அறிமுகம்
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator. Please read this manual thoroughly before using the product.
The Fenwick 20 is a pneumatic 20 oz sausage dispenser designed for consistent application. It features a lightweight design, an adjustable regulator, and a plunger system that provides consistent pressure on the material. Key components are manufactured in the U.K. and assembled in Michigan.
Image: The COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator, showing its main body, handle, and air inlet.
தயாரிப்பு அம்சங்கள்
- True adjustable air regulator: 125 PSI Maximum; 145 PSI Maximum Input.
- Floating plunger action with secure cord; Plunger Extension for reduced waste.
- Drawn aluminum barrel construction.
- Instant dump valve for quick pressure release.
- Series 3 Air System for efficient operation.
- Integrated silencer for reduced noise during operation.
- Quick release end cap for easy material loading and unloading.
- Rotating air hose connector for flexible movement.
- Includes six white cone nozzles for various application needs.
அமைவு வழிமுறைகள்
- பேக்கிங்: Carefully remove the applicator and all accessories from the packaging. Verify all components listed in the "Included Components" section are present.
- காற்று விநியோக இணைப்பு: Connect a compressed air hose (not included) to the rotating air hose connector at the base of the handle. Ensure the connection is secure and leak-free. The maximum input pressure is 145 PSI.
- Regulator Adjustment: The applicator features an adjustable air regulator. Before use, adjust the regulator to the desired operating pressure, typically between 0-125 PSI, depending on the material viscosity and desired flow rate.
- ஏற்றுதல் பொருள்:
- Unscrew the quick release end cap from the rear of the aluminum barrel.
- Insert the 20 oz (600 ml) sausage material into the barrel.
- Ensure the plunger system is retracted to allow for full insertion of the sausage.
- Replace and securely tighten the quick release end cap.
- முனை இணைப்பு: Select an appropriate white cone nozzle for your application and securely attach it to the front of the applicator barrel. Trim the nozzle tip to the desired bead size.
இயக்க வழிமுறைகள்
- பாதுகாப்பு முதலில்: Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the applicator. Ensure adequate ventilation in your workspace.
- Initiating Flow: Point the nozzle at a scrap surface. Gently press the trigger to begin material flow. Adjust the air regulator as needed to achieve a consistent and smooth bead.
- விண்ணப்பம்: Apply the material by moving the applicator smoothly along the desired path. Maintain consistent pressure on the trigger for an even bead.
- Stopping Flow: Release the trigger to stop material flow. The instant dump valve will release pressure, preventing material from continuing to dispense.
- Material Change/Removal: To change or remove material, ensure the air supply is disconnected. Unscrew the quick release end cap and carefully remove the sausage.
பராமரிப்பு
Regular maintenance ensures the longevity and optimal performance of your COX pneumatic applicator.
- சுத்தம்: After each use, especially when using fast-curing materials, clean any residual material from the nozzle and the inside of the barrel. Use appropriate solvents recommended by the material manufacturer.
- Plunger System: Periodically inspect the plunger and its cord for wear or damage. Ensure the plunger moves freely within the barrel.
- விமான இணைப்புகள்: Check all air connections and hoses regularly for leaks or damage. Replace worn seals or fittings as necessary.
- உயவு: Apply a small amount of pneumatic tool oil to the air inlet periodically to lubricate internal components and prevent corrosion.
- சேமிப்பு: Store the applicator in a clean, dry place away from extreme temperatures and direct sunlight. Disconnect from air supply before storage.
சரிசெய்தல்
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| No material flow or inconsistent flow |
|
|
| இணைப்புகளிலிருந்து காற்று கசிவு |
|
|
| Material continues to flow after trigger release |
|
|
விவரக்குறிப்புகள்
| பண்பு | விவரம் |
|---|---|
| மாதிரி எண் | 63006-600 Fenwick 600 ml. |
| OEM பகுதி எண் | Fenwick 20 |
| பிராண்ட் | COX |
| திறன் | 20 Ounce (600 ml) Sausage |
| அதிகபட்ச உள்ளீட்டு அழுத்தம் | 145 பி.எஸ்.ஐ |
| அதிகபட்ச இயக்க அழுத்தம் | 125 பி.எஸ்.ஐ |
| பரிமாணங்கள் (L x W x H) | 22 x 10 x 3 அங்குலம் |
| பொருளின் எடை | 2.79 பவுண்டுகள் (1.27 கிலோகிராம்கள்) |
| UPC | 717647610072 |
| கட்டுமான வகை | Multi-part, Drawn aluminum barrel |
| உள்ளிட்ட கூறுகள் | Product & Instructions Guide, Six white cone nozzles |
உத்தரவாதம் மற்றும் ஆதரவு
For warranty information or technical support regarding your COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator, please contact COX North America directly.
COX is committed to quality and durability. All products are manufactured in-house at facilities in Haslett, Michigan, and Newbury, England, adhering to rigid quality management processes.
For further assistance, visit the official COX webதளத்தில் அல்லது உங்கள் கொள்முதல் ஆவணங்களுடன் வழங்கப்பட்ட தொடர்புத் தகவலைப் பார்க்கவும்.
