1. அறிமுகம்

Thank you for choosing the ProMaster Ultrasoft US1014RGB 2-Light Transport Kit. This kit provides two versatile LED light panels designed for photographers and videographers seeking soft, high-quality illumination. The lights feature RGBWW capabilities, variable color temperature, and special effects, all controllable via an intuitive mobile application. This manual provides essential information for the safe and effective operation of your new lighting kit.

Image 1.1: The ProMaster Ultrasoft US1014RGB 2-Light Transport Kit, showing both LED panels on their respective stands.

2. பாதுகாப்பு தகவல்

• Do not expose the lights to water or excessive humidity.
• LED ஒளி மூலத்திற்கு நேரடி கண் வெளிப்பாட்டைத் தவிர்க்கவும்.
• அதிக வெப்பத்தைத் தடுக்க சரியான காற்றோட்டத்தை உறுதிப்படுத்தவும்.
• Use only the specified power adapters or compatible NP-F batteries and D-Tap power sources.
• குழந்தைகளுக்கு எட்டாத இடத்தில் வைக்கவும்.
• Always secure the light panels firmly to the stands to prevent accidental falls.
• சுத்தம் செய்வதற்கு அல்லது பராமரிப்பதற்கு முன் மின்சாரத்தைத் துண்டிக்கவும்.

3. தொகுப்பு உள்ளடக்கங்கள்

உங்கள் தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

• 2 x ProMaster Ultrasoft US1014RGB LED Light Panels
• 2 x LS-CT Light Stands
• 2 x ஏசி பவர் அடாப்டர்கள்
• 1 x Transport Case

4. தயாரிப்பு முடிந்துவிட்டதுview

4.1 LED லைட் பேனல்

படம் 4.1: முன் view of the LED light panel with barn doors.

The Ultrasoft LED panel features an integrated diffuser for soft light output. The attached barn doors allow for light shaping and spill control.

4.2 கண்ட்ரோல் பேனல்

Image 4.2: Rear control panel of the LED light.

The rear panel includes a display, mode selection buttons (MODE, TEMP, BRT, SAT, HUE, EFX), a control dial, a power switch, and dual NP-F battery mounts. A DC-IN port is also present for AC power or D-Tap input.

4.3 Light Stand

Image 4.3: ProMaster LS-CT Light Stand.

The included LS-CT light stands are compact and provide stable support for the LED panels.

5 அமைவு

5.1 Assembling the Light Stand

1. Remove the LS-CT light stand from the transport case.
2. Extend the legs of the stand until they are fully spread and stable.
3. Loosen the locking collars on the stand sections and extend the center column to the desired height. Securely tighten all locking collars.

5.2 லைட் பேனலை ஏற்றுதல்

1. Locate the mounting receiver on the bottom of the LED light panel.
2. Place the light panel onto the stud at the top of the light stand.
3. Tighten the locking knob on the light panel's yoke to secure it to the stand. Adjust the tilt angle as needed and tighten the tilt locking knob.

5.3 Powering the Lights

The US1014RGB light panel offers three power options:

• ஏசி பவர்: Connect the included AC power adapter to the DC-IN port on the light panel and plug it into a wall outlet.
• NP-F Batteries: Insert two compatible NP-F type batteries (sold separately) into the battery mounts on the rear of the panel. Ensure correct polarity.
• D-Tap: Use a D-Tap cable (sold separately) to connect to a compatible D-Tap power source via the DC-IN port.

6. இயங்குகிறது

6.1 பவர் ஆன்/ஆஃப்

Flip the power switch located on the rear control panel to the 'ON' position to power on the light. Flip it to 'OFF' to power off.

6.2 கைமுறை கட்டுப்பாடு

Use the buttons and control dial on the rear panel to adjust settings:

• பெறுக: Press to cycle through different operating modes (CCT, RGB, EFX).
• CCT பயன்முறை: Use the 'TEMP' button and control dial to adjust color temperature from 2,500K to 8,500K. Use the 'BRT' button and control dial to adjust brightness.
• RGB பயன்முறை: Use the 'HUE', 'SAT', and 'BRT' buttons with the control dial to adjust hue (360 colors), saturation, and brightness.
• EFX Mode: Use the 'EFX' button and control dial to select from 19 special effects scenes. Use the 'BRT' button to adjust brightness of the effect.

6.3 Wireless Control with Light Attendant App

Image 6.1: ProMaster Light Attendant App Interface.

The ProMaster Ultrasoft US1014RGB can be controlled wirelessly using the free Light Attendant app, available for iOS and Android devices.

1. Download and install the 'Light Attendant' app from your device's app store.
2. Ensure your light panel is powered on.
3. Open the app and follow the on-screen instructions to connect to your light panel(s). The app allows for comprehensive control over all light settings, including CCT, RGB, and special effects.

7. பராமரிப்பு

7.1 சுத்தம் செய்தல்

To clean the light panel and stand, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Do not use harsh chemicals or abrasive cleaners.

7.2 சேமிப்பு

When not in use, store the light kit in its transport case in a cool, dry place, away from direct sunlight and extreme temperatures.

8. சரிசெய்தல்

9. விவரக்குறிப்புகள்

• மாதிரி: US1014RGB
• ஒளி மூல வகை: LED
• வண்ண வெப்பநிலை: 2,500K - 8,500K
• வண்ண விளக்கக்காட்சி: TLCI 98+ / CRI 96+
• RGB பயன்முறை: 360 colors with saturation control
• சிறப்பு விளைவுகள்: 19 காட்சிகள்
• ஆற்றல் விருப்பங்கள்: AC, NP-F batteries, D-Tap
• வயர்லெஸ் கட்டுப்பாடு: Light Attendant app (iOS/Android)
• பொருள்: Plastic, Polypropylene
• Item Weight (per light): Approximately 10 pounds (including stand)
• தொகுப்பு அளவுகள்: 24.09 x 16.93 x 13.27 அங்குலம்

10. உத்தரவாதம் மற்றும் ஆதரவு

ProMaster products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official ProMaster website or contact your authorized ProMaster dealer. Keep your proof of purchase for warranty claims.

மேலும் உதவிக்கு, இங்கு செல்க: www.promaster.com