அறிமுகம்
This manual provides detailed instructions for the installation, operation, and maintenance of the replacement agitator cam dogs kit for Whirlpool LA5700XTW0 washing machines. This kit is designed to restore proper agitator function by replacing worn or damaged cam dogs, which are crucial components for the agitator's one-way clutch mechanism.
பாதுகாப்பு தகவல்
- மின் இணைப்பை துண்டிக்கவும்: Always unplug the washing machine from the electrical outlet before attempting any repairs or maintenance to prevent electric shock.
- பாதுகாப்பு உபகரணங்களை அணியுங்கள்: கூர்மையான விளிம்புகளிலிருந்து உங்கள் கைகளைப் பாதுகாக்க வேலை கையுறைகளையும், கண்களைப் பாதுகாக்க பாதுகாப்பு கண்ணாடிகளையும் பயன்படுத்தவும்.
- தொழில்முறை உதவி: If you are unsure about any step or lack the necessary tools or experience, consult a qualified appliance repair technician.
- பாகங்களை கவனமாக கையாளவும்: Some parts may have sharp edges or pinch points. Exercise caution during handling and installation.
தொகுப்பு உள்ளடக்கங்கள்
The kit typically includes the following components:
- Agitator Cam Dogs (4 pieces, typically beige/white plastic)
- Agitator Drive Block (white plastic, often with internal splines)
- Agitator Drive Block Retainer (black plastic ring)
- Tub Seal/O-ring (black rubber ring)

Image: Components of the agitator cam dogs kit, including four cam dogs, two agitator drive blocks (white and black), and a black O-ring.
நிறுவல் வழிமுறைகள்
Follow these steps to replace the agitator cam dogs in your Whirlpool LA5700XTW0 washer:
- மின் இணைப்பை துண்டிக்கவும்: Unplug the washing machine from the wall outlet.
- Remove Agitator Cap: Locate and remove the agitator cap, usually found at the top center of the agitator. This may involve prying it off or unscrewing it.
- Remove Agitator Bolt: Use a socket wrench to remove the bolt securing the agitator to the transmission shaft. The bolt is typically located under the agitator cap.
- Remove Agitator: Carefully pull the agitator straight up and out of the washer tub. It may require some force or wiggling.
- Disassemble Agitator: Separate the upper and lower sections of the agitator. This usually involves twisting or prying them apart.
- Remove Old Cam Dogs: Inside the lower agitator section, you will find the old cam dogs. Remove them by hand. Note their orientation for proper installation of the new ones.
- Install New Cam Dogs: Place the new cam dogs into their designated slots in the lower agitator section. Ensure they are seated correctly and facing the proper direction to engage with the drive block.
- Reassemble Agitator: Reattach the upper agitator section to the lower section, ensuring it clicks securely into place.
- Reinstall Agitator: Carefully lower the assembled agitator back onto the transmission shaft in the washer tub. Ensure it is properly aligned.
- Secure Agitator: Reinsert and tighten the agitator bolt with the socket wrench. Do not overtighten.
- Replace Agitator Cap: Snap or screw the agitator cap back into place.
- சக்தியை மீண்டும் இணைக்கவும்: சலவை இயந்திரத்தை மீண்டும் மின் நிலையத்தில் செருகவும்.
- சோதனை செயல்பாடு: Run a small wash cycle to ensure the agitator is functioning correctly and smoothly.
இயங்குகிறது
Once the agitator cam dogs are correctly installed, the agitator should operate as intended, providing proper washing action. The cam dogs allow the agitator to turn in one direction (agitate) and freewheel in the other (during spin), which is essential for effective cleaning.
பராமரிப்பு
- அவ்வப்போது ஆய்வு: If you notice a decrease in agitation effectiveness or unusual noises, inspect the agitator cam dogs for signs of wear, such as rounding or chipping.
- சுத்தம்: Periodically clean the agitator and its components to prevent lint and debris buildup, which can hinder proper operation.
- அதிக சுமைகளைத் தவிர்க்கவும்: Overloading the washer can put excessive strain on the agitator and its components, potentially leading to premature wear of the cam dogs.
சரிசெய்தல்
| அறிகுறி | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Agitator not moving or moving weakly | Worn or broken cam dogs | Replace the agitator cam dogs following the installation instructions. |
| Grinding or clicking noise during agitation | Damaged or improperly seated cam dogs | Inspect and reseat cam dogs. Replace if damaged. |
| Agitator spins with the tub during agitation | Cam dogs not engaging properly | Verify correct installation and orientation of cam dogs. |
விவரக்குறிப்புகள்
- தயாரிப்பு வகை: Washer Agitator Cam Dogs Kit
- Compatible Washer Model: Whirlpool LA5700XTW0
- பகுதி எண்: ACTO-HAPT-PL-06032025-17858 அறிமுகம்
- நிறம்: Black/White (components)
- பொருள்: நீடித்த பிளாஸ்டிக் மற்றும் ரப்பர்
- தொகுப்பு அளவு: 1 set (includes multiple components as listed in 'Package Contents')
உத்தரவாதம் மற்றும் ஆதரவு
As this is a replacement part from a generic brand, specific warranty information may vary. Please refer to the seller's return policy for details regarding returns or replacements. For this product, a 30-day refund/replacement policy is typically offered by the seller. For any product-related inquiries or support, please contact the seller directly through your purchase platform.



