DIGITUS DS-55328 Wireless HDMI KVM Extender/Splitter User Manual

1. அறிமுகம்

The DIGITUS DS-55328 Wireless HDMI KVM Extender Kit is designed to transmit HDMI video and audio signals wirelessly. This kit supports UHD 4K/30Hz resolution over distances up to 150 meters in an unobstructed environment. It consists of a sending unit (Transmitter) and a receiving unit (Receiver).

Key features include KVM functionality, allowing control of the signal source from the receiver unit using a connected mouse and keyboard. An HDMI Loop-Out port on the sending unit enables a local monitor connection for monitoring the output. The system supports point-to-multipoint connections, allowing one transmitter to connect with up to four receivers (additional receivers, model DS-55329, are sold separately).

• Wireless transmission of HDMI signals up to 150 meters (with free view).
• Point-to-multipoint connection: 1 sender (source) + up to 4 receivers (output devices).
• Supports wireless transmission of AV signals with resolutions up to 4K UHD (2160p/30Hz).
• HDMI 2.0 மற்றும் HDCP 2.2 இணக்கமானது.
• KVM functionality for mouse/keyboard control at the receiver.
• HDMI Loop-Out on the transmitter for local monitoring.
• Easy plug & play operation, no drivers or software required.
• Touch Screen Back Control compatible via USB connection on receiver.
• Power via USB-C connection and included power supply.
• 128-bit AES encoding and WPA2 protocol for secure transmission.

2. தொகுப்பு உள்ளடக்கங்கள்

கீழே பட்டியலிடப்பட்டுள்ள அனைத்து பொருட்களும் உங்கள் தொகுப்பில் சேர்க்கப்பட்டுள்ளதா என்பதைச் சரிபார்க்கவும். ஏதேனும் பொருட்கள் காணவில்லை அல்லது சேதமடைந்திருந்தால், உங்கள் சில்லறை விற்பனையாளரைத் தொடர்பு கொள்ளவும்.

• 1x DIGITUS DS-55328 Transmitter Unit
• 1x DIGITUS DS-55328 Receiver Unit
• 2x Power Adapters (USB-C)
• 2x HDMI கேபிள்கள்
• 2x USB-C Power Cables
• 1x IR Link Cable
• பயனர் கையேடு (இந்த ஆவணம்)

படம் 2.1: Contents of the DS-55328 package, including the transmitter, receiver, power adapters, HDMI cables, USB-C cables, and an IR link cable.

3. தயாரிப்பு முடிந்துவிட்டதுview

Familiarize yourself with the ports and indicators on both the Transmitter and Receiver units.

3.1. டிரான்ஸ்மிட்டர் யூனிட் (TX)

• HDMI இல்: Connects to your HDMI source device (e.g., PC, laptop, media player).
• HDMI OUT (Loop-Out): Connects to a local monitor for direct display of the source signal.
• யூ.எஸ்.பி-சி: பவர் உள்ளீடு போர்ட்.
• IR Link: Connects to the IR blaster cable for controlling the source device.
• பொத்தான்: For pairing or mode selection.
• மின்விசை மாற்றும் குமிழ்: யூனிட்டை ஆன் அல்லது ஆஃப் செய்ய.

3.2. ரிசீவர் யூனிட் (RX)

• HDMI வெளியே: Connects to your display device (e.g., TV, monitor, projector).
• USB போர்ட்கள்: Connects to a keyboard, mouse, or touch screen panel for KVM functionality.
• யூ.எஸ்.பி-சி: பவர் உள்ளீடு போர்ட்.
• நிலை காட்சி: Indicates connection status and other operational information.
• பொத்தான்: For pairing or mode selection.
• மின்விசை மாற்றும் குமிழ்: யூனிட்டை ஆன் அல்லது ஆஃப் செய்ய.

படம் 3.1: Detailed diagram showing the various ports and features on both the Transmitter and Receiver units of the DS-55328.

படம் 3.2: முன் view of the DS-55328 Transmitter and Receiver units, highlighting their compact design.

படம் 3.3: பின்புறம் view of the DS-55328 Transmitter and Receiver units, showing all input and output ports.

4. அமைவு வழிமுறைகள்

Follow these steps to set up your Wireless HDMI KVM Extender Kit.

4.1. பாயிண்ட்-டு-பாயிண்ட் இணைப்பு

1. Connect Source to Transmitter: Use an HDMI cable to connect your source device (e.g., PC, laptop) to the HDMI-IN port on the DS-55328 Transmitter unit.
2. Connect Local Monitor (Optional): If you wish to monitor the source locally, connect an HDMI cable from the HDMI OUT (Loop-Out) port on the Transmitter to your local monitor.
3. டிரான்ஸ்மிட்டரை இயக்கவும்: Connect one of the provided USB-C power cables to the USB-C port on the Transmitter, and then plug the power adapter into an electrical outlet.
4. Connect Receiver to Display: Use an HDMI cable to connect your display device (e.g., TV, monitor) to the HDMI அவுட் port on the DS-55328 Receiver unit.
5. Connect KVM Peripherals (Optional): For KVM functionality, connect your USB keyboard and mouse to the USB போர்ட்கள் ரிசீவர் யூனிட்டில்.
6. பெறுநருக்கு சக்தி கொடுங்கள்: Connect the second USB-C power cable to the USB-C port on the Receiver, and then plug the power adapter into an electrical outlet.
7. பவர் ஆன்: Turn on both the Transmitter and Receiver units using their respective power switches. Ensure your source device and display are also powered on.
8. இணைத்தல் (தேவைப்பட்டால்): The units should automatically pair. If not, refer to the operating instructions for manual pairing.

படம் 4.1: Diagram illustrating a typical point-to-point connection setup for the DS-55328, showing connections from a source to the transmitter and from the receiver to a display with KVM peripherals.

4.2. பாயிண்ட்-டு-மல்டிபாயிண்ட் இணைப்பு

The DS-55328 supports connecting one Transmitter to up to four Receiver units (DS-55329, sold separately).

1. Follow steps 1-3 from the Point-to-Point Connection for setting up the Transmitter unit.
2. For each additional Receiver unit (DS-55329), follow steps 4-6 from the Point-to-Point Connection.
3. Ensure all Transmitter and Receiver units are powered on. The Transmitter will broadcast the signal to all paired Receivers.

படம் 4.2: Diagram showing a point-to-multipoint connection setup, where one DS-55328 Transmitter sends signals to multiple DS-55329 Receiver units.

5. இயக்க வழிமுறைகள்

5.1. பவர் ஆன்/ஆஃப்

Use the power switch on each unit to turn it on or off. Ensure both Transmitter and Receiver units are powered on for operation.

5.2. KVM செயல்பாடு

Once a USB keyboard and mouse are connected to the Receiver's USB ports, you can control the source device connected to the Transmitter. This allows for remote operation of your computer or other KVM-compatible source.

5.3. ஐஆர் கட்டுப்பாடு

Connect the IR Link cable to the IR port on the Transmitter. Position the IR blaster head near the IR receiver of your source device. This enables you to use the source device's remote control from the location of the Receiver unit.

5.4. நிலை குறிகாட்டிகள்

The Status Display on the Receiver unit provides visual feedback on the connection status. Refer to the device's LED indicators for specific states (e.g., power, signal, connection status).

5.5. இணைத்தல்

In most cases, the Transmitter and Receiver units will automatically pair upon power-up. If pairing does not occur, press the 'Button' on both the Transmitter and Receiver units simultaneously for a few seconds until the status indicators confirm a successful connection.

6. பராமரிப்பு

To ensure optimal performance and longevity of your DIGITUS DS-55328, follow these maintenance guidelines:

• சுத்தம்: Use a soft, dry cloth to clean the units. Do not use liquid or aerosol cleaners, as they may damage the casing அல்லது உள் கூறுகள்.
• சுற்றுச்சூழல்: Operate the device in a well-ventilated area. Avoid exposing the units to extreme temperatures, high humidity, or direct sunlight.
• சேமிப்பு: When not in use for extended periods, store the units in a cool, dry place, away from dust and moisture.
• கேபிள்கள்: Ensure all cables are connected securely and are not bent or crimped, which could lead to signal loss or damage.

7. சரிசெய்தல்

If you encounter issues with your DS-55328, refer to the following troubleshooting steps:

8. விவரக்குறிப்புகள்

9. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, please refer to the documentation provided with your purchase or visit the official DIGITUS website. Technical support may be available through your retailer or the manufacturer's support channels.

உத்திரவாதக் கோரிக்கைகளுக்காக உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்துக் கொள்ளவும்.