டு வேலை செய்யும் அவுட்லெட்டில் பாதுகாப்பாக இணைக்கப்பட்டுள்ளதா எனச் சரிபார்க்கவும்.
Fasteners do not drive properly.Incorrect fastener size or type.
பத்திரிகை காலியாக உள்ளது.
Tool not pressed firmly against workpiece.
Ensure correct staples/nails (6-14mm staples, 14-15mm nails) are used.
பத்திரிகையை மீண்டும் ஏற்றவும்.
Apply firm, even pressure to the tool.
ஃபாஸ்டனர் ஜாம்.Debris in magazine or discharge area.
வளைந்த ஃபாஸ்டென்சர்கள்.
கருவியை துண்டிக்கவும். Open the magazine and carefully remove any jammed fasteners or debris. Use only undamaged fasteners.

இந்த தீர்வுகளை முயற்சித்த பிறகும் சிக்கல்கள் தொடர்ந்தால், வாடிக்கையாளர் ஆதரவைத் தொடர்பு கொள்ளவும்.

விவரக்குறிப்புகள்

  • மாதிரி: PHET 15 C2 பற்றி
  • சக்தி: 70 டபிள்யூ
  • உள்ளீடு தொகுதிtage: 230 வி ஏசி, 50 ஹெர்ட்ஸ்
  • இணக்கமான ஸ்டேபிள்ஸ்: Type 53, 6-14 mm
  • Compatible Nails: Type 47, 14-15 mm
  • செயல்பாட்டு முறை: தானியங்கி
  • அம்சங்கள்: Lightweight, compact, soft grip, double-sided level indicator.
  • சேர்க்கப்பட்ட பாகங்கள்: 400 x 10 mm staples, 100 x 14 mm nails.

உத்தரவாதம் மற்றும் ஆதரவு

உத்தரவாதத் தகவல் அல்லது தொழில்நுட்ப ஆதரவுக்கு, உங்கள் கொள்முதலுடன் வழங்கப்பட்ட ஆவணங்களைப் பார்க்கவும் அல்லது உற்பத்தியாளரை நேரடியாகத் தொடர்பு கொள்ளவும். எந்தவொரு உத்தரவாதக் கோரிக்கைகளுக்கும் உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.

© 2023 PARKSIDE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.