Vivitar V-4000 35mm SLR Camera Instruction Manual

அறிமுகம்

The Vivitar V-4000 is a manual single-lens reflex (SLR) camera designed for photographers who prefer direct control over their camera settings. This kit includes a 35-70mm zoom lens, providing versatility for various photographic situations. The V-4000 focuses on essential photographic functions, allowing users to develop a fundamental understanding of photography principles.

Key features of the Vivitar V-4000 include:

• பிரகாசமான viewfinder with split-image focusing and a three-LED display for exposure guidance.
• Hot shoe with X-contact for flash photography, synchronized at 1/125 second or slower.
• Film speed range from ISO 25 to 3200.
• Accurate center-weighted, Through-The-Lens (TTL) metering system.
• Integrated self-timer function.
• Accepts Pentax K mount lenses, offering compatibility with a wide range of optics.

அமைவு

1. பேட்டரி நிறுவல்

The Vivitar V-4000 requires two 1.5-volt alkaline (LR44) or silver oxide (SR44) batteries for operation. These batteries power the camera's light meter and LED display.

1. Locate the battery compartment, typically on the bottom or side of the camera body.
2. பெட்டியின் மூடியைத் திறக்கவும்.
3. Insert the two batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. பேட்டரி பெட்டியின் அட்டையை பாதுகாப்பாக மூடு.

2. லென்ஸ் இணைப்பு

The camera features a quick-release K-type bayonet mount for attaching and detaching lenses.

1. Align the red dot or indicator on the lens barrel with the corresponding red dot or indicator on the camera's lens mount.
2. Insert the lens into the camera mount.
3. Rotate the lens clockwise (when viewed from the front) until it clicks into place, indicating it is securely locked.
4. To detach the lens, press the lens release button on the camera body and rotate the lens counter-clockwise.

Figure 1: Vivitar V-4000 camera with the 35-70mm lens mounted.

3. திரைப்படத்தை ஏற்றுதல்

The Vivitar V-4000 uses standard 35mm film. Ensure the film speed (ISO) dial on the camera matches the ISO rating of your film.

1. பிலிம் ரிவைண்ட் குமிழியை மேலே இழுப்பதன் மூலம் கேமராவைத் திறக்கவும்.
2. Place the film cartridge into the film chamber.
3. Pull the film leader across to the take-up spool and insert it into one of the slots.
4. Advance the film slightly using the film advance lever to ensure it catches on the take-up spool's teeth.
5. கேமராவை மீண்டும் உறுதியாக மூடு.
6. Advance the film two frames, pressing the shutter release button each time, to ensure the film is properly loaded and to reach the first unexposed frame. The film rewind knob should rotate as you advance the film, indicating proper loading.
7. Set the ISO dial on the camera to match the film's ISO rating.

இயக்க வழிமுறைகள்

1. கவனம் செலுத்துதல்

The 35-70mm lens features manual focus. Use the bright viewfinder with its split-image focusing aid for precise focus.

1. மூலம் பாருங்கள் viewகண்டுபிடிப்பாளர்.
2. Rotate the focusing ring on the lens until the image in the split-image circle within the viewfinder appears sharp and aligned.
3. For subjects outside the split-image area, use the microprism collar or the surrounding matte screen to achieve sharp focus.

படம் 2: முன் view of the 35-70mm lens, showing focusing and aperture controls.

2. Setting Exposure (Shutter Speed and Aperture)

The V-4000 utilizes a manual, center-weighted TTL metering system. You must manually set both the shutter speed and aperture.

1. ஷட்டர் வேகம்: Rotate the shutter speed dial on the top of the camera to select a desired speed (from Bulb to 1/2000 second).
2. துளை: Rotate the aperture ring on the lens to select the desired f-stop (e.g., f/3.5 to f/4.8 on the included lens).
3. அளவீடு: Half-press the shutter button to activate the light meter. LEDs in the viewfinder will indicate if the exposure is correct (green), overexposed (red +), or underexposed (red -). Adjust shutter speed or aperture until the green LED illuminates.

Figure 3: Top controls of the Vivitar V-4000, including the shutter speed dial.

3. படம் எடுப்பது

1. மூலம் உங்கள் ஷாட்டை வடிவமைக்கவும் viewகண்டுபிடிப்பாளர்.
2. Focus the lens manually.
3. Set the appropriate shutter speed and aperture based on the light meter reading.
4. Gently press the shutter release button completely to take the picture.
5. Advance the film using the film advance lever to prepare for the next shot.

4. Using the Self-Timer

The self-timer allows for a delayed shutter release, useful for self-portraits or group photos where the photographer wants to be in the shot.

1. Compose and focus your shot.
2. Engage the self-timer lever (location may vary, typically on the front of the camera body).
3. Press the shutter release button. The self-timer mechanism will begin its countdown, and the shutter will fire after approximately 10 seconds.

5. ஃபிளாஷ் புகைப்படம் எடுத்தல்

The V-4000 is equipped with a hot shoe for external flash units. The flash synchronization speed is 1/125 second or slower.

1. Mount a compatible external flash unit onto the camera's hot shoe.
2. Set the camera's shutter speed to 1/125 second or slower.
3. Adjust the flash and camera aperture settings according to the flash unit's instructions or guide number.
4. Take the picture as usual.

6. ரீவைண்டிங் பிலிம்

Once all frames on the film roll have been exposed, the film must be rewound back into its cartridge before opening the camera back.

1. Press the film rewind release button, usually located on the bottom of the camera.
2. பிலிம் ரிவைண்ட் குமிழியில் உள்ள கிராங்கை மடித்து, பதற்றம் விடுபடுவதை உணரும் வரை அதை கடிகார திசையில் திருப்பவும், இது பிலிம் முழுவதுமாக கார்ட்ரிட்ஜுக்குள் திரும்பியிருப்பதைக் குறிக்கிறது.
3. Pull up the film rewind knob to open the camera back.
4. Remove the film cartridge for processing.

படம் 4: பின்புறம் view of the Vivitar V-4000 camera.

பராமரிப்பு

Proper care and maintenance will ensure the longevity and optimal performance of your Vivitar V-4000 camera.

• லென்ஸை சுத்தம் செய்தல்: Use a soft, lint-free cloth and a specialized lens cleaning solution to gently wipe the lens surfaces. Avoid touching the lens glass with your fingers. Use a blower brush to remove dust particles.
• கேமரா உடலை சுத்தம் செய்தல்: கேமரா உடலை மென்மையான, உலர்ந்த துணியால் துடைக்கவும். பிடிவாதமான அழுக்குக்கு, சிறிது தண்ணீர் ஊற்றவும்.amp துணியைப் பயன்படுத்தலாம், ஆனால் கேமராவின் உள் கூறுகளுக்குள் ஈரப்பதம் நுழையாமல் பார்த்துக் கொள்ளுங்கள்.
• சேமிப்பு: Store the camera in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
• பாதிப்பைத் தவிர்க்க: Protect the camera from drops and impacts, which can damage internal mechanisms and optical components.

சரிசெய்தல்

விவரக்குறிப்புகள்

உத்தரவாதம் மற்றும் ஆதரவு

Information regarding specific warranty terms or direct customer support contacts for the Vivitar V-4000 camera is not available in the provided product data. Please refer to the original packaging or contact your retailer for details on warranty coverage and support options.