1. அறிமுகம்
The DUALSKY XC-45-Lite is a high-performance, cost-effective, and ultra-light 45A brushless Electronic Speed Controller (ESC) designed for various RC aircraft models, including 450-class helicopters (3D flight) and fixed-wing aircraft up to .30 class sports. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your XC-45-Lite ESC.
2. பாதுகாப்பு தகவல்
Please read and understand all safety warnings before operating your ESC. Failure to do so may result in property damage, personal injury, or death.
- பயன்பாட்டில் இல்லாதபோது எப்போதும் ESC இலிருந்து பேட்டரியைத் துண்டிக்கவும்.
- ஷார்ட் சர்க்யூட்களைத் தடுக்க அனைத்து இணைப்புகளும் பாதுகாப்பாகவும் முறையாக காப்பிடப்பட்டதாகவும் இருப்பதை உறுதிசெய்யவும்.
- சேதமடைந்த கம்பிகள் அல்லது இணைப்பிகளுடன் ESC-ஐ ஒருபோதும் இயக்க வேண்டாம்.
- ESC-ஐ நீர், ஈரப்பதம் மற்றும் தீவிர வெப்பநிலையிலிருந்து விலக்கி வைக்கவும்.
- Use only compatible batteries and motors as specified.
- Mount the ESC in a location with adequate airflow for cooling.
- Always perform a range check with your radio system before flight.
- Children should be supervised by an adult when operating RC models.
3. தொகுப்பு உள்ளடக்கங்கள்
- DUALSKY XC-45-Lite Brushless ESC Unit
4. விவரக்குறிப்புகள்
| அம்சம் | விவரக்குறிப்பு |
|---|---|
| ESC மாதிரி | XC-45-லைட் |
| பரிமாணங்கள் (L x W x D) | 67 x 25 x 7 மிமீ |
| எடை | 38 கிராம் |
| கலங்களின் எண்ணிக்கை | NiXX 5-9, 2-3 LiPo (7.4-11.1V) |
| Resistance (Ri) | 0.0026 ஓம் |
| அதிகபட்ச தொடர்ச்சியான மின்னோட்டம் | 45A |
| அதிகபட்ச தொடர்ச்சியான வெளியீடு | 450W |
| Max Burst Current | 60A |
| Max Burst Output | 612W |
| BEC / Dissipative Power | 5.2V/3A (Linear) |
| நிரல்படுத்தக்கூடியது | Throttle + ProgCARD |
| Input Wires | 120mm, 14AWG |
| வெளியீட்டு கம்பிகள் | 75mm, 16AWG |
| சிக்னல் கம்பி | 300mm JR |
| விளக்கம் | சிறிய அளவு |
| விண்ணப்பங்கள் | 450 Heli 3D Up to .30 Class Sports |
5 அமைவு
Follow these steps for proper installation and connection of your DUALSKY XC-45-Lite ESC:
- மோட்டார் இணைப்பு: Connect the three output wires (16AWG, 75mm) from the ESC to your brushless motor. The order of connection may affect motor rotation direction. If the motor spins in the wrong direction, swap any two of the three wires.
- பேட்டரி இணைப்பு: Connect the two input wires (14AWG, 120mm) from the ESC to your battery pack. Ensure correct polarity (red to positive, black to negative). Using a compatible battery (NiXX 5-9 cells or 2-3 LiPo cells) is crucial.
- ரிசீவர் இணைப்பு: Plug the signal wire (JR connector, 300mm) from the ESC into the throttle channel of your RC receiver. This typically corresponds to channel 3 on most radio systems.
- மவுண்டிங்: Securely mount the ESC in your aircraft, ensuring it has adequate ventilation to prevent overheating during operation. Avoid mounting it near sources of interference or in enclosed spaces.
6. இயக்க வழிமுறைகள்
Once the ESC is correctly installed and connected, follow these steps to operate your RC model:
- டிரான்ஸ்மிட்டர் ஆன்: Turn on your RC transmitter and ensure the throttle stick is at its lowest position.
- பேட்டரியை இணைக்கவும்: Connect the battery to the ESC. The ESC will emit a series of beeps indicating cell count and readiness.
- Throttle Calibration (if needed): If the motor does not respond correctly, you may need to calibrate the throttle range. Consult your radio system's manual for specific throttle calibration procedures. Generally, this involves powering on the ESC with the throttle stick at maximum, then moving it to minimum when prompted by beeps.
- Motor Arming: After successful initialization, the ESC will arm, and the motor will be ready to operate.
- Flight/Operation: Slowly advance the throttle stick to control motor speed. Always operate your model in a safe and open area.
- பேட்டரியை துண்டிக்கவும்: After use, always disconnect the battery from the ESC first, then turn off your transmitter.
7. நிரலாக்கம்
The DUALSKY XC-45-Lite ESC is programmable via Throttle input and a dedicated ProgCARD (Programming Card). The ProgCARD allows for easy adjustment of various parameters such as brake settings, battery type, cut-off voltage, timing, and start-up mode. Refer to the ProgCARD manual for detailed instructions on how to use it to customize your ESC settings.
8. பராமரிப்பு
Proper maintenance will extend the lifespan of your ESC:
- Regularly inspect all wires and connectors for signs of wear, fraying, or corrosion.
- Keep the ESC clean and free from dust, dirt, and debris.
- Ensure the ESC is not exposed to excessive vibrations.
- Check for any physical damage to the ESC casing or heat sink.
- Store the ESC in a dry, cool place when not in use.
9. சரிசெய்தல்
If you encounter issues with your XC-45-Lite ESC, refer to the following common problems and solutions:
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Motor does not start or stutters | Incorrect motor/ESC wiring, throttle not calibrated, low battery voltage, motor or ESC damage | Check all connections, recalibrate throttle, charge/replace battery, inspect motor/ESC for damage |
| மோட்டார் தவறான திசையில் ஓடுகிறது | தவறான மோட்டார் கம்பி இணைப்பு | மூன்று மோட்டார் கம்பிகளில் ஏதேனும் இரண்டை மாற்றவும். |
| ESC அதிக வெப்பமடைகிறது | Poor ventilation, motor/propeller too large, incorrect timing setting | Improve airflow, use smaller prop/motor, adjust motor timing via ProgCARD |
| No response from ESC | No power, faulty signal wire, damaged ESC | Check battery connection, verify receiver connection, test with another ESC if possible |
| Motor cuts out during operation | குறைந்த தொகுதிtage cut-off activated, overheating, signal loss | Charge battery, check for overheating, verify radio range and signal integrity |
10. பயனர் குறிப்புகள்
- For optimal performance and longevity, always ensure your battery is fully charged before use.
- Consider using a watt meter to monitor current draw and ensure your setup is within the ESC's limits.
- If using a ProgCARD, experiment with different settings in a controlled environment to find the best configuration for your specific motor and aircraft.
- Regularly check the temperature of the ESC during initial flights to ensure it's not overheating.
11. உத்தரவாதம் மற்றும் ஆதரவு
DUALSKY products are manufactured to high-quality standards. For warranty claims or technical support, please contact your original point of purchase or visit the official DUALSKY website for contact information. Keep your proof of purchase for any warranty-related inquiries. The warranty typically covers manufacturing defects but may not cover damage due to misuse, improper installation, or unauthorized modifications.
