ஆண்ட்ராய்டு கார் வழிசெலுத்தல் பயனர் கையேடு

Android Car Navigation - featured image

ஆண்ட்ராய்டு-லோகோஆண்ட்ராய்டு கார் வழிசெலுத்தல் பயனர் கையேடு

Android கார் வழிசெலுத்தல்

ஆண்ட்ராய்டு கார் நாvigation பயனர் கையேடுஆண்ட்ராய்டு கார் வழிசெலுத்தல் - 1

கார் ஆடியோ மற்றும் வீடியோ அமைப்பு

ஆண்ட்ராய்டு கார் வழிசெலுத்தல் - 2

பயன்பாட்டிற்கான முன்னெச்சரிக்கைகள்

உங்களுக்கும் உங்கள் கார் மற்றும் மற்றவர்களுக்கும் பாதுகாப்பை உறுதி செய்ய, பின்வரும் அடிப்படைத் தேவைகளைச் செய்ய மறக்காதீர்கள்:

  • அலகு உபயோகிக்கும் முன் அனைத்து தொடர்புடைய வழிமுறைகளையும் கவனமாக படிக்கவும். முறையற்ற செயல்பாட்டால் அலகு சேதமடைந்தால், உத்தரவாதம் கிடைக்காது.
  • இந்த சாதனம் 12V இயந்திரம் மற்றும் 12V மின்சக்தியில் மட்டுமே பயன்படுத்த முடியும்.
  • பாதுகாப்பான ஓட்டுதலை உறுதி செய்வதற்கும் சட்டவிரோத போக்குவரத்து விதிமுறைகளைத் தவிர்ப்பதற்கும், வாகனம் ஓட்டும்போது நிகழ்ச்சிகளைப் பார்க்கவோ அல்லது அலகு இயக்கவோ கூடாது.
  • குறுகிய சுற்றுகளைத் தடுக்க. தயவுசெய்து எந்த உலோகப் பொருட்களையும் சாதனத்தின் உள்ளே வைக்கவோ அல்லது விட்டுவிடவோ வேண்டாம்.
  • குறுகிய சுற்றுகளைத் தவிர்க்க. அலகு மழையுடன் தொடர்பு கொள்ள அனுமதிக்காதீர்கள்.
  • இந்த கையேட்டின் படி இந்த கையேட்டை பயன்படுத்தவும். பராமரிப்புக்காக அலகு திறக்க வேண்டாம். ஏதேனும் பழுது இருந்தால், பழுதுபார்க்க தொழில்முறை பழுதுபார்க்கும் நிலையத்திற்குச் செல்லவும்.
  • இயந்திரம் அணைக்கப்படும் போது, ​​கார் ஆடியோவை நீண்ட நேரம் பயன்படுத்த வேண்டாம், இல்லையெனில், அது பேட்டரி சக்தியிலிருந்து தீர்ந்துவிடும்.
  • கூர்மையான பொருளைக் கொண்டு திரையைத் தொடவோ தட்டவோ வேண்டாம்.
  • எங்கள் ஆண்ட்ராய்டு கார் வழிசெலுத்தல் அமைப்பைப் பயன்படுத்தியதற்கு மிக்க நன்றி.

விரைவான செயல்பாடு

  1. திரை செயலிழந்த பிறகு விரைவான செயல்பாடு, (மாறுதல்) (அறிவிப்பு)
  2. வைஃபை கிளிக் செய்து வைஃபை கடவுச்சொல் இணைப்பை அமைக்க மீண்டும் அறிவிப்பை கிளிக் செய்யவும்.
  3. திரையில் சுவிட்சைத் தொடவும்.
  4. அசல் கார் சக்தி ampலைஃபையர் அமைப்புகள்.
  5.  நினைவகத்திற்கான சாவியை அழிக்கவும். (டி. ஸ்கிரீன் ஷாட்கள்
  6. புளூடூத் இணைப்பு.
  7. Android அமைப்புகள்.
  8. இயந்திரத்தில் அமைக்கவும்.
  9. வீடியோ வெளியீடு.

கற்றுக்கொள்ள பொத்தானைத் தொடவும்

உள்ளங்கையின் ஐந்து விரல்கள் திரையை சில விநாடிகள் அழுத்திய பிறகு, அளவுத்திருத்தம் மேல்தோன்றும். கற்றலை உறுதிப்படுத்த பொத்தானை அமைக்க 1.2.3.4 ஐ கிளிக் செய்யவும். முதல் படி மஞ்சள் நிறத்தைக் கற்கத் தொடங்கி, மஞ்சள் நிறத்தை மாற்ற மின் கடிதத்தைக் கிளிக் செய்து, லைட் போர்டு சுவிட்ச் மெஷினின் ஆயங்களை மீண்டும் கிளிக் செய்யவும். சக்தி கடிதத்தின் மஞ்சள் நிறம் மறைந்துவிடும், எனவே இறுதியாக, உறுதிப்படுத்த நெருக்கமான நிலையைக் கிளிக் செய்யவும் மற்றும் அமைப்பு வெற்றிகரமாக உள்ளது.

உள்ளூர் இசை

உள்ளூர் இசை இடைமுகத்தை உள்ளிட "உள்ளூர் இசை" என்ற முக்கிய இடைமுகத்தைக் கிளிக் செய்யவும். இயந்திரத்தில் SD கார்டு அல்லது USB இடைமுகம் மற்றும் தொடர்புடைய மீடியா இருக்கும் போது இந்த செயல்பாடு பயனுள்ளதாக இருக்கும் file.

  1. உள்ளூர் வானொலி இடைமுகத்தை உள்ளிடுவதற்கு "உள்ளூர் வானொலி" என்ற முக்கிய இடைமுகத்தை கிளிக் செய்யவும்
  2. முகப்பு இடைமுகத்தைக் கிளிக் செய்யவும், பின்னர் வெளியேற மற்ற செயல்பாட்டு ஐகானைக் கிளிக் செய்யவும்
  3. சேமிக்கப்பட்ட அனைத்து ரேடியோ பதிவுகளையும் அழிக்க மற்றும் ஒரு தானியங்கி தேடலைச் செய்ய கிளிக் செய்யவும்.
  4. வானொலியை மேலே/கீழ் தேடவும். கண்டுபிடிக்கப்பட்ட ஒவ்வொரு வானொலியும் தேடலை இடைநிறுத்தும்.
  5.  சேகரிப்பு எங்கே சேமிக்கப்படுகிறது
  6. Qs கடைசி வானொலி நிலையம் / அடுத்த வானொலி நிலையத்தைக் கிளிக் செய்யவும் ®. தொகுப்பு ஒளிபரப்பை நீக்க இங்கே கிளிக் செய்யவும்
  7. கே. சேகரிப்பு வானொலியை உலாவுக
  8. FM/AM பட்டைகளுக்கு இடையில் மாறவும்
  9. முந்தைய இடைமுகத்திற்கு திரும்பவும்
  10. வலுவான/நடுத்தர இடையே தானியங்கி தேடல் பூட்டு உணர்திறனைத் தேர்ந்தெடுக்கலாம்.

வீடியோ பிளேபேக்

வீடியோ இடைமுகம் (RMVB / RM / FLV / 3GP / 1080 p HD வீடியோவை ஆதரிக்கவும்) மற்றும் பிற வீடியோ வடிவங்களில் நுழைய "வீடியோ ப்ளே" என்ற முக்கிய இடைமுகத்தைக் கிளிக் செய்யவும்.
இயந்திரத்தில் SD கார்டு அல்லது USB இடைமுகம் மற்றும் தொடர்புடைய மீடியா இருக்கும் போது இந்த செயல்பாடு பயனுள்ளதாக இருக்கும் file. அனைத்து / SD / U வட்டு/ இடையே மாற "அனைத்து" ஐகானை கிளிக் செய்யவும்file உலாவுதல். வீடியோ எப்போது file படிக்கப்பட்டது, கணினி தானாகவே இயங்குகிறது file

காட்டப்பட்டது. ஆன்லைன் செய்திகள்

நெட்வொர்க் செய்தி இடைமுகத்தில் (நெட்வொர்க்குடன் இணைக்க வேண்டும்) நுழைய பிரதான இடைமுகம் "நெட்வொர்க் நியூஸ்" ஐ கிளிக் செய்யவும், நீங்கள் எந்த நேரத்திலும் சமீபத்திய செய்திகளைப் பெறலாம். தானியங்கி குரல் பின்னணி

விளக்க ஐகானைக் கிளிக் செய்யவும்

  1.  முகப்பு முகப்பில் நுழைந்த பிறகு, வெளியேற மற்ற செயல்பாட்டு ஐகானைக் கிளிக் செய்யவும்.
  2. செய்திகளை உலாவுகிறது
  3. முந்தைய இடைமுகத்திற்கு திரும்பவும்
  4.  தானியங்கி குரல் இடைநிறுத்தம்/பிளேபேக்
  5. விரிவான செய்திகளை உள்ளிட நேரடியாக செய்தி பட்டியலில் கிளிக் செய்யவும்

உலாவி

உலாவி இடைமுகத்தில் நுழைய முக்கிய இடைமுகம் "உலாவி" மீது கிளிக் செய்யவும்

  1. பிரதான இடைமுகத்திற்கு திரும்ப அல்லது மேல் நிலைக்கு திரும்ப மேலே உள்ள கணினி நிலை பட்டியில் கிளிக் செய்யவும்
  2. "தேடல் அல்லது அறிமுகம்" என்பதைக் கிளிக் செய்யவும் URL, ”மேலே உள்ளிட, விசைப்பலகையை பாப் அப் செய்யவும் URLபக்கத்திற்குள் நுழைய "GO" ஐ கிளிக் செய்யவும்
  3. பக்கத்தின் நடுவில் சேகரிக்கப்பட்ட பக்கங்களை திருத்தலாம் மற்றும் நீக்கலாம் மற்றும் பக்கத்தின் நடுவில் உள்ள வங்கிக்கு வளரலாம். நீங்கள் சேர்க்கலாம் urls.
  4.  மேல்/கீழ் அடுக்குக்குத் திரும்பி, தற்போது திறந்திருக்கும் பக்கங்களின் எண்ணிக்கையைக் காட்டவும், "+" கணினி அமைப்புகளின் மேல் வலது மூலையில் உள்ள புக்மார்க் பக்கத்தை உள்ளிட பெரிதாக்க கிளிக் செய்யவும்

கணினி தகவல்

தொழிற்சாலை அமைப்புகளை மீட்டெடுக்க, 'இயல்புநிலை அமைப்புகள்' என்பதைக் கிளிக் செய்யவும்; திரை அளவுத்திருத்த இடைமுகம் Android மேம்படுத்தல் மற்றும் MCU மேம்படுத்தலுக்கு "திரை" என்பதைக் கிளிக் செய்யவும். ஆண்ட்ராய்டின் மிக உயர்ந்த பதிப்பிற்கு ஆண்ட்ராய்டு மேம்படுத்தப்பட்டது; MCU மென்பொருளின் மிக உயர்ந்த பதிப்பிற்கு MW மேம்படுத்தல் வெளிப்புற ஆடியோ-வீடியோ ஆடியோ மற்றும் வீடியோவை இயக்க தொடர்புடைய சாதனங்களை இணைக்கிறது files.

ஸ்டீயரிங் கற்றல்

திசைமாற்றி கற்றல் படிநிலைகள் பின்வருமாறு:

  1. ஸ்டீயரிங் வீலில் உள்ள எந்த பட்டனையும் அழுத்தவும், ஸ்டீயரிங் மீது இடைமுகம் நீண்ட அழுத்தத்தைக் காண்பிக்கும், மேலும் ஸ்டீயரிங் பட்டனை சிறிது நேரம் அழுத்தாமல் நீங்கள் கற்றுக்கொள்ள முடியாது.
  2. நறுக்குதல் செயல்பாட்டை அறிய திரையில் கிளிக் செய்யவும்
  3. ஸ்டீயரிங் மீது உள்ள செயல்பாட்டு பொத்தானைக் கிளிக் செய்து, ஸ்டீயரிங்கில் உள்ள அனைத்து கட்டுப்பாட்டு பொத்தான்களும் முடிவடையும் வரை 1/3 படிகளை வரிசையில் மீண்டும் செய்யவும்.
  4. இந்த செயல்பாட்டின் செயல்பாட்டு நிலைமைகள்:
  5. பஸ் அல்லாத கட்டுப்பாட்டுக்கான அசல் ஸ்டீயரிங்
  6.  அசல் காரின் ஸ்டீயரிங் சாவி தொகுதியாக இருக்க வேண்டும்tagமின் உள்ளீடு கட்டுப்பாட்டு முறை

ஒளிர்வு அமைப்பு

மதிப்பை சரிசெய்ய "+" - "" ஐகானைக் கிளிக் செய்யவும்

தொகுதி அமைப்பு

மல்டிமீடியா தொகுதி மற்றும் ப்ளூடூத் வால்யூமை தனித்தனியாக சரிசெய்ய "+" - "ஐகானை கிளிக் செய்யவும்.

  1. ஒலி அமைப்புகள்
  2. பாஸ், பாஸ், பாரிட்டோன், ட்ரெபிள் ஆகியவற்றை சரிசெய்ய ஸ்லைடரை கிளிக் செய்யவும்
  3. ராக்/கஸ்டம்/கிளாசிக்/ஜாஸ்/ப்ராப்பில் அமைக்க தொடர்புடைய ஐகானைக் கிளிக் செய்யவும்
  4. ஸ்பீக்கரின் நிலையை சரிசெய்ய மேல், கீழ், இடது, வலது அல்லது மையப் புள்ளியைக் கிளிக் செய்யவும்.
  5.  கணினி இயல்புநிலைக்கு ஒலி அமைப்புகள் அளவுருக்களை மீட்டமைக்க "இயல்புநிலை" ஐகானைக் கிளிக் செய்யவும்

புளூடூத்

ப்ளூடூத் இணைப்பில் நுழைய பிரதான இடைமுகத்தில் "ப்ளூடூத்" என்பதைக் கிளிக் செய்யவும்.
புளூடூத் அல்லாத இணைப்பு: உள்ளீடு புளூடூத் இடைமுகம், ப்ளூடூத் இணைப்பைக் காட்டாதே, ப்ளூடூத் இணைப்பைச் செய்யவும்

கண்ணாடி இணைப்பு என்பது ஒரு புதிய வகை மென்பொருள். இது ஒரே நேரத்தில் மொபைல் போனுடன் ஒன்றோடொன்று இணைக்கப்படலாம். மொபைல் போனில் மென்பொருளைப் பதிவிறக்க க்யூஆர் குறியீட்டை ஸ்கேன் செய்து படத் தூண்டுதலின் படி பயன்படுத்தவும்.
முதலில், ஆண்ட்ராய்டு போன் அமைப்புகளில் நுழைகிறது, “டெவலப்பர் விருப்பங்கள்”, வெவ்வேறு தொலைபேசிகள், அவற்றின் இருப்பிடம் ஒன்றல்ல, சில மொபைல் போன்கள்
இது மறைக்கப்பட்டுள்ளது, நீங்கள் "மொபைல் போனைப் பற்றி" உள்ளிட்டு "பதிப்பு எண்" ஐ 5 முறைக்கு மேல் கிளிக் செய்ய வேண்டும், அது தோன்றும் "நீங்கள் ஏற்கனவே இருக்கிறீர்கள்
டெவலப்பர் பயன்முறையில், நீங்கள் இதை செய்யத் தேவையில்லை ”
படி 2: "டெவலப்பர் விருப்பங்கள்" உள்ளிட்ட பிறகு, "டெவலப்பர் விருப்பங்கள்" சுவிட்ச் மற்றும் "USB பிழைத்திருத்த" சுவிட்சைத் திறக்கவும்
மூன்றாவது படி: கண்ணாடி இணைப்பு ஏபிபியைத் திறக்கவும், மொபைல் போன் ஏபிபியைப் பதிவிறக்க க்யூஆர் குறியீட்டை ஸ்கேன் செய்கிறது.
படி 4: மொபைல் போன் டேட்டா கேபிளை சாதாரண பயன்பாட்டிற்கு USB USB இயந்திரத்துடன் இணைக்க முடியும்.
ஆப்பிள் மொபைல் போன் ஒரு ஹாட்ஸ்பாட்டை திறக்கிறது மற்றும் இயந்திரம் மொபைல் போன் ஹாட்ஸ்பாட் சிக்னலுடன் இணைகிறது.

லோகோ அமைப்பு

கார் அமைப்புகளைக் கிளிக் செய்யவும், கார் லோகோ அமைப்புகளைத் தேர்ந்தெடுக்கவும், உள்ளமைக்கப்பட்ட லோகோ உங்களுடன் பொருந்தக்கூடிய மாதிரியைத் தேர்ந்தெடுத்து லோகோ உறுதிப்படுத்தலை அமைக்கத் தொடங்குகிறது.

தொழிற்சாலை அமைப்பு

கடவுச்சொல் "8888" அளவுரு அமைப்பு

கார் வழிசெலுத்தல் நெறிமுறை பெட்டி என்பது ஓட்டுநர் கணினி மற்றும் வழிசெலுத்தல் ஆகியவற்றுக்கு இடையேயான தகவல் தொடர்பை உணர தரவு வெளியீட்டிற்கு பயன்படுத்தப்படும் ஊடுருவல் வால் கோட்டுடன் இணைக்கப்பட்ட ஒரு சதுர பெட்டி ஆகும். அதிக காரில் அதிகம் பயன்படுத்தப்படுகிறது, அசல் காரின் ஏர் கண்டிஷனிங் டிஸ்ப்ளே, ஸ்டீயர் என்ஜி வீல் கண்ட்ரோல், கதவு திறக்கும் தகவல் மற்றும் பிற செயல்பாடுகளை டிகோடிங் செய்கிறது.ஆண்ட்ராய்டு கார் வழிசெலுத்தல் - 3

  1. தரை கம்பி (கருப்பு)
  2. +12v பேட்டரி (மஞ்சள்)
  3. +12VAcc சுவிட்ச் (சிவப்பு)
  4. சிறிய எல்amp சோதனை (ஆரஞ்சு-சிவப்பு)
  5. பார்க்கிங் சென்சார் கட்டுப்பாட்டு கம்பிகள் (பழுப்பு)
  6. ஸ்டீயரிங் விசை கட்டுப்பாட்டு கம்பிகள் (பச்சை மற்றும் வெள்ளை)
  7. ஸ்டீயரிங் விசை கட்டுப்பாட்டு கம்பிகள் (இளஞ்சிவப்பு)
  8. ரேடியோ ஆண்டெனா மின்சாரம் (நீலம்)
  9. முன் வலது - பேச்சாளர் (சாம்பல்/கருப்பு)
  10. பின்புறம் இடது - பேச்சாளர் (பச்சை/கருப்பு)
  11. முன் வலது + பேச்சாளர் (சாம்பல்)
  12. பின்புறம் + பேச்சாளர் (பச்சை)
  13. முன் இடது - பேச்சாளர் (வெள்ளை/கருப்பு)
  14. பின்புற வலது + ஸ்பீக்கர் (வயலட்)
  15. முன் இடது + பேச்சாளர் (வெள்ளை)
  16. 16. பின் வலது - பேச்சாளர் (வயலட்/கருப்பு)

ஆண்ட்ராய்டு கார் வழிசெலுத்தல் -

உங்கள் ஆதரவுக்கு நன்றி.

இந்த கையேட்டின் இறுதி விளக்கத்தின் உரிமையை நிறுவனம் பாதுகாத்துள்ளது. பயன்படுத்துவதற்காக. கணினி சரியாக, தயவுசெய்து இந்த கையேட்டைப் படித்து, பயன்படுத்துவதற்கு முன்பு சரியாக வைக்கவும்.

அடிக்கடி கேட்கப்படும் கேள்விகள்

இது Mercedes E350 2006க்கு பொருந்துமா?

ஆம்.

இது 2009 ஃபோக்ஸ்வேகன் ஜெட்டாவிற்கு பொருந்துமா? நிறுவல் கருவி சேர்க்கப்பட்டுள்ளதா?

உங்கள் காரில் இரட்டை DIN திறப்பு இருந்தால், A6G2A7PF, யுனிவர்சல் டபுள் டிஐஎன் ஆண்ட்ராய்டு கார் ஸ்டீரியோவாக, 2009 ஃபோக்ஸ்வேகன் ஜெட்டா காருக்குப் பொருந்தும்.
நிறுவலை முடிக்க உங்களுக்கு பொருத்தமான டாஷ் கிட் மற்றும் வயரிங் சேணம் (அல்லது சில சந்தர்ப்பங்களில், ஒரு CANBUS தரவு இடைமுகம்) தேவைப்படலாம். உங்கள் வாகனத்திற்கு குறிப்பிட்ட நிறுவல் கிட் கிடைக்கிறதா என்பதை முதலில் ஆன்லைன் அல்லது உள்ளூர் சப்ளையர்களிடம் சரிபார்க்கவும்.
எங்களின் ஒரு-நிறுத்த தீர்வு S8VW114SD (B09VKSDTKB) வாங்க பரிந்துரைக்கிறோம். இது எங்களின் S8 ஃபிளாக்ஷிப் தொடரில் இருந்து, மிகப் பெரிய திரையைக் கொண்டுள்ளது, மேலும் உங்கள் வாகனத்தின் OEM-பாணி தோற்றத்தை வைத்திருக்கும்.
உங்களிடம் ஏதேனும் கேள்விகள் இருந்தால் அல்லது கூடுதல் உதவி தேவைப்பட்டால், தயவுசெய்து எங்களுக்கு {support@myatoto.com} இல் மின்னஞ்சல் அனுப்பவும். எங்கள் ஆதரவுக் குழு உங்களுக்கு விரிவான பதில்களையும் தகவல்களையும் வழங்குவதில் மகிழ்ச்சியடையும்.

இது 2001 bmw 325ciக்கு பொருந்துமா?

எந்த இரட்டை டின்

உள் சேமிப்பகம் விரிவாக்கக்கூடியதா அல்லது யூஎஸ்பி மீடியா பிளேபேக்கிற்கு மட்டும்தானா?

உள் எண். வெளிப்புற ஆம்.

புளூடூத் மூலம் CarPlay உடன் இணைப்பது எப்படி?

வயர்லெஸ் ஆப்பிள் கார்ப்ளேவை இணைக்க நீங்கள் உண்மையில் புளூடூத்தை பயன்படுத்துவதில்லை. “கார் லிங்க் 2.0” ஐகானைக் கிளிக் செய்யவும்... அது சிவப்பு நிறமாகவும், ஃபோன் மற்றும் கேபிள் மூலம் இணைக்கப்பட்ட திரையைப் போலவும் தெரிகிறது. வயர்லெஸ் Apple CarPlayக்கு யூனிட் பயன்படுத்தும் ஆப்ஸ் இதுதான்.

தொழிற்சாலை கேமரா இந்த ரேடியோவை இணைக்குமா?

இணைப்பு பொருத்தம் மற்றும் சமிக்ஞை ஒரே மாதிரியாக இருக்கும் வரை.

இது 2010 Ford E தொடரில் பொருந்துமா?

உங்கள் காரில் இரட்டை DIN திறப்பு இருந்தால், A6G2A7PF, யுனிவர்சல் டபுள் டிஐஎன் ஆண்ட்ராய்டு கார் ஸ்டீரியோவாக, உங்கள் காரின் 2010 ஃபோர்டு இ சீரிஸுக்குப் பொருந்தும்.
நிறுவலை முடிக்க உங்களுக்கு பொருத்தமான டாஷ் கிட் மற்றும் வயரிங் சேணம் (அல்லது சில சந்தர்ப்பங்களில், ஒரு CANBUS தரவு இடைமுகம்) தேவைப்படலாம். உங்கள் வாகனத்திற்கு குறிப்பிட்ட நிறுவல் கிட் கிடைக்கிறதா என்பதை முதலில் ஆன்லைன் அல்லது உள்ளூர் சப்ளையர்களிடம் சரிபார்க்கவும்.
உங்களிடம் ஏதேனும் கேள்விகள் இருந்தால் அல்லது கூடுதல் உதவி தேவைப்பட்டால், தயவுசெய்து எங்களுக்கு {support@myatoto.com} இல் மின்னஞ்சல் அனுப்பவும். எங்கள் ஆதரவுக் குழு உங்களுக்கு விரிவான பதில்களையும் தகவல்களையும் வழங்குவதில் மகிழ்ச்சியடையும். 

வயர்லெஸ் ஆப்பிள் கார்பிளேயுடன் இணைக்க எவ்வளவு நேரம் ஆகும்? அது எப்போதாவது இணைப்பை துண்டிக்கிறதா?

ஸ்டீரியோவில் கார்ப்ளேயுடன் உங்கள் ஃபோனை எப்போது இணைக்கிறீர்கள் என்பது உங்கள் கேள்வியாக இருந்தால், நீங்கள் காரை இயக்கும் ஒவ்வொரு முறையும் அது தானாகவே செய்யும்

கோடுக்குள் செல்லும் அலகு பரிமாணங்கள் என்ன?

கோடுக்குள் செல்லும் A6G2A7PF இன் பகுதி 178 மிமீ (அகலம்) x 100 மிமீ (உயரம்) அளவிடும். இது ISO தரமான இரட்டை DIN அளவு. ஆழம் 102 மிமீ.
உங்களிடம் ஏதேனும் கேள்விகள் இருந்தால் அல்லது கூடுதல் உதவி தேவைப்பட்டால், தயவுசெய்து எங்களுக்கு {support@myatoto.com} இல் மின்னஞ்சல் அனுப்பவும். எங்கள் ஆதரவுக் குழு உங்களுக்கு விரிவான பதில்களையும் தகவல்களையும் வழங்குவதில் மகிழ்ச்சியடையும். 

இது 2010 gmc sierra 2500hdக்கு பொருந்துமா?

 உங்கள் காரில் இரட்டை DIN திறப்பு இருந்தால், A6G2A7PF, உலகளாவிய இரட்டை DIN ஆண்ட்ராய்டு கார் ஸ்டீரியோவாக, உங்கள் காருக்கு 2010 gmc sierra 2500hd பொருந்தும்.
நிறுவலை முடிக்க உங்களுக்கு பொருத்தமான டாஷ் கிட் மற்றும் வயரிங் சேணம் (அல்லது சில சந்தர்ப்பங்களில், ஒரு CANBUS தரவு இடைமுகம்) தேவைப்படலாம். உங்கள் வாகனத்திற்கு குறிப்பிட்ட நிறுவல் கிட் கிடைக்கிறதா என்பதை முதலில் ஆன்லைன் அல்லது உள்ளூர் சப்ளையர்களிடம் சரிபார்க்கவும்.
உங்களிடம் ஏதேனும் கேள்விகள் இருந்தால் அல்லது கூடுதல் உதவி தேவைப்பட்டால், தயவுசெய்து எங்களுக்கு {support@myatoto.com} இல் மின்னஞ்சல் அனுப்பவும். எங்கள் ஆதரவுக் குழு உங்களுக்கு விரிவான பதில்களையும் தகவல்களையும் வழங்குவதில் மகிழ்ச்சியடையும். 

சரி இந்த பொருத்தம் டொயோட்டா ch_r?

இது எனது 2009 டொயோட்டா டகோமாவில் நன்றாகப் பொருந்துகிறது

பின்புற ஸ்பீக்கர்களில் யாருக்காவது சிக்கல் உள்ளதா? கம்பி நிறங்களை நான் இருமுறை சரிபார்த்தேன், அவை சரியானதா?

உங்கள் ஸ்பீக்கர்களை சரிபார்க்கவும், கதவு உடைந்ததால் எனது கம்பிகள் உடைந்துள்ளன

இந்த யூனிட்டில் உள்ளமைக்கப்பட்ட ஜிபிஎஸ் உள்ளதா?

ஆம், இதில் உள்ளமைக்கப்பட்ட ஜிபிஎஸ் உள்ளது.

இந்த யூனிட் புளூடூத்தை ஆதரிக்கிறதா?

ஆம், இது புளூடூத்தை ஆதரிக்கிறது.

இந்த யூனிட் RDS ஐ ஆதரிக்கிறதா?

ஆம், இது RDS ஐ ஆதரிக்கிறது.

இந்த யூனிட் USB ஐ ஆதரிக்கிறதா?

ஆம், இது USB ஐ ஆதரிக்கிறது.

யூ.எஸ்.பி மூலம் வீடியோவை இயக்க முடியுமா?

ஆம், ஃபோன்கள் அல்லது பிற ஆண்ட்ராய்டு சாதனங்களுக்கு லேபிளிடப்படாத யூ.எஸ்.பி கேபிளைப் பயன்படுத்தவும். கேபிள் டேட்டா அல்லது அதற்கு நெருக்கமான ஒன்று என லேபிளிடப்பட்டுள்ளது.

வீடியோ

ஆண்ட்ராய்டு-லோகோ

www.android.com

ஆவணங்கள் / ஆதாரங்கள்

PDF thumbnailAndroid கார் வழிசெலுத்தல்
User Manual · Android, Car Navigation

குறிப்புகள்

கேள்விகள் மற்றும் பதில்கள்

Helpful product questions tied to this manual. Each item links to the full Q&A page.

கேள்விகள் & பதில்கள்

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. BMW 318I e46 டச் கன்ட்ரோல் ஸ்விட்ச் வேலை செய்யவில்லை மற்றும் ஸ்டீயரிங் வேலை செய்யவில்லை என்றால், ஸ்டீயரிங் அறிவுறுத்தலுக்கு ஏற்கனவே உதவி தேவைப்பட்ட பிறகு நான் ஏதாவது செட்-அப் செய்ய வேண்டுமா?

  2. Radio android k2001n does not give sound… I already checked the cables and harnesses, all are connected correctly…
    Radio android k2001n no da sonido… Ya revise los cables y los arnés todos están conectados correctamente…

    Diego asks <em>Radio android k2001n does not give sound... I already checked the cables and harnesses, all are connected correctly...<e/em>
    Radio android k2001n no da sonido... Ya revise los cables y los arnés todos están conectados correctamente...
    Manuals+ clarified question
    கேள்வி

    Why is there no sound on my Android K2001N car navigation unit even though the cables are connected correctly?

    பதில்

    If your Android K2001N unit has no sound despite correct wiring, please check the following software and system settings based on the manual:

    • ஒலி அமைப்புகள்: Navigate to the Sound Settings menu. Ensure the multimedia volume is not muted. You can also try clicking the இயல்புநிலை icon to restore sound parameters to system defaults, which can resolve issues caused by incorrect equalizer or speaker position settings.
    • Original Car Power Ampஆயுள்: Check the "Original car power amplifier settings" in the Quick Operation menu. If your vehicle has a factory-installed amplifier, the unit may need to be configured to trigger it correctly.
    • தொழிற்சாலை மீட்டமைப்பு: If settings appear correct, you can attempt to restore the unit to factory defaults. Go to System Settings > System Information மற்றும் கிளிக் செய்யவும் இயல்புநிலை அமைப்புகள்.
    • Factory Settings Menu: Some advanced audio protocols are hidden in the Factory Settings (Password: 8888). Check if the "Car navigation protocol box" (CANBUS) settings match your vehicle, as this box often decodes audio signals for high-end car systems.
    • Wiring Re-verification: இருமுறை சரிபார்க்கவும் நீலம் wire (Radio antenna/Amplifier power supply). If this is not providing power to your car's factory amplifier, you will get no sound even if the speaker wires are correct.

  3. I have an android radio k2001n does not give sound… The cables and harness are correctly connected… Solution please
    Tengo un radio android k2001n no da sonido.. Los cables y arnés están correctamente conectados… Solución x favor

    Diego asks <em>I have an android radio k2001n does not give sound... The cables and harness are correctly connected... Solution please<e/em>
    Tengo un radio android k2001n no da sonido.. Los cables y arnés están correctamente conectados... Solución x favor
    Manuals+ clarified question
    கேள்வி

    How do I fix a lack of sound on my K2001N Android car radio when cables are correctly connected?

    பதில்

    If your K2001N Android radio has no sound despite correct wiring, please check the following settings and hardware configurations based on the manual:

    • Ampலைஃபையர் அமைப்புகள்: Access the main interface and check the அசல் கார் சக்தி ampலைஃபையர் அமைப்புகள். If your vehicle has a factory amplifier, the unit must be configured to trigger it correctly.
    • ஒலி அமைப்புகள்: செல்லுங்கள் ஒலி அமைப்புகள் menu. Ensure the multimedia and Bluetooth volumes are not muted. You can also try clicking the இயல்புநிலை icon to restore sound parameters to system defaults.
    • தொழிற்சாலை அமைப்புகள்: Some audio protocols require specific configuration in the தொழிற்சாலை அமைப்புகள் (கடவுச்சொல்: 8888). Check if the correct CANBUS protocol is selected for your vehicle model, as this often controls audio signal routing.
    • Wiring Verification: Even if the harness appears correct, verify the நீலம் wire (Radio antenna/Amplifier power supply). If this is not connected or powered, an external factory amplifier will not turn on, resulting in no sound.
    • Mute/System Status: Swipe down from the top of the screen to check the notification bar and ensure the system is not in a global 'Mute' or 'Silent' mode.

  4. When the screen is turned on it turns on in night mode, as it would return to day mode
    Cuando se enciende la pantalla se enciende en modo nocturno, como volvería a modo de día

    Florencio asks <em>When the screen is turned on it turns on in night mode, as it would return to day mode<e/em>
    Cuando se enciende la pantalla se enciende en modo nocturno, como volvería a modo de día
    Manuals+ clarified question
    கேள்வி

    How do I change the screen from night mode back to day mode?

    பதில்

    To adjust the screen brightness and switch between day and night modes on your Android Car Navigation system, follow these steps:

    • ஒளிர்வு அமைப்புகள்: செல்லுங்கள் ஒளிர்வு அமைப்பு menu. You can use the "+" மற்றும் "-" icons to manually adjust the brightness value to your preference.
    • Illumination Wire: Note that many Android head units automatically switch to night mode when the vehicle's headlights are turned on (via the orange/red 'Little lamp test' wire). If your screen is stuck in night mode, check if your headlights are on or if the wiring is triggering the dimming function.
    • கணினி அமைப்புகள்: You can also check under கணினி அமைப்புகள் or Android அமைப்புகள் for a specific "Display" or "Night Mode" toggle to set it to 'Always Day' or 'Automatic'.

    If the screen is unresponsive or the colors are distorted, you may need to perform a screen calibration by pressing the screen with five fingers for a few seconds until the calibration interface appears, then following the numbered prompts (1, 2, 3, 4).

  5. How can I turn off the color change on the Android system car player itself
    Hoe kan ik de kleurenverandering uitzetten op het Android system car player zelf

    Maaike v d ven asks <em>How can I turn off the color change on the Android system car player itself<e/em>
    Hoe kan ik de kleurenverandering uitzetten op het Android system car player zelf
    Manuals+ clarified question
    கேள்வி

    How can I turn off the color change on the Android car navigation system?

    பதில்

    To stop the color change on your Android car navigation system, you need to access the Touch button learn settings. Follow these steps based on the manual:

    • செல்லுங்கள் Touch button learn section in your system settings.
    • The manual describes a process where you can set specific colors for the buttons. To stop a cycle or change, you typically need to manually select a single color and confirm it.
    • The manual states: "The first step is to start learning the yellow color, click the power letter to change the yellow color... finally, click the close position to confirm and the setting is successful."
    • If your device has a specific "LED" or "Element" app in the app drawer, check there for a "Static" color mode or a toggle to turn off "Auto Change" or "Rainbow" effects.

    Note: Because many generic Android head units have slightly different software interfaces, if you do not see these options, look for தொழிற்சாலை அமைப்புகள் (often requires password 8888) and check for "Key Light" or "Illumination" settings to lock the color.

  6. I bought a CHICK PX6 12.8 inch radio also known as KLYDE KD 12.8 inch screen.
    The packaging only came with a limited manual, where only the functions are mentioned, what it can do, but it does not tell you how to do the settings.
    உதாரணமாகample, I do not read how to save the pre-select channels and I do not read what prog. I need to use on my phone to control the radio remotely, how to split the screen etc.
    Does anyone know where I can download a detailed manual for this radio?
    Ik heb een CHICK PX6 12,8 inch radio gekocht ook bekend als KLYDE KD-12,8 inch scherm.
    Bij de verpakking zat alleen maar een beperkte handleiding, waar alleen maar de functies benoemd worden wat hij allemaal kan, maar er wordt niet verteld hoe je de instellingen moet doen.
    Zo lees ik niet hoe ik de pre-select kanalen kan opslaan en lees ik niet wat voor prog. ik op mijn telefoon moet gebruiken om de radio op afstand te kunnen bedienen, hoe ik het scherm kan splitsen enz.
    Is er misschien iemand die weet waar ik een uitgebreide handleiding van deze radio kan downloaden.

    Walther Woortman asks <em>I bought a CHICK PX6 12.8 inch radio also known as KLYDE KD 12.8 inch screen.
    The packaging only came with a limited manual, where only the functions are mentioned, what it can do, but it does not tell you how to do the settings.
    உதாரணமாகample, I do not read how to save the pre-select channels and I do not read what prog. I need to use on my phone to control the radio remotely, how to split the screen etc.
    Does anyone know where I can download a detailed manual for this radio?<e/em>
    Ik heb een CHICK PX6 12,8 inch radio gekocht ook bekend als KLYDE KD-12,8 inch scherm.
    Bij de verpakking zat alleen maar een beperkte handleiding, waar alleen maar de functies benoemd worden wat hij allemaal kan, maar er wordt niet verteld hoe je de instellingen moet doen.
    Zo lees ik niet hoe ik de pre-select kanalen kan opslaan en lees ik niet wat voor prog. ik op mijn telefoon moet gebruiken om de radio op afstand te kunnen bedienen, hoe ik het scherm kan splitsen enz.
    Is er misschien iemand die weet waar ik een uitgebreide handleiding van deze radio kan downloaden.
    Manuals+ clarified question
    கேள்வி

    How do I save radio channels, use remote control apps, and split the screen on a CHICK PX6 / KLYDE KD 12.8 inch Android car navigation system?

    பதில்

    While the specific manual for the 12.8-inch CHICK PX6 / KLYDE KD is not directly attached, most Android-based car navigation systems share a common interface. Based on the general Android Car Navigation manual, here are the steps for your requested settings:

    • Saving Radio Channels: Open the "Local Radio" interface. Perform an automatic search or manually find a station. To save it as a preset (pre-select), long-press one of the numbered slots or the collection icon (often a star or a specific storage location on the screen) until the frequency is saved.
    • Remote Control via Phone: This is typically handled through the கண்ணாடி இணைப்பு or எளிதான இணைப்பு app. You must enable "Developer Options" and "USB Debugging" on your Android phone, then connect via USB or Hotspot. For modern units, look for an app named "ZLink" or "CarLink" to use Android Auto/CarPlay for remote control.
    • பிளவு திரை: On most Android head units, you can activate split-screen by tapping the "Recent Apps" (square) button in the top status bar or navigation bar. Long-press the icon of the first app you want to use and drag it to the side of the screen, then select the second app. Note that not all apps support split-screen mode.

    If these steps do not match your interface, you can try searching the Manuals+ ஆழமான தேடல் for "KLYDE KD" or "PX6 Android Radio" to find a more detailed PDF version.

  7. Manuel is found that I want to setup my anroid car tape.

    Ashok Gavankar asks Manuel is found that I want to setup my anroid car tape.
    Manuals+ clarified question
    கேள்வி

    How do I set up my Android car navigation system?

    பதில்

    To set up your Android car navigation system, follow these primary steps based on the user manual:

    • வைஃபை இணைப்பு: Swipe down from the top of the screen to access the notification shade. Click on the Wi-Fi icon to select your network and enter the password.
    • புளூடூத் இணைத்தல்: Open the Bluetooth interface on the unit. If not connected, it will prompt you to pair. தேடுங்கள் the device name on your phone and enter the password (often 0000 or 1234) to enable hands-free calling and music.
    • ஸ்டீயரிங் வீல் கட்டுப்பாட்டு கற்றல்: Go to the steering wheel learning interface. Press a physical button on your steering wheel, then select the corresponding function icon on the screen. Repeat for all buttons and click 'Confirm' or 'Close' to save.
    • திரை அளவுத்திருத்தம்: If the touch response is inaccurate, press five fingers on the screen for several seconds until the calibration interface appears. Follow the numbered prompts (1, 2, 3, 4) to calibrate.
    • கண்ணாடி இணைப்பு: To sync your phone, enable USB பிழைத்திருத்தம் in your phone's 'Developer Options'. Connect via a USB data cable and use the pre-installed Mirror Link app (you may need to scan a QR code on the screen to download the mobile version).
    • தொழிற்சாலை அமைப்புகள்: If you need to access advanced parameters or reset the unit, the factory setting password is typically 8888.

    Note: Always ensure the engine is running when using the system for extended periods to avoid draining your car battery.

  8. good afternoon I have an android 10 radio for an opel insignia year 201 van, but 3 days ago it stopped memorizing my radio stations and also my screen background images.. does anyone know how I can solve the problem? every time i start the van i have to memorize everything again and every time i turn it off nothing is memorized.
    boa tarde tenho um radio android 10 para uma carrinha opel insignia ano 201, mas ha 3 dias deixou de memorizar as minhas estaçoes de radio e tambem as minhas imagens de fundo da tela.. alguem sabe como posso resolver o problema? sempre que ligo a carrinha tenho que memorizar tudo de novo e sempre que a desligo nada fica memorizado.

    ferreira asks <em>good afternoon I have an android 10 radio for an opel insignia year 201 van, but 3 days ago it stopped memorizing my radio stations and also my screen background images.. does anyone know how I can solve the problem? every time i start the van i have to memorize everything again and every time i turn it off nothing is memorized.<e/em>
    boa tarde tenho um radio android 10 para uma carrinha opel insignia ano 201, mas ha 3 dias deixou de memorizar as minhas estaçoes de radio e tambem as minhas imagens de fundo da tela.. alguem sabe como posso resolver o problema? sempre que ligo a carrinha tenho que memorizar tudo de novo e sempre que a desligo nada fica memorizado.
    Manuals+ clarified question
    கேள்வி

    Why is my Android car radio not saving radio stations and background images after the car is turned off?

    பதில்

    The issue of your Android car navigation system not memorizing radio stations or background images is typically related to the wiring of the constant power supply. For the unit to retain memory, it requires a continuous 12V power source even when the ignition is off.

    Please check the following based on the wiring diagram provided in the manual:

    • Yellow Wire (+12V Battery): This wire must be connected to a constant 12V power source (always live). If this is connected to an ignition-switched source, the unit will lose all memory every time you turn off the van.
    • Red Wire (+12V ACC): This should be connected to the ignition switch so the unit turns on and off with the vehicle.
    • Wiring Swap: In many European vehicles like the Opel Insignia, the positions of the constant (Yellow) and switched (Red) power wires in the factory harness are often reversed. Try swapping the Red and Yellow wire connections to see if memory is retained.

    If the wiring is correct, you can also try a factory reset by going to System Settings > System Information > Default Settings to rule out a software glitch, though this is less likely to be the cause than the physical power connection.

  9. why can’t I download w/o a ton of B>S>

    Just asks why can't I download w/o a ton of B>S>
    Manuals+ clarified question
    கேள்வி

    How can I download the manual without encountering excessive advertisements or obstacles?

    பதில்

    Manuals.plus provides the full content of the ஆண்ட்ராய்டு கார் வழிசெலுத்தல் பயனர் கையேடு நேரடியாக webpage for free viewing without requiring a download. You can read all instructions, including wiring diagrams and setup steps, by scrolling through the post.

    If you specifically need a PDF copy for offline use, please note the following:

    • நேரடி Viewing: Most users find it easiest to use the on-page text and images, which include detailed sections on ஸ்டீயரிங் வீல் கற்றல், புளூடூத் இணைப்பு, மற்றும் கண்ணாடி இணைப்பு.
    • Browser Print: You can often save the page as a PDF using your browser's "Print" function (Ctrl+P or Cmd+P) and selecting "Save as PDF" to bypass third-party download links.
    • அதிகாரப்பூர்வ ஆதரவு: If you are looking for a specific manufacturer's firmware or digital manual (such as for ATOTO units mentioned in the context), you can contact their support directly at support@myatoto.com.
  10. This thing is a POS. Radio sometimes works and then it doesn’t. Can’t figure out how to make the equalizer work. My truch stock mic’s for the phone system are muffled. No installation instruction. User manual is very vague. Wished I never purchased.

    கென் Weber asks This thing is a POS. Radio sometimes works and then it doesn't. Can't figure out how to make the equalizer work. My truch stock mic's for the phone system are muffled. No installation instruction. User manual is very vague. Wished I never purchased.
    Manuals+ clarified question
    கேள்வி

    How do I use the equalizer, fix muffled microphone audio, and find installation instructions for my Android car navigation system?

    பதில்

    Based on the manual for the Android Car Navigation system, here are the steps to address your concerns:

    • சமநிலை மற்றும் ஒலி அமைப்புகள்: To access the equalizer, go to ஒலி அமைப்புகள். You can adjust the bass, baritone, and treble using the sliders. You can also select preset profiles such as Rock, Classic, Jazz, or Pop by clicking their respective icons. To adjust the speaker balance, click the directional arrows or the center point on the speaker position interface.
    • மைக்ரோஃபோன் சிக்கல்கள்: If your truck's stock microphones are muffled, ensure the unit is correctly configured for external audio. Note that many aftermarket Android units require a specific adapter or wiring configuration to utilize factory (OEM) microphones. If the audio remains muffled, check the புளூடூத் அமைப்புகள் to ensure the gain is not set too high, or consider using the unit's built-in microphone if available.
    • நிறுவல் வழிமுறைகள்: While the manual is primarily a user guide, it provides a basic wiring diagram for the 16-pin connector:
      • கருப்பு: தரையில் கம்பி
      • மஞ்சள்: +12V பேட்டரி
      • சிவப்பு: +12V ACC Switch
      • Orange-red: சிறிய எல்amp சோதனை
      • பழுப்பு: Parking sensor control
      • நீலம்: Radio antenna power
      • Gray/White/Green/Violet pairs: Speaker outputs (Front Right, Front Left, Rear Left, Rear Right)

    If your specific model is an ATOTO A6 Performance (as suggested by some context), you can reach out to their support team at support@myatoto.com for vehicle-specific dash kits and wiring harnesses.

  11. Thank you very much for the instruction. I couldn’t cope with the mirror image, I was looking on various forums and here please:
    five fingers are enough to enter screen calibration.
    Thank you again. Regards
    Bardzo dziękuję za instrukcję. Nie mogłem sobie poradzić z lustrzanym odbiciem, szukałem na różnych forach a tutaj proszę:
    wystarczy pięć palców i wchodzisz w kalibrację ekranu.
    Jeszcze raz dziękuję. Pozdrawiam

    Jaroslaw Cerowski asks <em>Thank you very much for the instruction. I couldn't cope with the mirror image, I was looking on various forums and here please:
    five fingers are enough to enter screen calibration.
    Thank you again. Regards<e/em>
    Bardzo dziękuję za instrukcję. Nie mogłem sobie poradzić z lustrzanym odbiciem, szukałem na różnych forach a tutaj proszę:
    wystarczy pięć palców i wchodzisz w kalibrację ekranu.
    Jeszcze raz dziękuję. Pozdrawiam
    Manuals+ clarified question
    கேள்வி

    How do I calibrate the screen on an Android car navigation system to fix a mirror image issue?

    பதில்

    To fix a mirror image or calibrate the screen on your Android car navigation unit, you can use the following gesture:

    • Five-Finger Calibration: Press and hold five fingers on the screen for a few seconds. This should trigger the calibration interface.
    • அளவுத்திருத்த படிகள்: Once the calibration screen appears, follow the on-screen prompts (usually clicking numbered points like 1, 2, 3, and 4) to align the touch coordinates.

    If you need to access these settings through the menu, navigate to கணினி அமைப்புகள் > திரை to find the calibration interface. For units with a "Mirror Link" feature, ensure your phone's developer options and USB debugging are correctly configured if the mirroring issue persists during mobile interconnection.

  12. il mio con il tasto di spegnimento si disattiva l’audio, come si può cambiare?

    Fabio asks il mio con il tasto di spegnimento si disattiva l'audio, come si può cambiare?
    Manuals+ clarified question
    கேள்வி

    How can I change the power button function so it doesn't just mute the audio?

    பதில்

    To change or reassign the behavior of your device's buttons, you can use the Touch button learn feature found in the system settings. Follow these steps to recalibrate or change button functions:

    • அளவுத்திருத்த பயன்முறையை உள்ளிடவும்: Press and hold five fingers on the screen for a few seconds until the calibration interface appears.
    • Clear Existing Memory: Use the "Clear the key to memory" option if you need to start over.
    • Assign the Power Button:
      1. கிளிக் செய்யவும் சக்தி letter/icon on the screen; it should turn yellow.
      2. Press the physical power button on your unit's light board/panel.
      3. The yellow highlight should disappear, indicating the coordinate has been learned.
    • உறுதிப்படுத்தவும்: கிளிக் செய்யவும் மூடு or உறுதிப்படுத்தவும் position on the screen to save the successful setting.

    If your unit uses steering wheel controls for power/mute, you can similarly adjust these under ஸ்டீயரிங் கற்றல் in the settings menu by pressing the steering wheel button and then selecting the desired function on the screen.

  13. MY RADIO DOES NOT LOAD KNOWN RADIO PRINTERS
    O MEU RADIO NAO CARREGA IMISSORAS DE RADIO CONHECIDAS

    FERNANDO asks <em>MY RADIO DOES NOT LOAD KNOWN RADIO PRINTERS<e/em>
    O MEU RADIO NAO CARREGA IMISSORAS DE RADIO CONHECIDAS
    Manuals+ clarified question
    கேள்வி

    Why is my radio not loading or finding known radio stations?

    பதில்

    If your Android Car Navigation system is not loading or finding known radio stations, you can try the following steps based on the manual:

    • Perform an Automatic Search: Enter the "Local Radio" interface and click the icon to clear all stored radio records and perform a fresh automatic search. This can help the unit re-identify available signals.
    • Adjust Search Sensitivity: In the radio interface, you can select the automatic search lock sensitivity between வலுவான மற்றும் நடுத்தர. If it is set to Strong, it may skip stations with weaker signals.
    • Check the Antenna Connection: Ensure the radio antenna is properly connected to the back of the unit. According to the wiring diagram, the நீல கம்பி is typically designated for the radio antenna power supply.
    • ஸ்விட்ச் பேண்டுகள்: Use the "Browse" or "Band" function to ensure you are searching in the correct FM or AM band for your desired stations.

    If the issue persists after an automatic search, verify that the antenna is not damaged and that the ground wire (Black) is securely connected to prevent interference.

  14. My car toyota logo cannot be set

    Joseph Owusu Ansah asks My car toyota logo cannot be set
    Manuals+ clarified question
    கேள்வி

    How do I set the Toyota car logo on my Android Car Navigation system?

    பதில்

    To set the Toyota logo on your Android Car Navigation system, follow these steps based on the user manual:

    1. செல்க கார் அமைப்புகள் முக்கிய இடைமுகத்தில்.
    2. தேர்ந்தெடு Car Logo Settings.
    3. Browse the built-in logos and select the டொயோட்டா model that matches your vehicle.
    4. Confirm your selection to set the logo as the boot image.

    If these options are protected by a password, the manual indicates the default factory setting password is 8888.

  15. My vehicle is a 2012 Ford F-150. The soft buttons on the front of the radio not working. During the learning it wouldn’t change from yellow to blue, stay on the screen, to save changes. Can’t add new settings to the stirring wheel buttons. Please help.

    Dennis Huggins asks My vehicle is a 2012 Ford F-150. The soft buttons on the front of the radio not working. During the learning it wouldn’t change from yellow to blue, stay on the screen, to save changes. Can’t add new settings to the stirring wheel buttons. Please help.
    Manuals+ clarified question
    கேள்வி

    How do I fix soft buttons not working and steering wheel button learning issues on my Android car navigation system?

    பதில்

    Based on the manual for the Android Car Navigation system, here are the steps to resolve issues with button learning and steering wheel controls:

    1. Screen Calibration (Soft Buttons)

    If the soft buttons on the front of the radio are unresponsive or not saving changes, you may need to recalibrate the touch coordinates:

    • Press and hold the screen with five fingers for a few seconds until the calibration interface pops up.
    • Follow the numbered prompts (1, 2, 3, 4) to set the button coordinates.
    • To learn the specific touch buttons: Start the learning process (the text will turn yellow), click the corresponding function (like Power), and then touch the physical/soft button location on the unit. Once the color changes or the coordinate is set, click 'Close' or 'Confirm' to save.

    2. ஸ்டீயரிங் வீல் கற்றல்

    For your 2012 Ford F-150, ensure the following conditions are met for steering wheel learning to work:

    • இணக்கத்தன்மை: This function only works for original steering wheels using voltage input control (non-CANBUS/non-bus control). If your vehicle uses a CANBUS decoder box, the learning interface may not be used; instead, the functions are pre-defined by the protocol box settings.
    • கற்றல் படிகள்:
      1. Press and hold the physical button on your steering wheel first.
      2. While holding the button, click the corresponding function icon on the Android screen.
      3. Repeat this for each button.
      4. Ensure you click the 'Save' or 'Confirm' button on the screen before exiting to ensure the yellow status changes and settings are stored.

    If the buttons still do not change from yellow to blue (indicating a successful save), double-check that the 'Key 1' or 'Key 2' wires (usually Pink and Green/White) are correctly connected to your vehicle's steering wheel control wiring harness.

  16. hi I have this android car radio it has a black rear subwoofer output, I have connected to the amp but can’t get sub to work. everything else works sub works tested else were. just wanted to see if there is any sub settings or something else

    Angelo Sklavos asks hi I have this android car radio it has a black rear subwoofer output, I have connected to the amp but can't get sub to work. everything else works sub works tested else were. just wanted to see if there is any sub settings or something else
    Manuals+ clarified question
    கேள்வி

    How do I troubleshoot the subwoofer output on my Android car radio?

    பதில்

    To troubleshoot your subwoofer output on an Android car navigation unit, please check the following settings and connections:

    • ஒலி அமைப்புகள்: Navigate to the main interface and select ஒலி அமைப்புகள். Ensure the bass levels are adjusted and that any specific subwoofer controls (if available in your software version) are enabled.
    • Ampலைஃபையர் அமைப்புகள்: சரிபார்க்கவும் அசல் கார் சக்தி ampலைஃபையர் அமைப்புகள் in the quick operation menu (accessible by swiping down from the top of the screen). Some units require the amplifier control wire to be triggered to activate the sub-out.
    • வயரிங் சரிபார்ப்பு: என்பதை சரிபார்க்கவும் நீலம் wire (Radio antenna/Amplifier power supply) is correctly connected to your amplifier's remote turn-on lead. If the amplifier does not receive this signal, it will not power the subwoofer even if the RCA cables are connected.
    • தொழிற்சாலை அமைப்புகள்: If the option is hidden, you may need to enter the தொழிற்சாலை அமைப்புகள் (often protected by password 8888) to see if there is a toggle to enable the Subwoofer RCA output.

    If these steps do not resolve the issue, ensure the black RCA output is firmly seated and that the audio source being played actually contains a dedicated LFE (Low-Frequency Effects) channel.

  17. Hello, I would like to know how to adjust the volume when you turn on the car radio brand CAR NAVIGATION ENTERTAINMENT SYSTEM THANK YOU
    Buongiorno desidero sapere come regolare il volume quando accendi l’auto radio marca CAR NAVIGATION ENTERTAINMENT SYSTEM GRAZIE

    Vito Francesco Nettis asks <em>Hello, I would like to know how to adjust the volume when you turn on the car radio brand CAR NAVIGATION ENTERTAINMENT SYSTEM THANK YOU
    Buongiorno desidero sapere come regolare il volume quando accendi l’auto radio marca CAR NAVIGATION ENTERTAINMENT SYSTEM GRAZIE
    Manuals+ clarified question
    கேள்வி

    How do I adjust the volume on my Android car navigation system?

    பதில்

    To adjust the volume on your Android car navigation system, follow these steps based on the manual:

    • Multimedia and Bluetooth Volume: செல்லுங்கள் தொகுதி அமைப்பு menu. You can use the "+" மற்றும் "-" icons to adjust the multimedia volume and Bluetooth volume independently.
    • Sound Equalization: இல் ஒலி அமைப்புகள் menu, you can use sliders to adjust the bass, baritone, and treble. You can also select preset sound profiles such as Rock, Classic, Jazz, or Custom.
    • பேச்சாளர் இருப்பு: Within the sound settings, you can click on the top, bottom, left, right, or center points of the speaker diagram to adjust the audio position (fader/balance) within the vehicle.
    • தொழிற்சாலை இயல்புநிலைகள்: If you need to reset your audio levels, click the "Default" icon to restore the sound parameters to system factory settings.

    If your device has physical buttons or a touch-sensitive panel on the side, you may also find dedicated volume keys there. If you are specifically looking to set a default startup volume, this is often found under தொழிற்சாலை அமைப்புகள் (Password: 8888) or கணினி அமைப்புகள், though use caution when modifying factory parameters.

  18. *please sumone help me before I rip this thing out of my dash an smash it on the sidewalk sumhow my kid managed to get into screen calibration mode an really messed it up an now the screen is useless cuz it’s hard to find out where u hav to touch it to make do anything so please help

    Brian Berg asks *please sumone help me before I rip this thing out of my dash an smash it on the sidewalk sumhow my kid managed to get into screen calibration mode an really messed it up an now the screen is useless cuz it’s hard to find out where u hav to touch it to make do anything so please help
    Manuals+ clarified question
    கேள்வி

    How do I calibrate the screen on my Android car navigation system?

    பதில்

    To fix a misaligned or non-responsive touch screen on your Android car navigation system, you can enter the screen calibration mode using a specific touch gesture. Follow these steps:

    • Five-Finger Gesture: Press and hold five fingers of your palm onto the screen for a few seconds. This should trigger the calibration interface to pop up.
    • அளவுத்திருத்த புள்ளிகள்: Once the calibration screen appears, you will see numbered points (1, 2, 3, 4). Click them in the specific order shown to set the coordinates.
    • Button Learning: If the system prompts for button learning (often indicated by a yellow color), click the corresponding function (like the power button) and then the specific coordinate on the screen to confirm.
    • சேமிக்க மற்றும் வெளியேறும்: After completing the sequence for all points/colors, click the "close" or "confirm" position to save the settings.

    If you are unable to trigger this mode because the screen is too far out of alignment, you can also try navigating to கணினி அமைப்புகள் > திரை to find the calibration interface manually, or use the இயல்புநிலை அமைப்புகள் option to restore factory defaults.

  19. காலை வணக்கம்,
    the radio station is not displayed on the dashboard of my AUDI A4 1.9 TDI 2006 car. Is this normal or is there something missing in the connection?
    போஞ்சோர்,
    la station radio ne s’affiche pas sur le tableau de bord de ma voiture AUDI A4 1.9 TDI 2006. C’est normal ou il manque quelque chose dans le branchement ?

    THABET FETHI MOUNIR asks <em>Good morning,
    the radio station is not displayed on the dashboard of my AUDI A4 1.9 TDI 2006 car. Is this normal or is there something missing in the connection?
    போஞ்சோர்,
    la station radio ne s'affiche pas sur le tableau de bord de ma voiture AUDI A4 1.9 TDI 2006. C'est normal ou il manque quelque chose dans le branchement ?
    Manuals+ clarified question
    கேள்வி

    Why is the radio station not displayed on my Audi A4 2006 dashboard after installing an Android navigation system?

    பதில்

    The issue you are experiencing with the radio station not displaying on your Audi A4 dashboard (the Driver Information System or DIS) is common when replacing an original factory head unit with an aftermarket Android system. Here are the primary reasons and potential solutions:

    • CANBUS Decoder: Most Android navigation systems require a specific CANBUS protocol box (a small square box connected to the wiring harness) to communicate with the car's computer. This box is responsible for sending data like radio stations, door status, and air conditioning info to the dashboard. Ensure this box is connected and that the correct "Car Model" or "Protocol" is selected in the தொழிற்சாலை அமைப்புகள் (usually under password 8888).
    • வயரிங் இணக்கத்தன்மை: Aftermarket units often do not support the proprietary Audi protocol required to send text data to the dashboard display. While the unit will function and play music, the dashboard display may remain blank or only show "Audio" or "Track" instead of specific station names.
    • Protocol Settings: செல்க கணினி அமைப்புகள் > தொழிற்சாலை அமைப்புகள் (கடவுச்சொல்: 8888) > நெறிமுறை அமைப்புகள். Ensure you have selected the correct manufacturer (e.g., Raise, Simple Soft) and the specific Audi A4 model to enable data communication.

    If the CANBUS box is missing or the software protocol does not support DIS integration, the dashboard display will unfortunately not show the radio station information.

  20. Do you know why to makes an alert (bing noise) when I lift my foot off the brake pedal and makes a random ringing noise as I am driving?

    Jamie Donnachie asks Do you know why to makes an alert (bing noise) when I lift my foot off the brake pedal and makes a random ringing noise as I am driving?
    Manuals+ clarified question
    கேள்வி

    Why does my Android car navigation make an alert noise when I lift my foot off the brake or random ringing noises while driving?

    பதில்

    Based on the manual for the Android Car Navigation system, these audio alerts are likely related to safety features or wiring configurations. Here are the most probable causes:

    • Parking Sensor/Brake Control: The unit has a specific wire for Parking sensor control (brown). If this is connected to your brake light circuit or if the system is configured to alert when the parking brake is engaged/disengaged, it may trigger a "bing" noise when you lift your foot off the pedal.
    • Driving Safety Alerts: The manual explicitly states: "To ensure safe driving and avoid illegal traffic regulations, do not watch programs or operate the unit while driving." Many of these units have a built-in software alert that triggers a sound if it detects the vehicle is in motion while certain apps (like video) are active.
    • Network/App Notifications: Random ringing or "bing" noises are often caused by Network News or உலாவி notifications if the device is connected to Wi-Fi or a mobile hotspot. You can check this by pulling down the status bar to view தி அறிவிப்பு panel and clearing any active alerts.
    • Steering Wheel Control Interference: என்றால் ஸ்டீயரிங் கற்றல் was not completed correctly or if there is a voltage fluctuation in the steering wheel key control wires (Green/White or Pink), the system may misinterpret electrical noise as a button press, causing a feedback beep.

    To troubleshoot, try disabling notifications in the Android settings or checking the wiring of the brown 'Parking' wire to ensure it is not triggering incorrectly.

  21. PLEASE TELL ME HOW WE CAN ENLARGE THE PRINT ON OUR NEW UNIT….WE CANNOT MAKE POUT THE LETTERS WHEN TRYING TO INPUT AN ADDRESS FOR THE GPS….THANK YOU!!!

    MO asks PLEASE TELL ME HOW WE CAN ENLARGE THE PRINT ON OUR NEW UNIT....WE CANNOT MAKE POUT THE LETTERS WHEN TRYING TO INPUT AN ADDRESS FOR THE GPS....THANK YOU!!!
    Manuals+ clarified question
    கேள்வி

    How can I enlarge the font size on my Android car navigation unit?

    பதில்

    To enlarge the print or font size on your Android car navigation unit, you will need to access the standard Android system settings rather than the specific car-interface settings. Follow these steps:

    • செல்லவும் முதன்மை இடைமுகம் மற்றும் தேர்ந்தெடுக்கவும் Android அமைப்புகள் (அல்லது Set on the machine).
    • Look for a section labeled காட்சி or அணுகல்.
    • Within those menus, look for எழுத்துரு அளவு or காட்சி அளவு.
    • Adjust the slider to increase the text size to your preference.

    If your specific unit has a custom interface that hides these options, you may need to enable டெவலப்பர் விருப்பங்கள் first. To do this, go to சாதனம் பற்றி மற்றும் தட்டவும் பதிப்பு எண் (or Build Number) 5 or more times until a message appears saying you are in developer mode. You can then check the Developer Options menu for further display scaling settings.

    குறிப்பு: If the GPS application itself has small text, check the settings within that specific app (e.g., Google Maps or the built-in Navigation app) for "Map Scale" or "Text Size" options.

  22. How can I change the ring tone ?

    James Gaenslen asks How can I change the ring tone ?
    Manuals+ clarified question
    கேள்வி

    How can I change the ringtone on my Android car navigation system?

    பதில்

    Based on the provided manual for the Android Car Navigation system, there are no specific instructions for changing the ringtone file itself. However, you can manage the volume settings for Bluetooth calls separately from other media.

    To adjust Bluetooth volume settings:

    1. செல்க கணினி அமைப்புகள்.
    2. தேர்ந்தெடு தொகுதி அமைப்பு.
    3. கிளிக் செய்யவும் "+" or "-" icons to adjust the புளூடூத் தொகுதி independently from the multimedia volume.

    If you are looking to change the actual sound file, this is typically handled through the புளூடூத் menu or the general Android அமைப்புகள் (found by swiping down the notification shade and clicking the gear icon), though specific ringtone selection is not detailed in this manual. If your device is an ATOTO model, you may also check the ஒலி அமைப்புகள் to adjust the 32-band EQ and other audio preferences.

  23. The audio is not heard and it does not recognize a micro SD card.
    MY IPHONE IS THE 14 pro MODEL. They have system software update. Where can I do the update?
    No se escucha el audio y no reconoce tarjeta micro SD.
    MI IPHONE ES EL MODELO 14 pro. cuentan con actualizacion de software del sistema. Donde puedo hacer la actualizacion

    Alberto asks <em>The audio is not heard and it does not recognize a micro SD card.
    MY IPHONE IS THE 14 pro MODEL. They have system software update. Where can I do the update?
    No se escucha el audio y no reconoce tarjeta micro SD.
    MI IPHONE ES EL MODELO 14 pro. cuentan con actualizacion de software del sistema. Donde puedo hacer la actualizacion
    Manuals+ clarified question
    கேள்வி

    How do I troubleshoot audio and SD card issues on my Android car navigation system, and where can I find system software updates?

    பதில்

    Based on the Android Car Navigation User Manual, here are the steps to address your issues:

    • ஆடியோ சிக்கல்கள்: செல்க கணினி அமைப்புகள் > ஒலி அமைப்புகள். Ensure the multimedia and Bluetooth volumes are not muted. You can also click the இயல்புநிலை icon to restore sound parameters to system defaults. If you are using an external ampலைஃபையர், சரிபார்க்கவும் அசல் கார் சக்தி ampலைஃபையர் அமைப்புகள் in the quick operation menu.
    • SD Card Recognition: The manual notes that media functions (Local Music/Video) are only effective when the machine has an SD card or USB interface with compatible files. Ensure the card is properly inserted and contains supported formats like RMVB, FLV, 3GP, or 1080p HD video.
    • System Software Updates: To update the navigation unit, go to கணினி அமைப்புகள் > கணினி தகவல். There you will find options for Android upgrade (to the highest Android version) and MCU மேம்படுத்தல் (for the system software).

    Note: Regarding your iPhone 14 Pro, if you are looking to update the phone itself, that must be done through the iPhone's own settings (Settings > General > Software Update). For connecting it to the car unit, use the கண்ணாடி இணைப்பு or கார்ப்ளே (often via the "Car Link" app) as described in the manual.

  24. Hello, question: when I connect my android or apple cell phone to the stereo, only the front speakers are heard, I put the radio on and all the speakers are heard. What can be?
    Hola, consulta: cuando conecto al stereo mi celular android o apple solo se escuchan las bocinas de enfrente, pongo el radio y se escuchan todas las bocinas. Que puede ser?

    Cesar asks <em>Hello, question: when I connect my android or apple cell phone to the stereo, only the front speakers are heard, I put the radio on and all the speakers are heard. What can be?
    Hola, consulta: cuando conecto al stereo mi celular android o apple solo se escuchan las bocinas de enfrente, pongo el radio y se escuchan todas las bocinas. Que puede ser?
    Manuals+ clarified question
    கேள்வி

    Why does audio only play through the front speakers when a phone is connected, but all speakers work with the radio?

    பதில்

    This issue is typically related to the ஒலி அமைப்புகள் or ஃபேடர்/இருப்பு configuration specifically for multimedia/Bluetooth sources, which are often handled separately from the radio source. Follow these steps to troubleshoot:

    • Check Sound Field/Position Settings: செல்லுங்கள் ஒலி அமைப்புகள் menu. Look for the speaker position diagram. Ensure the focus point is set to the center of the vehicle. If it is shifted entirely to the front, the rear speakers will be muted for that specific source.
    • Adjust Multimedia Volume: இல் தொகுதி அமைப்புகள், ensure that the multimedia and Bluetooth volumes are not restricted. Some units have independent gain settings for different inputs.
    • Check Wiring/Amplifier Configuration: If your car uses an external amplifier, ensure the "Original car power amplifier settings" are correctly configured in the system menu. If the unit is only sending a two-channel signal during phone playback, the amplifier may not be distributing it to the rear speakers unless a "surround" or "fill" mode is active.
    • Reset Audio Parameters: கிளிக் செய்யவும் இயல்புநிலை icon within the Sound Settings to restore all parameters to system defaults, which often resolves source-specific routing issues.
    • Verify Connection Type: If using a physical AUX connection, ensure the cable is fully seated and is a stereo cable (TRS), as a mono or poorly seated cable can cause loss of channels.

  25. Need information on setting up the harness to a Honda Accord 2013.

    Wilfredo Roldan asks Need information on setting up the harness to a Honda Accord 2013.
    Manuals+ clarified question
    கேள்வி

    How do I set up the wiring harness for an Android navigation system in a 2013 Honda Accord?

    பதில்

    Setting up the harness for a 2013 Honda Accord typically requires a vehicle-specific wiring adapter and potentially a CANBUS decoder to retain factory functions like steering wheel controls and climate displays. While the manual provides a general pinout, you should follow these steps for your specific vehicle:

    • Identify the Wires: According to the manual, the standard 16-pin harness uses these primary connections:
      • மஞ்சள்: +12V Battery (Constant power)
      • சிவப்பு: +12V ACC (Ignition switch)
      • கருப்பு: தரையில் கம்பி
      • ஆரஞ்சு/சிவப்பு: Illumination/Small lamp சோதனை
      • பழுப்பு: Parking/Reverse sensor control
      • Pink/Green & White: Steering wheel key control
    • CANBUS Box: For a 2013 Honda Accord, you likely need a Protocol Box (CANBUS). This is a small square box that connects to the navigation tail line. It decodes data from the car's computer to enable steering wheel controls and door opening information.
    • Steering Wheel Learning: Once the harness is connected, go to Settings > Steering Wheel Learning. Press a button on your steering wheel, then select the corresponding function on the screen to map the controls.
    • நிறுவல் கிட்: Because the 2013 Accord has a unique dashboard layout, you will likely need a double-DIN dash kit specifically designed for that model year to ensure a proper fit.

    Note: If your Accord has a factory premium sound system or navigation, you may need a specialized harness that includes RCA outputs to interface with the factory ampஆயுள்.

  26. The retractable screen did not come back and I want it to restart from the factory to solve the problem as I do, thank you.
    la pantalla retractil no volvió a salir y quiero que se inicie de fabrica nuevamente para solucionar el problema como le hago gracias.

    Félix AndreS Benavides asks <em>The retractable screen did not come back and I want it to restart from the factory to solve the problem as I do, thank you.
    la pantalla retractil no volvió a salir y quiero que se inicie de fabrica nuevamente para solucionar el problema como le hago gracias.
    Manuals+ clarified question
    கேள்வி

    How do I perform a factory reset on my Android car navigation system to fix a retractable screen issue?

    பதில்

    To perform a factory reset on your Android car navigation system, follow these steps based on the user manual:

    • செல்லுங்கள் கணினி அமைப்புகள் மெனு.
    • தேடுங்கள் கணினி தகவல்.
    • கிளிக் செய்யவும் இயல்புநிலை அமைப்புகள் to restore the unit to factory settings.

    If you are looking for advanced factory settings (parameter settings), the manual mentions a password: 8888.

    குறிப்பு: If the screen is physically stuck and does not retract or deploy, a software reset may not solve the problem if there is a mechanical failure. Ensure there are no obstructions and that the unit is receiving stable 12V power. If the screen remains unresponsive after a reset, professional repair may be required as per the manual's safety precautions.

ஒரு கேள்வி கேள்

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.