Youmile DC 12V 3A 4-Wire PC CPU Fan Speed Control Module

1. அறிமுகம்

The Youmile DC 12V 3A 4-Wire PC CPU Fan Speed Control Module is designed to automatically regulate the speed of 4-wire PWM fans based on detected temperature. This module helps optimize cooling performance, reduce fan noise, and extend fan lifespan by ensuring fans operate only when necessary and at appropriate speeds. It features a digital display for real-time temperature and fan speed monitoring.

2. தயாரிப்பு முடிந்துவிட்டதுview

This module provides intelligent fan control for various applications, including PC CPU cooling, internal chassis modification, and external DIY cooling solutions. Its compact design and clear digital display make it easy to integrate and monitor.

படம் 2.1: முன் view of the Youmile Fan Speed Control Module, highlighting the digital display, four-wire fan connector, temperature probe input, and setting buttons.

முக்கிய அம்சங்கள்:

• Automatic Fan Speed Adjustment: Dynamically adjusts fan speed based on real-time temperature readings from the NTC probe.
• டிஜிட்டல் எல்இடி காட்சி: Shows current temperature and fan speed (RPM/10) for easy monitoring.
• Temperature Thresholds: Configurable acceleration, full-speed, and shutdown temperature points.
• PWM கட்டுப்பாடு: Specifically designed for 4-wire PWM fans, providing precise speed modulation.
• சிறிய வடிவமைப்பு: Small form factor for easy integration into various systems.

3. தொகுப்பு உள்ளடக்கங்கள்

தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என்பதை சரிபார்க்கவும்:

• 1 x Fan Speed Control Module (Model JK-YM-771)
• 1 x 10K B3950 NTC Temperature Probe
• 1 x 3-pin Cable
• 1 x DC Solder-Free Female Connector

4. விவரக்குறிப்புகள்

Image 4.1: Physical dimensions of the module (53mm x 18.8mm) and the 50cm temperature probe.

5. அமைவு மற்றும் நிறுவல்

Follow these steps to correctly install and connect your fan speed control module:

Image 5.1: Detailed pin description and wiring for power input, probe, and fan connection.

1. மின் இணைப்பு: Connect a DC 12V power supply to the module's power input terminals. Ensure correct polarity (+ and -). The module supports a voltage வரம்பு DC 8V முதல் 16V வரை.
2. மின்விசிறி இணைப்பு: Connect your 4-wire PWM fan to the designated fan connector on the module. Important: This module only supports 4-wire PWM fans. It is not compatible with 2-wire or 3-wire fans. The fan current should not exceed 3.3A.
3. வெப்பநிலை ஆய்வு இணைப்பு: Connect the NTC 10K B3950 temperature probe to the 'NTC' interface. Position the probe in the area where temperature monitoring is required (e.g., near a CPU heatsink, inside a chassis).
4. ஆரம்ப பவர் ஆன்: Once all connections are secure, apply power. The digital display will light up, showing either temperature or fan speed.

Image 5.2: Visual representation of fan speed increasing with temperature and the module's exclusive support for 4-wire PWM fans.

6. இயக்க வழிமுறைகள்

The module features a digital display and three buttons for operation and configuration.

படம் 6.1: முடிந்ததுview of button functions and detailed temperature parameter descriptions.

6.1 காட்சி முறைகள்

• சிவப்பு எல்.ஈ.டி: Indicates the display shows the current temperature (°C).
• நீல LED: Indicates the display shows the fan speed (RPM divided by 10). For example, '150' means 1500 RPM.
• பச்சை எல்.ஈ.டி: Indicates the fan is currently activated and running. If off, the fan is powered off.

6.2 பொத்தான் செயல்பாடுகள்

• "+" and "-" Buttons:
  • When running: Tap to switch the display mode between temperature (°C) and fan speed (RPM/10).
  • When setting parameters: Tap to increase or decrease values. Hold to adjust continuously.
• "சரி" பொத்தான்:
  • While running (short press): Enter the minimum speed setting (range: 1-100%). This value determines the fan speed at the 'L' (low temperature) setting. Press 'OK' again to save and exit.
  • While running (long press): Enter temperature settings. Use "+" and "-" to adjust values. Short press "OK" to cycle through the settings: 'L' (Low temperature), 'H' (High temperature), 'C' (Shutdown temperature), 'd' (Duty Cycle / PWM output direction). Press 'OK' again to save and exit.
  • While powered off (hold "OK" to power on): Enter function settings. Use "-" to change settings. Short press "OK" to confirm and save.

6.3 வெப்பநிலை அமைப்புகள்

These parameters are configured by long-pressing the "OK" button while the unit is running.

• L (Acceleration Temperature):
  • வரம்பு: 5°C – 94°C
  • When the detected temperature exceeds this value, the fan begins to ramp up its speed.
• H (Full-Speed Temperature):
  • வரம்பு: 10°C – 99°C
  • When the detected temperature exceeds this value, the fan runs at full speed (100% PWM duty cycle).
• C (Shutdown Temperature):
  • வரம்பு: 0°C – 92°C
  • If set above 0°C, the fan will shut off completely when the temperature drops below this value. If the temperature then rises above the 'L' (Acceleration Temperature) while shut down, the fan will restart.
  • If set to 0°C, the shutdown function is disabled, and the fan will always receive power (never completely turn off based on temperature).

Note on Temperature Differences: The difference between 'L' and 'H' temperatures cannot be less than 5°C. The difference between 'C' and 'L' temperatures cannot be less than 2°C.

6.4 d (Duty Cycle / PWM Output Direction Setting)

• வரம்பு: -9 முதல் +9 வரை
• This setting adjusts the direction or polarity of the PWM signal.
• d = 0: Standard PWM output (forward direction). This is the default and recommended setting for most fans.
• d = 1 to 9: Maintains forward direction; may fine-tune signal timing for specific fan types.
• d = -1 to -9: Inverts the PWM signal (reverse direction). Most fans do not support reverse rotation. Use 'd = 0' or positive values for compatibility with standard PWM fans.

7. விண்ணப்பங்கள்

The Youmile Fan Speed Control Module is versatile and can be used in various scenarios requiring intelligent fan control:

படம் 7.1: எ.கா.amples of the module's application with computer 4-pin fans, CPU fans, internal chassis modification, and external DIY cooling setups.

• PC CPU Cooling: Integrate with CPU heatsink fans for dynamic temperature management.
• Computer Chassis Fans: Control case fans to maintain optimal internal temperatures and reduce system noise.
• Internal Chassis Modification: For custom PC builds or modifications where precise fan control is desired.
• External DIY Cooling: Suitable for various electronic projects requiring temperature-controlled ventilation.

8. சரிசெய்தல்

• Fan not spinning or not responding:
  • Ensure the fan is a 4-wire PWM type. This module is not compatible with 2-wire or 3-wire fans.
  • சரியான இருக்கை மற்றும் துருவமுனைப்புக்காக அனைத்து வயரிங் இணைப்புகளையும் சரிபார்க்கவும்.
  • Verify the power supply is within the DC 8V-16V range and provides sufficient current (fan current ≤ 3.3A).
  • Check the 'C' (Shutdown Temperature) setting. If the current temperature is below 'C' and 'C' is set above 0, the fan will be off.
• தவறான வெப்பநிலை அளவீடு:
  • Ensure the NTC temperature probe is securely connected to the module.
  • Verify the probe is correctly positioned to measure the desired temperature.
  • Note the specified temperature measurement error (0~50°C less than 1.2°C; other ranges less than 2°C).
• மின்சாரம் நிறுத்தப்பட்ட பிறகு சேமிக்கப்படாத அமைப்புகள்:
  • While the module is designed to retain settings, in rare cases or with unstable power, settings might reset. Re-enter your desired parameters if this occurs.
• Fan running at full speed constantly:
  • Check the 'H' (Full-Speed Temperature) setting. If the measured temperature is above 'H', the fan will run at 100% speed.
  • Ensure the temperature probe is functioning correctly and not reporting an artificially high temperature.

9. பராமரிப்பு

• சுத்தம்: Keep the module free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
• இணைப்புகள்: அனைத்து வயரிங் இணைப்புகளும் பாதுகாப்பாக இருப்பதை உறுதிசெய்ய அவ்வப்போது அவற்றைச் சரிபார்க்கவும்.
• சுற்றுச்சூழல்: Operate the module within its specified temperature and humidity ranges. Avoid exposure to extreme conditions or moisture.

10. உத்தரவாதம் மற்றும் ஆதரவு

உத்தரவாதத் தகவல் அல்லது தொழில்நுட்ப ஆதரவுக்கு, சில்லறை விற்பனையாளர் அல்லது உற்பத்தியாளரின் அதிகாரியைப் பார்க்கவும். webஎந்தவொரு உத்தரவாதக் கோரிக்கைகளுக்கும் உங்கள் கொள்முதல் ரசீதை வைத்திருங்கள்.