ROCKBROS 50210041001/US

ROCKBROS 11-inch Wider Bike Trainer Sweat Guard Instruction Manual

Model: 50210041001/US

1. அறிமுகம்

The ROCKBROS Bike Trainer Sweat Guard is designed to protect your bicycle frame and components from sweat corrosion during indoor cycling training. This manual provides essential information on how to properly set up, use, and maintain your sweat guard to ensure its longevity and effectiveness.

2. தயாரிப்பு அம்சங்கள்

  • Super Sweat Absorption: Features a dual-layer design to effectively prevent sweat from reaching and corroding your bike frame.
  • சரிசெய்யக்கூடிய வடிவமைப்பு: Equipped with elastic and hook-and-loop fastener straps for a secure and adaptable fit on various bike frames. The elastic extends up to 11.81 inches.
  • தரமான பொருள்: Constructed from high-quality polyester, mesh, waterproof denim, and neoprene fabrics, ensuring durability and repeated use.
  • பரந்த பாதுகாப்பு: The 11-inch wider design minimizes knee bumping during stand-ups or intervals, providing comprehensive sweat protection for comfortable training.
ROCKBROS Bike Trainer Sweat Guard, front and back view பரிமாணங்களுடன்

படம் 1: முன் மற்றும் பின் view of the ROCKBROS Bike Trainer Sweat Guard, illustrating its 11-inch width and 17.32-inch length, with an adjustable strap ranging from 9.84 to 21.65 inches.

3. அமைவு வழிமுறைகள்

Follow these steps to properly install the sweat guard on your bicycle:

  1. நிலைப்படுத்தல்: Place the wider end of the sweat guard over your bicycle's handlebars, ensuring the ROCKBROS logo faces upwards and the mesh section is centered over the top tube.
  2. கைப்பிடி இணைப்பு: Secure the two upper straps around your handlebars using the hook-and-loop fasteners. Ensure a snug fit to prevent slippage.
  3. Seatpost Attachment: Extend the elastic strap from the narrower end of the sweat guard and loop it around your bicycle's seatpost. Adjust the buckle to achieve a firm attachment.
  4. அனுமதியை சரிபார்க்கவும்: Verify that the sweat guard does not interfere with your pedal stroke or any moving parts of the bicycle. The design aims to provide good clearance for pedaling.
Cyclist using the ROCKBROS Bike Trainer Sweat Guard during indoor training

Figure 2: A cyclist demonstrating the proper installation and use of the sweat guard during an indoor training session, protecting the bike frame.

4. இயக்க வழிகாட்டுதல்கள்

Once installed, the ROCKBROS Bike Trainer Sweat Guard functions automatically to protect your bike. Its primary role is to absorb and deflect sweat, preventing it from dripping onto sensitive bike components.

  • The mesh and absorbent fabric layers work together to wick away moisture.
  • The wider design ensures that sweat from your upper body, especially during intense efforts or standing climbs, is caught by the guard.
Close-up of the ROCKBROS Bike Trainer Sweat Guard's mesh and fabric materials

படம் 3: விரிவானது view of the sweat guard's construction, highlighting the super sweat absorption mesh and durable fabric.

5. பராமரிப்பு மற்றும் பராமரிப்பு

Regular cleaning of your sweat guard is crucial to maintain hygiene and extend its lifespan.

  • The sweat guard is washable and designed for repeated use.
  • சலவை வழிமுறைகள்: Hand wash in warm water below 40°C (104°F). Do not wring out aggressively to prevent warping.
  • உலர்த்துதல்: Air dry completely before re-installing or storing.
ROCKBROS Bike Trainer Sweat Guard being folded, demonstrating its flexibility and non-deforming material

Figure 4: The sweat guard's material is designed to be flexible and resistant to deformation even after washing, as shown by its ability to be folded without damage.

6. சரிசெய்தல்

  • Sweat Guard Feels Too Short: If you ride a large-sized bike frame, the overall length of the sweat guard might be tight. Ensure the elastic strap is fully extended and securely looped around the seatpost.
  • Insufficient Handlebar Attachment: If the hook-and-loop fastener straps on the handlebars do not provide enough grip, try looping the strap through itself or around a different part of the handlebar for a more secure fit.
  • Sweat Beading on Front Section: The upper gray fabric portion of the sweat guard is less absorbent than the mesh. If you sweat heavily and lean forward, sweat may bead on this section. Consider using a towel in conjunction with the sweat guard for additional protection in this area.

7. விவரக்குறிப்புகள்

பொருள் தொகுப்பு பரிமாணங்கள் L x W x H9.13 x 6.3 x 1.89 அங்குலம்
தொகுப்பு எடை0.08 கிலோகிராம்
பிராண்ட் பெயர்ராக்ப்ரோஸ்
பிறப்பிடமான நாடுசீனா
நிறம்கருப்பு
பொருள்Polyester, Mesh, Waterproof Denim, Neoprene
பரிந்துரைக்கப்பட்ட பயனர்கள்யுனிசெக்ஸ்
உற்பத்தியாளர்ராக்ப்ரோஸ்
பகுதி எண்50210041001/US
அளவுஒரு அளவு
விளையாட்டு வகைசைக்கிள் ஓட்டுதல்
முதல் தேதி கிடைக்கும்அக்டோபர் 3, 2023

8. உத்தரவாதம் மற்றும் ஆதரவு

The ROCKBROS Bike Trainer Sweat Guard comes with a 1 வருட உத்தரவாதம் வாங்கிய தேதியிலிருந்து. இந்த உத்தரவாதமானது சாதாரண பயன்பாட்டின் கீழ் உற்பத்தி குறைபாடுகளை உள்ளடக்கும்.

For warranty claims, technical support, or any product-related inquiries, please contact ROCKBROS customer service through their official website or the retailer where the product was purchased. Please have your model number (50210041001/US) and proof of purchase ready when contacting support.

© 2023 ROCKBROS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.