1. முக்கியமான பாதுகாப்பு தகவல்
Please read and understand all safety instructions before installing or operating the darkFlash DNA240A AIO CPU Liquid Cooler. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- மின் பாதுகாப்பு: Ensure your power supply is disconnected from the wall outlet before beginning installation. Only connect the cooler to compatible power sources as specified.
- கையாளுதல்: Handle the cooler and its components with care. Avoid bending or kinking the liquid tubes. Do not apply excessive force to the radiator fins or pump head.
- Liquid Coolant: The cooler contains a sealed liquid coolant. Do not attempt to open or modify the sealed unit. In case of a leak, immediately disconnect power and contact support.
- நிலையான மின்சாரம்: Always ground yourself before handling internal PC components to prevent electrostatic discharge (ESD) damage.
- காற்றோட்டம்: Ensure adequate airflow within your PC case to facilitate proper heat dissipation from the radiator.
- இணக்கத்தன்மை: Verify compatibility with your CPU socket (Intel LGA 1200/115X/1700/1851, AMD AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2) and PC case dimensions before installation.
2. தொகுப்பு உள்ளடக்கங்கள்
Carefully unpack the darkFlash DNA240A AIO CPU Liquid Cooler and verify that all components are present and undamaged. If any items are missing or damaged, please contact darkFlash customer support.
- darkFlash DNA240A AIO Liquid Cooler (Radiator, Pump, and Tubes pre-assembled)
- 2 x 120மிமீ PWM ARGB மின்விசிறிகள்
- Intel Mounting Bracket Kit (LGA 1200/115X/1700/1851)
- AMD Mounting Bracket Kit (AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2)
- மின்விசிறி திருகுகள்
- ரேடியேட்டர் மவுண்டிங் திருகுகள்
- வெப்ப பேஸ்ட் (முன்பே பயன்படுத்தப்பட்டது அல்லது ஒரு குழாயில்)
- பயனர் கையேடு (இந்த ஆவணம்)
Image: The darkFlash DNA240A AIO CPU Liquid Cooler, showcasing the radiator, two ARGB fans, and the pump head with its integrated tubing.
3. அமைவு மற்றும் நிறுவல்
This section provides general guidelines for installing your darkFlash DNA240A AIO CPU Liquid Cooler. Specific steps may vary slightly depending on your motherboard and PC case. Refer to your motherboard and case manuals for detailed instructions.
3.1 உங்கள் அமைப்பைத் தயார்படுத்துங்கள்
- பவர் ஆஃப்: Shut down your computer completely and disconnect the power cable from the wall outlet.
- திறந்த வழக்கு: மதர்போர்டு மற்றும் CPU பகுதியை அணுக உங்கள் பிசி கேஸைத் திறக்கவும்.
- பழைய கூலரை அகற்று: If an existing CPU cooler is installed, carefully remove it and clean any old thermal paste from the CPU surface using isopropyl alcohol.
3.2 மவுண்டிங் பிராக்கெட்டை நிறுவவும்
Select the appropriate mounting bracket for your CPU socket (Intel or AMD).
Image: Separate mounting brackets for Intel and AMD CPU sockets, ensuring broad compatibility.
- For Intel Sockets (LGA 1200/115X/1700/1851): Attach the Intel backplate to the rear of your motherboard, aligning the holes. Secure the standoffs through the motherboard from the front.
- For AMD Sockets (AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2): Use the existing AMD backplate (if present) or install the provided AMD backplate. Secure the AMD mounting clips to the pump head, then attach the pump to the CPU socket retention module.
3.3 மவுண்ட் ரேடியேட்டர் மற்றும் ஃபேன்கள்
- ரேடியேட்டரில் மின்விசிறிகளை இணைக்கவும்: Secure the two 120mm PWM ARGB fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case's ventilation (typically exhausting air out of the case).
- மவுண்ட் ரேடியேட்டர்: Install the radiator assembly into your PC case. Common mounting locations include the top, front, or rear of the case, depending on available space and radiator size (240mm). Use the longer radiator mounting screws to secure it.
Image: Diagram illustrating the dimensions of the 240mm and 360mm radiators, important for case compatibility.
3.4 Install Pump Head
- வெப்ப பேஸ்ட்டைப் பயன்படுத்துங்கள்: If the thermal paste is not pre-applied to the cold plate, apply a small pea-sized amount to the center of your CPU's integrated heat spreader (IHS).
- நிலை பம்ப்: Carefully place the pump head onto the CPU, aligning it with the mounting standoffs or clips.
- பாதுகாப்பான பம்ப்: Tighten the retention screws in a diagonal pattern until the pump head is firmly seated. Do not overtighten.
படம்: வெடித்தது view of the pump's internal structure, highlighting the optimized flow rate design for efficient cooling.
3.5 கேபிள்களை இணைக்கவும்
The darkFlash DNA240A features an embedded single-line design for simplified connections.
Image: Illustration of the simplified cable management, featuring a pre-connected 7-pin cable ready for 4-pin (PWM) and 5V 3-pin (ARGB) connections.
- பம்ப் பவர்: Connect the pump's 3-pin or 4-pin connector to the CPU_FAN or AIO_PUMP header on your motherboard.
- Fan Power (PWM): Connect the fan's 4-pin PWM connector to an available fan header on your motherboard (e.g., SYS_FAN or CPU_OPT).
- ARGB லைட்டிங்: Connect the 5V 3-pin ARGB connector to a compatible 5V addressable RGB header on your motherboard. (Note: Do NOT connect to a 12V RGB header, as this will damage the LEDs.)
- கேபிள் மேலாண்மை: Route cables neatly to ensure proper airflow and a clean build.
Image: The darkFlash AIO cooler installed in a PC, demonstrating the vibrant RGB animations from both the fans and the pump head, compatible with ASUS Aura Sync and other motherboard RGB software.
4. இயக்க வழிமுறைகள்
Once installed, the darkFlash DNA240A AIO CPU Liquid Cooler operates automatically to maintain optimal CPU temperatures.
- தானியங்கி மின்விசிறி கட்டுப்பாடு (PWM): The PWM (Pulse Width Modulation) fans automatically adjust their speed based on the CPU temperature, providing an optimal balance between cooling performance and noise levels. This is managed by your motherboard's fan control settings, which can often be configured in the BIOS/UEFI or through motherboard software.
- ARGB லைட்டிங் ஒத்திசைவு: The ARGB fans and pump head feature customizable lighting effects. These can be synchronized with most addressable RGB motherboards, including those supporting Aura Sync, Mystic Light, and Polychrome Sync. Use your motherboard's RGB software to control lighting modes, colors, and brightness.
- உயர் செயல்திறன் கொண்ட பம்ப்: The advanced pump operates at up to 4,000 RPM, ensuring efficient and quiet circulation of the coolant for superior heat dissipation.
Image: Visual representation of the optimized PWM ARGB fans, highlighting their performance metrics such as fan speed (up to 2200 RPM), air capacity (up to 61.7 CFM), fan pressure (up to 1.26 MMH2O), and low noise level (up to 30 dBA).
5. பராமரிப்பு
Regular maintenance helps ensure the longevity and optimal performance of your darkFlash DNA240A AIO CPU Liquid Cooler.
- தூசி அகற்றுதல்: ரேடியேட்டர் துடுப்புகள் மற்றும் விசிறி கத்திகளில் இருந்து அவ்வப்போது தூசியை அழுத்தப்பட்ட காற்று அல்லது மென்மையான தூரிகையைப் பயன்படுத்தி சுத்தம் செய்யுங்கள். தூசி குவிவது காற்றோட்டத்தைத் தடுத்து குளிரூட்டும் திறனைக் குறைக்கும்.
- குழாய் அமைப்பை ஆய்வு செய்யுங்கள்: Visually inspect the liquid tubes for any signs of kinks, cracks, or leaks. While the high polymer rubber hose is designed for durability, regular checks are recommended.
- இணைப்புகளைச் சரிபார்க்கவும்: Ensure all power and ARGB cables remain securely connected to the motherboard and components.
- கூலண்ட் ரீஃபில் இல்லை: The AIO cooler is a sealed unit and does not require coolant refills or maintenance. Do not attempt to open the unit.
6. சரிசெய்தல்
If you encounter issues with your darkFlash DNA240A AIO CPU Liquid Cooler, refer to the following common problems and solutions.
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| அதிக CPU வெப்பநிலைகள் |
|
|
| மின்விசிறிகள் சுழலவில்லை / RGB இல்லை |
|
|
| பம்ப்/விசிறிகளிலிருந்து வழக்கத்திற்கு மாறான சத்தம் |
|
|
7. விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| மாதிரி எண் | DN360A (Note: This model is the 240mm variant, despite the model number DN360A) |
| ரேடியேட்டர் பொருள் | அலுமினியம் |
| குளிர் தட்டு பொருள் | காப்பர், மைக்ரோ ஸ்கைவ் ஃபின்ஸ் |
| குளிரூட்டும் முறை | நீர் குளிர்ச்சி |
| மின்விசிறி வகை | PWM ARGB Fans |
| மின்விசிறி வேகம் | Up to 1800 RPM ±10% (as per feature bullets, 2200 RPM in image) |
| காற்று ஓட்டம் திறன் | நிமிடத்திற்கு 61.7 கன அடி (CFM) |
| இரைச்சல் நிலை | ≤30 dBA |
| பம்ப் வேகம் | 4000 RPM ±10% |
| பவர் இணைப்பான் வகை | 5-Pin (for integrated cable) |
| தொகுதிtage | 12 வோல்ட் |
| வாட்tage | 1.8 வாட்ஸ் |
| இணக்கமான CPU சாக்கெட்டுகள் | Intel: LGA 1200/115X/1700/1851 AMD: AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2 |
| தொகுப்பு பரிமாணங்கள் | 15.12 x 8.94 x 5.51 அங்குலம் |
| பொருளின் எடை | 3.42 பவுண்டுகள் |
8. உத்தரவாதம் மற்றும் ஆதரவு
darkFlash stands behind the quality of its products.
- உத்தரவாதம்: The darkFlash DNA240A AIO CPU Liquid Cooler comes with an exceptional 3-year assurance. Please retain your proof of purchase for warranty claims.
- வாடிக்கையாளர் ஆதரவு: For technical assistance, troubleshooting, or warranty inquiries, please visit the official darkFlash webதளம் அல்லது அவர்களின் வாடிக்கையாளர் ஆதரவுக் குழுவைத் தொடர்புகொள்ளவும்.
- ஆன்லைன் ஆதாரங்கள்: கூடுதல் தகவல்களும் அடிக்கடி கேட்கப்படும் கேள்விகளும் இங்கே கிடைக்கலாம் darkFlash Store on Amazon.