1. அறிமுகம்
The Nova IceProbe Thermoelectric Aquarium Chiller is designed to provide a reliable cooling solution for small aquariums. Utilizing advanced thermoelectric technology, this unit efficiently converts electricity into cooling power to maintain desired water temperatures. This manual provides essential information for the proper installation, operation, and maintenance of your IceProbe chiller.
2. பாதுகாப்பு தகவல்
- Always disconnect power before performing any maintenance or installation.
- மின்சாரம் வழங்கல் தொகுதியை உறுதி செய்யவும்tage matches the chiller's requirements (120V).
- Do not operate the chiller if the power cord or plug is damaged.
- Keep the chiller's fan area clear of obstructions to ensure proper airflow and prevent overheating.
- This device is intended for indoor use with aquariums only.
- A drip loop should be created for all power cords to prevent water from traveling along the cord and reaching electrical outlets.
3. தொகுப்பு உள்ளடக்கங்கள்
தொகுப்பைத் திறந்தவுடன், அனைத்து கூறுகளும் உள்ளனவா மற்றும் சேதமடையாமல் உள்ளதா என்பதைச் சரிபார்க்கவும்:
- Nova IceProbe Thermoelectric Aquarium Chiller unit
- Watertight securing nut
- Silicon washer
- Power cord (5' 9" length)
- Probe cord (6' length)
4. விவரக்குறிப்புகள்
| மாதிரி எண் | IPAC-50W-120V |
| Dimensions (Unit with probe) | 4" (W) x 4 3/4" (D) x 7 1/2" (H) |
| பவர் கார்டு நீளம் | 5' 9" |
| ஆய்வு தண்டு நீளம் | 6' |
| உற்பத்தியாளர் | NOVA TEC |
| பிறப்பிடமான நாடு | சீனா |
5. அமைவு வழிமுறைகள்
The IceProbe chiller is designed for easy integration into various aquarium setups, including siphon overflows, prefilters, sumps, or directly into plastic aquariums. Installation requires drilling a 1 1/4" hole.
- Prepare the Installation Location: Identify a suitable location for the chiller. This could be a bulkhead in a sump, an overflow box, or a drilled hole in a plastic aquarium wall. Ensure there is at least 3-1/8" minimum interior clearance for the cooling probe and 1" air circulation space around the exterior fan unit.
- துளை துளைக்கவும்: Carefully drill a 1 1/4" diameter hole at the chosen installation point. Ensure the hole is clean and free of debris.
- ஆய்வைச் செருகவும்: Insert the cooling probe through the drilled hole from the inside of the aquarium/sump.
- அலகைப் பாதுகாக்கவும்: Place the silicon washer over the probe on the exterior side of the aquarium/sump, followed by the watertight securing nut. Tighten the nut firmly by hand to create a secure, watertight seal. Do not overtighten.
- Position the Chiller: Ensure the exterior fan unit is positioned to allow for adequate airflow. The fan should not be obstructed.
- Connect to Temperature Controller: The IceProbe chiller does not have an integrated on/off switch or temperature controller. It provides continuous chilling when powered. To regulate the aquarium temperature, you வேண்டும் connect the chiller to a separate, external temperature controller (not included). This controller will turn the chiller on and off based on your set temperature parameters.
- மின் இணைப்பு: Once the chiller is securely installed and connected to a temperature controller, plug the temperature controller into a power outlet. Ensure a drip loop is formed with the power cord.
6. இயக்க வழிமுறைகள்
The IceProbe chiller operates continuously when powered. Its cooling function is managed by an external temperature controller. Follow these guidelines for optimal performance:
- வெப்பநிலை கட்டுப்பாடு: Set your desired temperature range on your external temperature controller. The controller will activate the chiller when the water temperature exceeds the upper limit and deactivate it when the temperature falls below the lower limit.
- குளிரூட்டும் திறன்: The cooling capacity of a single IceProbe unit varies with water volume and ambient air temperature. Refer to the "Typical Temperature Pulldown" chart below for estimated performance.
- பல அலகுகள்: For larger aquariums or greater temperature reduction, multiple IceProbe units can be used.
- காற்றோட்டம்: Ensure the fan on the exterior unit has unrestricted airflow. Blocked airflow will reduce cooling efficiency and may lead to overheating.
Typical Temperature Pulldown (°F)
| குளிரூட்டிகள் | கேலன் தண்ணீர் | ||
|---|---|---|---|
| 10 | 20 | 40 | |
| 1 | 6-8 | 3-4 | 1-2 |
| 2 | 10-12 | 6-8 | 3-4 |
Note: These values are approximate and can vary based on ambient room temperature, aquarium insulation, water circulation, and other environmental factors.
7. பராமரிப்பு
Regular maintenance ensures the longevity and efficient operation of your IceProbe chiller.
- மின்விசிறியை சுத்தம் செய்யவும்: Periodically inspect the fan on the exterior unit for dust and debris accumulation. Gently clean with a soft brush or compressed air to ensure optimal airflow.
- ஆய்வை ஆய்வு செய்யவும்: Check the cooling probe inside the aquarium for any algae or mineral buildup. Clean gently with a soft cloth or sponge if necessary.
- இணைப்புகளைச் சரிபார்க்கவும்: Ensure all electrical connections are secure and the watertight securing nut remains tight.
- நீர் தரம்: Maintaining good aquarium water quality will help prevent excessive buildup on the cooling probe.
8. சரிசெய்தல்
If you encounter issues with your IceProbe chiller, consider the following common troubleshooting steps:
- குளிர்விக்காத குளிர்விப்பான்:
- Verify the chiller is receiving power from the temperature controller.
- Check the temperature controller settings to ensure it is set to activate the chiller.
- Ensure the fan on the exterior unit is spinning and not obstructed.
- Confirm the cooling probe is submerged in water.
- Check for excessive dust or debris on the fan or cooling probe.
- போதுமான குளிர்ச்சி இல்லை:
- Ensure adequate air circulation around the exterior fan unit.
- Verify the aquarium size is within the recommended cooling capacity (refer to the "Typical Temperature Pulldown" chart). For larger tanks or greater temperature drops, consider adding a second IceProbe unit.
- Check ambient room temperature; higher room temperatures will reduce cooling efficiency.
- Ensure the cooling probe is clean and free of buildup.
- அசாதாரண சத்தம்:
- மின்விசிறியில் ஏதேனும் தடைகள் அல்லது தளர்வான கூறுகள் உள்ளதா எனப் பரிசோதிக்கவும்.
- Ensure the unit is securely mounted and not vibrating against other surfaces.
சரிசெய்தல் படிகள் சிக்கலை தீர்க்கவில்லை என்றால், வாடிக்கையாளர் ஆதரவைத் தொடர்பு கொள்ளவும்.
9. உத்தரவாதத் தகவல்
The Nova IceProbe Thermoelectric Aquarium Chiller unit comes with a one-year warranty against defects in materials and workmanship from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, neglect, improper installation, accidents, or unauthorized repairs.
உத்தரவாதக் கோரிக்கைகளுக்கு, உங்கள் வாங்கியதற்கான ஆதாரத்தைத் தக்கவைத்துக்கொண்டு வாடிக்கையாளர் ஆதரவைத் தொடர்பு கொள்ளவும்.
10. வாடிக்கையாளர் ஆதரவு
For technical assistance, troubleshooting guidance beyond this manual, or warranty inquiries, please contact NOVA TEC customer support. Refer to the manufacturer's webமிகவும் புதுப்பித்த தொடர்புத் தகவலுக்கான தளம் அல்லது தயாரிப்பு பேக்கேஜிங்.
உற்பத்தியாளர்: NOVA TEC
