DieseRC Wireless Roller Shutter Remote Control Switch User Manual

1. அறிமுகம்

This manual provides comprehensive instructions for the installation, operation, and programming of your DieseRC Wireless Roller Shutter Remote Control Switch. This device is designed to wirelessly control AC motors, enabling forward, reverse, and stop functions for applications such as garage doors, electric gates, and roller shutters. Please read this manual carefully before use to ensure proper functionality and safety.

2. தொகுப்பு உள்ளடக்கங்கள்

• 1 x Relay Receiver Board
• 2 x Transmitters (battery included)
• 1 x தயாரிப்பு கையேடு

3. விவரக்குறிப்புகள்

4 அமைவு

4.1 பாதுகாப்பு முன்னெச்சரிக்கைகள்

• Ensure power is disconnected before any wiring.
• Wiring should be performed by a qualified electrician if you are unsure.
• Verify correct polarity (Live, Neutral) to avoid damage or short circuits.

4.2 Wiring the Receiver

Connect the receiver to your AC motor and power supply according to the diagram below. The receiver supports AC 90V-250V input. Ensure secure connections for all wires.

Image: Receiver dimensions and wiring diagram. Note the 'Up' and 'Down' motor connections and AC 90-250V power input.

The receiver features large screw ports for easy installation and metal clips for secure wiring. A transparent flip cover allows for circuit adjustment.

படம்: விரிவானது view of the receiver's screw terminals and cable compatibility.

4.3 ஆரம்ப பவர்-அப்

After wiring, apply power to the receiver. The indicator light on the receiver will illuminate, indicating it is ready for operation or programming.

4.4 தயாரிப்பு முடிந்துவிட்டதுview வீடியோ

காணொளி: இந்த காணொளி ஒரு காட்சிப் பார்வையை வழங்குகிறது.view of the DieseRC 2201COM receiver and KT03 remote control, highlighting their design and features.

5. இயக்க முறைகள்

The DieseRC remote control switch supports three main operating modes: Momentary, Toggle, and Latched. All products are set to Toggle mode before shipment. If you wish to change the operating mode, you must first reset the receiver (see Section 6.2).

Image: Visual representation of Momentary, Toggle, Latched, and Delay operating modes.

5.1 தற்காலிக பயன்முறை

• "ஐ அழுத்திப் பிடிக்கவும்▲" button: The motor rotates forward.
• Release the button: The motor stops.

5.2 மாற்று முறை

• "ஐ அழுத்தவும்▲" button once: The motor rotates forward.
• "ஐ அழுத்தவும்▲" button again: The motor stops.

5.3 லாட்ச்டு பயன்முறை

• "ஐ அழுத்தவும்▲" button: The motor rotates forward.
• "ஐ அழுத்தவும்▼" button: The motor rotates backward.
• "ஐ அழுத்தவும்■" button: The motor stops.

5.4 விண்ணப்பம் Exampலெஸ்

படம்: Example of the remote control switch used for a garage door.

Video: This video demonstrates various applications of the DieseRC Wireless Roller Shutter Remote Control Switch, showcasing its functionality in controlling different types of AC motors.

6. ரிமோட் கண்ட்ரோல்களை நிரலாக்குதல்

The receiver can store up to 20 transmitters. Follow these steps to program your remote control to the desired operating mode.

Image: Step-by-step programming instructions for different modes.

6.1 Learning a Remote Control

1. Press the learning button on the receiver:
   • அழுத்தவும் 1 முறை for Momentary Mode.
   • அழுத்தவும் 2 முறை for Toggle Mode.
   • அழுத்தவும் 3 முறை for Latched Mode.
   Wait 3 seconds after pressing.
2. "ஐ அழுத்தவும்▲" button on your remote control. Wait 3 seconds.
3. "ஐ அழுத்தவும்▼" button on your remote control. The programming is successful.

Note: For Latched Mode, the remote control requires 3 keys (Forward, Reverse, Stop).

6.2 பெறுநரை மீட்டமைத்தல்

To clear all programmed remote controls from the receiver's memory:

• ரிசீவரில் கற்றல் பொத்தானை அழுத்தவும். 8 முறை.

Important: After resetting, all previously programmed remote controls will no longer work and must be re-programmed.

6.3 Programming Demonstration Video

Video: A step-by-step video guide on how to program the DieseRC 2201COM receiver, covering the different operating modes and remote control pairing.

7. பராமரிப்பு

7.1 Transmitter Battery Replacement

The remote control transmitters use 2 x CR2016 batteries. If the remote's range decreases or it becomes unresponsive, replace the batteries. Refer to the transmitter image for visual guidance.

Image: DieseRC remote control transmitter.

7.2 சுத்தம் செய்தல்

Wipe the receiver and transmitters with a dry, soft cloth. Do not use abrasive cleaners or solvents.

7.3 சுற்றுச்சூழல் நிலைமைகள்

Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight. Ensure the receiver is installed in a location with adequate ventilation.

8. சரிசெய்தல்

• ரிமோட் கண்ட்ரோல் பதிலளிக்கவில்லை:
  • Check the battery in the transmitter. Replace if necessary.
  • Ensure the receiver has power.
  • If the receiver was recently reset, re-program the remote control (see Section 6.1).
  • Ensure the remote is within the effective operating range (20-50 meters).
• மோட்டார் நகரவில்லை:
  • Verify all wiring connections are secure and correct (refer to Section 4.2).
  • Check the power supply to the receiver and motor.
  • Ensure the motor itself is functioning correctly.
• குறுக்கீடு:
  • While multiple remote control sets can be used in the same area without interference (except in Momentary mode), strong local RF interference might affect performance. Try relocating the receiver if possible.

9. உத்தரவாதம் மற்றும் ஆதரவு

DieseRC products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please reach out to DieseRC customer support through the vendor's contact information provided at the point of purchase.