தயாரிப்பு முடிந்துவிட்டதுview
The G96 1055P Complete Triple-Action Gun Treatment is an advanced firearm maintenance solution designed to perform three essential functions: cleaning, lubricating, and protecting. This single product eliminates the need for separate solvents and preservatives, streamlining the maintenance process.
It is formulated to remove rust, gunpowder residue, leading, and corrosion quickly. The lubricant properties ensure smooth operation of moving parts, even in extreme temperatures as low as -50°F (-45°C), without freezing, oxidizing, or evaporating. Furthermore, it leaves an invisible magnetic film on metal surfaces, providing long-lasting protection against rust and corrosion.
Image: G96 1055P Complete Triple-Action Gun Treatment in a yellow, black, and red spray can. The label indicates "complete GUN TREATMENT" and "does all three: Cleans, Lubricates, Protects" with "triple action" below.
பாதுகாப்பு தகவல்
WARNING: FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. CONTENTS UNDER PRESSURE.
Always read and follow all safety warnings and instructions on the product label before use. Use in a well-ventilated area. Keep out of reach of children. Avoid contact with eyes and prolonged skin contact. In case of ingestion, seek immediate medical attention. Do not puncture or incinerate container. Store in a cool, dry place away from direct sunlight and heat sources.
அமைப்பு மற்றும் தயாரிப்பு
Before applying G96 1055P Complete Triple-Action Gun Treatment, ensure your firearm is unloaded and safe. Always follow proper firearm safety procedures.
- Ensure Firearm is Unloaded: Verify that the firearm is completely unloaded and the chamber is clear.
- பாதுகாப்பு உபகரணங்களை அணியுங்கள்: It is recommended to wear safety glasses and gloves to prevent accidental contact.
- பணியிடத்தை தயார் செய்யவும்: Work in a well-ventilated area, preferably outdoors or in a garage with open doors. Lay down a protective mat or old newspapers to catch any overspray or residue.
- Shake Can Thoroughly: Shake the G96 can well before each use to ensure proper mixing of components.
Operating Instructions (Application)
G96 1055P is designed for comprehensive firearm maintenance. It cleans, lubricates, and protects in one step.
General Application for Cleaning and Protection:
- Disassemble Firearm: For thorough cleaning, disassemble your firearm according to the manufacturer's instructions.
- Apply to Components: Spray G96 1055P directly onto all metal components, including the barrel, action, and moving parts. Ensure adequate coverage to allow the product to penetrate and dissolve residue.
- Allow to Penetrate: Let the product sit for a few minutes to allow it to break down carbon, lead, and rust. For heavily fouled areas, allow more time.
- Brush and Wipe: Use a bore brush for the barrel and appropriate cleaning brushes for other components to remove loosened residue. Wipe all surfaces clean with a lint-free cloth or patch. Repeat if necessary until surfaces are clean.
- Reassemble and Lightly Coat: Reassemble the firearm. Apply a light, even coat of G96 1055P to all metal surfaces, inside and out, for lubrication and protection. Wipe off any excess. The product leaves an invisible protective film.
Specific Benefits:
- Rust and Residue Removal: Effectively removes rust, gunpowder, leading, and corrosion.
- உயவு: Lubricants will not freeze, oxidize, or evaporate, ensuring smooth operation of firing pins and all moving parts even in temperatures as low as -50°F (-45°C).
- பாதுகாப்பு: Leaves an invisible magnetic film that protects the gun from rust and corrosion without leaving a gummy residue.
பராமரிப்பு மற்றும் சேமிப்பு
Regular application of G96 1055P will maintain your firearm in optimal condition.
- வழக்கமான சுத்தம்: Apply G96 1055P after each use of the firearm to prevent buildup of residue and ensure continuous protection.
- நீண்ட கால சேமிப்பு: For firearms intended for long-term storage, apply a slightly heavier, but still even, coat of G96 1055P to all metal surfaces. Store firearms in a cool, dry environment, ideally in a gun safe or cabinet.
- கலப்பதைத் தவிர்க்கவும்: While G96 1055P is a complete treatment, avoid mixing it with other gun oils or solvents unless specifically recommended, as this may reduce its effectiveness.
சரிசெய்தல்
Most issues related to firearm function after using G96 1055P are due to improper application or pre-existing conditions.
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Residue remains after cleaning | Insufficient dwell time; heavy fouling; inadequate brushing. | Apply more product, allow longer penetration time (5-10 minutes), and use appropriate brushes for scrubbing. Repeat cleaning process. |
| Gummy residue observed | Excessive application; mixing with incompatible products. | Wipe off excess product thoroughly. Ensure only a light, even coat remains. Avoid mixing with other lubricants or solvents. |
| Firearm action feels stiff | Insufficient lubrication on moving parts; cold temperatures affecting other lubricants. | Ensure all moving parts are lightly coated with G96 1055P. This product is designed to perform in low temperatures. If other lubricants were used, clean thoroughly and reapply G96 1055P. |
விவரக்குறிப்புகள்
| பண்பு | விவரம் |
|---|---|
| தயாரிப்பு பெயர் | G96 Complete Triple-Action Gun Treatment |
| மாதிரி எண் | 1055P |
| பிராண்ட் | G96 |
| செயல்பாடுகள் | Cleans, Lubricates, Protects (CLP) |
| வெப்பநிலை வரம்பு | Effective down to -50°F (-45°C) |
| உருவாக்கம் | Non-gummy, non-evaporating, non-oxidizing |
| நிகர எடை | 12 அவுன்ஸ் (340.2 கிராம்) |
| UPC | 029841105538 |
உத்தரவாதம் மற்றும் ஆதரவு
Specific warranty information for the G96 1055P Complete Triple-Action Gun Treatment is typically provided by the retailer or manufacturer at the time of purchase. Please refer to your purchase documentation or the official G96 webவிரிவான உத்தரவாத விதிமுறைகள் மற்றும் நிபந்தனைகளுக்கான தளம்.
For product support, technical inquiries, or safety data sheets, please contact G96 directly through their official customer service channels. Contact information can usually be found on the product packaging or the manufacturer's webதளம்.
