Tunze Turbelle NanoStream 6040.005 HUB Edition Instruction Manual

1. அறிமுகம்

This manual provides detailed instructions for the installation, operation, and maintenance of your Tunze Turbelle NanoStream 6040.005 HUB Edition. This high-performance stream pump is designed for aquariums ranging from 20 to 500 liters (5.3 to 132 USgal.), offering adjustable flow rates and smart control capabilities.

The Turbelle NanoStream 6040.005 HUB Edition is equipped with a WIFI/Cloud-based controller (Turbelle Controller 7020) for precise flow management and features a compact design for easy integration into your aquarium.

2. பாதுகாப்பு வழிமுறைகள்

• Always disconnect the power supply before performing any maintenance or installation work on the pump.
• Ensure the power supply unit is placed in a dry area, away from water splashes.
• Do not operate the pump if the power cord or any part of the unit is damaged.
• This device is intended for indoor use only and for aquariums.
• குழந்தைகளுக்கு எட்டாத இடத்தில் வைக்கவும்.
• The pump must be fully submerged during operation.

3. தொகுப்பு உள்ளடக்கங்கள்

தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

• Tunze Turbelle NanoStream 6040.005 Pump
• Turbelle Controller 7020 (WIFI/Cloud-based)
• Power Supply Unit (100-240V / 50-60Hz)
• Magnet Holder (for glass thickness up to 12 mm / 1/2”)
• ஃப்ளோ டிஃப்ளெக்டர்
• அறிவுறுத்தல் கையேடு

4. அமைவு மற்றும் நிறுவல்

Follow these steps to properly install your Turbelle NanoStream 6040.005 pump:

4.1. பம்பை நிலைநிறுத்துதல்

Image: The Turbelle NanoStream 6040.005 pump securely mounted to the aquarium glass using its magnet holder.

• இருப்பிடத்தைத் தேர்வுசெய்க: Select a position in your aquarium where the pump can create optimal water flow without disturbing substrate or corals excessively. Ensure the pump is fully submerged.
• Attach Magnet Holder: Place the pump unit inside the aquarium and align the external magnet holder on the outside of the glass. The strong magnets will secure the pump in place. The magnet holder is suitable for glass thicknesses up to 12 mm (1/2 inch).
• திசையை சரிசெய்யவும்: The pump's outlet can be rotated to direct the water flow as desired.

4.2. கட்டுப்படுத்தியை இணைத்தல்

Image: The Tunze Turbelle Controller 7020, showing its interface for adjusting pump settings and modes.

• Connect Pump to Controller: Plug the pump's cable into the designated port on the Turbelle Controller 7020.
• மின்சார விநியோகத்தை இணைக்கவும்: Plug the power supply unit into the controller, then plug the power supply into a suitable electrical outlet.
• ஆரம்ப பவர்-அப்: The pump will perform a brief self-test upon initial power-up.

5. இயக்க வழிமுறைகள்

The Turbelle NanoStream 6040.005 is controlled via the Turbelle Controller 7020, offering various modes and settings.

5.1. Controller Overview

படம்: விரிவானது view of the Tunze Turbelle Controller 7020, highlighting its control functions.

The controller allows you to adjust flow rate, set wave patterns, and utilize special functions like the food timer.

5.2. அடிப்படை செயல்பாடு

• பயன்முறை தேர்வு: Use the "Mode" button to cycle through different operating modes (e.g., Constant, Pulse, Wave).
• ஓட்டம் சரிசெய்தல்: Use the "+" and "-" buttons to increase or decrease the flow rate in Constant mode, or to adjust pulse intensity/duration in other modes.
• Food Timer: Press the "Food Timer" button to temporarily stop the pump for approximately 10 minutes, allowing fish to feed undisturbed. The pump will automatically resume operation after the timer expires.
• Wave Search: The "Wave Search" function helps to find the optimal wave frequency for your aquarium.

5.3. WIFI/Cloud Control

The HUB Edition features WIFI/Cloud-based control. Refer to the separate Tunze app manual for detailed instructions on connecting your controller to your home network and managing it remotely via the cloud.

6. பராமரிப்பு

Regular maintenance ensures optimal performance and longevity of your Turbelle NanoStream pump.

6.1. பம்பை சுத்தம் செய்தல்

Image: The Turbelle NanoStream 6040.005 pump, illustrating its components for easy disassembly and cleaning.

• மின் இணைப்பை துண்டிக்கவும்: Always unplug the pump from the power outlet before cleaning.
• மீன்வளத்திலிருந்து அகற்று: மீன்வளத்திலிருந்து பம்பை கவனமாக அகற்றவும்.
• பிரித்தெடுக்கவும்: Gently detach the flow deflector and the protective cage. The impeller can then be carefully removed.
• சுத்தமான கூறுகள்: Use a soft brush and warm water to remove algae, calcium deposits, and other debris from all pump components, especially the impeller and its housing. For stubborn deposits, a mild vinegar solution can be used, followed by thorough rinsing.
• மீண்டும் ஒன்று சேர்: Reassemble the pump in reverse order, ensuring all parts are correctly seated.
• அதிர்வெண்: Clean the pump every 1-3 months, depending on the amount of debris and algae in your aquarium.

6.2. Cable Inspection

Periodically inspect the power cable for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and contact Tunze support.

7. சரிசெய்தல்

சில பொதுவான பிரச்சினைகள் மற்றும் அவற்றின் தீர்வுகள் இங்கே:

8. விவரக்குறிப்புகள்

9. உத்தரவாதம்

The Tunze Turbelle NanoStream 6040.005 HUB Edition comes with a 5 வருட உத்தரவாதம் from the date of purchase. This warranty covers manufacturing defects and material faults under normal use conditions. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, neglect, or unauthorized modifications.

10. ஆதரவு மற்றும் தொடர்புத் தகவல்

For further assistance, technical support, or warranty inquiries, please contact Tunze customer service or visit the official Tunze webதளம்.

ஆன்லைன் ஆதரவு: Visit the Tunze Store on Amazon

ஆதரவைத் தொடர்பு கொள்ளும்போது உங்கள் தயாரிப்பு மாதிரி எண் (6040.005) மற்றும் கொள்முதல் தேதியைத் தயாராக வைத்திருக்கவும்.