1 அமைவு
1.1 தண்ணீர் தொட்டியை நிரப்புதல்
The BEAUTURAL 2-in-1 Steamer features a 200ml (6.76oz) removable water tank for easy refilling. To fill:
- Press the unlock button located at the base of the steamer to detach the water tank.
- Open the rubber gasket on the tank.
- Fill the tank with distilled, purified, or filtered water. Avoid using oils, perfumes, or scented additives, as these can cause mineral buildup and affect performance.
- Close the rubber gasket securely and reattach the water tank to the steamer until it clicks firmly into place.
Image: Detachable 200ml water tank for effortless refilling.
1.2 பவர் ஆன் மற்றும் ப்ரீ ஹீட்டிங்
The steamer operates on 120V only. Ensure you are using a compatible outlet.
- Plug the steamer into a 120V outlet. The extra-long 8ft (2.4m) power cord provides ampலீ அடையும்.
- Press the power button located on the back of the steamer.
- Allow the steamer to preheat for approximately 30 seconds until the power indicator light becomes solid. For first-time use, some residual water from testing might be emitted from the steam head; this is normal and will quickly disappear.
Image: Ceramic heating plate with 1200W high-power and 30-second fast heat-up.
2. இயக்க வழிமுறைகள்
2.1 Continuous Steam Mode
For continuous steam, ideal for vertical steaming of hanging garments:
- Once the steamer is preheated (indicator light solid), press the continuous steam button on the back of the handle.
- Hold the steamer upright and move it slowly over the fabric, allowing the steam to penetrate and relax wrinkles.
Image: Vertically ironing a hanging garment with the steamer.
2.2 Burst Steam Mode (for Ironing)
For stubborn wrinkles or when using the steamer as an iron on a flat surface:
- Before each use of the burst steam, press the burst steam button 6 times in a row.
- Then, press the burst steam button at 5-second intervals to avoid dripping.
- Turn off continuous steam before using burst steam for optimal results.
- Place the garment on a flat, heat-resistant surface. Press the steamer plate onto the fabric and activate the burst steam as needed to smooth out wrinkles.
Image: Steamer emitting a powerful burst of steam to eliminate tough wrinkles.
Image: Horizontally ironing a shirt on an ironing board.
2.3 துணி இணக்கத்தன்மை
The 310°F thermostatic ceramic plate is gentle yet effective on a wide range of fabrics, including:
- Delicate silk
- Sturdy linen
- கம்பளி
- பருத்தி
- பாலியஸ்டர்
- நைலான்
- வெல்வெட்
- பட்டு
- Blended fibers
Image: The steamer is suitable for various fabric types, including wool, silk, cotton, linen, nylon, and denim.
3. பராமரிப்பு
3.1 ஒவ்வொரு பயன்பாட்டிற்கும் பிறகு
To ensure longevity and optimal performance of your steamer:
- Unplug the steamer from the power outlet and allow it to cool completely.
- Empty any remaining water from the detachable tank after each steaming session. This prevents mineral buildup and ensures continued clean steaming.
- Store the steamer in a dry, safe place.
4. சரிசெய்தல்
பொதுவான பிரச்சினைகள் மற்றும் அவற்றின் தீர்வுகளுக்கு கீழே உள்ள அட்டவணையைப் பார்க்கவும்:
| பிரச்சினை | சாத்தியமான காரணங்கள் | தீர்வு |
|---|---|---|
| நீராவி இல்லை. | Steamer not plugged in or not switched on. | Plug in your steamer and switch it on. |
| Water tank not clicked fully in place. | Ensure that the water tank is installed properly (i.e., clicked in place). | |
| Steamer is in auto-shut-off mode. | Press the continuous steam button or the power button to reactivate the steamer. | |
| Burst steam has not been activated. | Before each use, press the burst steam button 6 times in a row to activate the burst steam. | |
| Not enough steam comes out. | Burst steam has been used too frequently. | Press the burst steam button at 5-second intervals. |
| Steamer is not heated to full temperature. | Always allow the steamer to preheat until the indicator light stays solid. | |
| நீராவி வெப்பமடையாது. | Steamer not plugged in or not switched on. | Plug in your steamer and switch it on. |
| Steamer is in auto-shut-off mode. | Press the continuous steam button or the power button to reactivate the steamer. | |
| Used at the incorrect voltage of 220-240V. Only 120 volts are suitable for this steamer. | The steamer is malfunctioning. Please get in touch with customer service. | |
| தண்ணீர் கசிகிறது. | Water tank not clicked fully in place, or cover not closed properly. | Ensure that the cover is closed and tank is installed properly. |
5. விவரக்குறிப்புகள்
- பிராண்ட்: அழகியல்
- மாதிரி: 722NA-0017
- உடை: 2-in-1 Steam & Iron
- நிறம்: ஊதா
- வாட்tage: 1200 வாட்ஸ்
- தொகுதிtage: 120 வோல்ட்
- திறன்: 200 மில்லிலிட்டர்கள் (6.76oz)
- வெப்பமூட்டும் தட்டு: 310°F Thermostatic Ceramic Plate
- வெப்பமயமாதல் நேரம்: 30 வினாடிகள்
- பாதுகாப்பு அம்சங்கள்: Anti-drip technology, Auto Shut-off (after 30 minutes of inactivity)
- பவர் கார்டு நீளம்: 8 அடி (2.4 மீ)
- பொருளின் எடை: 2.18 பவுண்டுகள்
- சேர்க்கப்பட்ட கூறுகள்: ஆடை ஸ்டீமர்
Image: Product dimensions and specifications of the BEAUTURAL 2-in-1 Steamer.
6. உத்தரவாதம் மற்றும் ஆதரவு
6.1 உத்தரவாதத் தகவல்
This BEAUTURAL product comes with a 2 வருட உத்தரவாதம்கூடுதலாக, ஒரு 30 நாள் ரிட்டர்ன் பாலிசி is standard. For warranty registration or to extend your warranty, please refer to the information provided in your product packaging or contact customer service.
6.2 வாடிக்கையாளர் ஆதரவு
If you encounter any issues not covered in this manual or require further assistance, please contact BEAUTURAL customer service. Contact details can be found on the product packaging or the official BEAUTURAL webதளம்.
7. அதிகாரப்பூர்வ தயாரிப்பு வீடியோ
காணொளி: ஒரு அதிகாரிview of the BEAUTURAL 2-in-1 Steamer & Iron, demonstrating its features and ease of use.