Sealey IHS1 Stand for IWMH1809R/IFSH1809R Heaters - Instruction Manual

1. அறிமுகம்

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Sealey IHS1 stand. This stand is designed to convert the Sealey IWMH1809R wall-mounted infrared heater into a freestanding IFSH1809R unit. Please read these instructions thoroughly before use and retain them for future reference.

Figure 1: The Sealey IHS1 stand with a compatible infrared heater installed, showcasing its freestanding design.

2. பாதுகாப்பு வழிமுறைகள்

தனிப்பட்ட காயம் அல்லது தயாரிப்புக்கு சேதம் ஏற்படாமல் தடுக்க பின்வரும் பாதுகாப்பு முன்னெச்சரிக்கை நடவடிக்கைகளை எப்போதும் கவனிக்கவும்.

• Ensure the stand is assembled on a flat, stable, and level surface.
• Do not exceed the maximum weight capacity of the stand. This stand is specifically designed for Sealey IWMH1809R/IFSH1809R heaters.
• Regularly inspect all fasteners and connections to ensure they are secure.
• Keep children and pets away from the stand and attached heater during operation.
• Do not attempt to modify the stand in any way.
• When moving the stand with the heater attached, ensure the heater is switched off and cooled, and move with care to prevent tipping.

3. தொகுப்பு உள்ளடக்கங்கள்

அசெம்பிளியைத் தொடங்குவதற்கு முன் அனைத்து கூறுகளும் உள்ளனவா என்பதைச் சரிபார்க்கவும்:

• 1 x Sealey IHS1 Stand Assembly (includes base, pole sections, and mounting bracket)
• Required Fasteners and Tools (if applicable, refer to heater manual for heater-specific fasteners)

4. அமைப்பு மற்றும் அசெம்பிளி

Follow these steps to assemble the IHS1 stand and attach your compatible heater.

1. அடித்தளத்தை இணைக்கவும்: Place the stand base on a flat, stable surface. Ensure the base is fully seated and stable.
   

   Figure 2: The robust circular base of the Sealey IHS1 stand, designed for stability.

2. Attach Pole Sections: Securely connect the pole sections to the base and to each other, following the instructions provided with the stand's packaging. Ensure all connections are tightened.
3. ஹீட்டரை பொருத்தவும்: Attach your Sealey IWMH1809R heater to the top mounting bracket of the IHS1 stand. Refer to your heater's instruction manual for specific mounting hardware and procedures. Ensure the heater is securely fastened and balanced on the stand.
4. கேபிள் மேலாண்மை: Route the heater's power cable along the stand pole using the provided cable clips to prevent tripping hazards and maintain a tidy appearance.
   

   படம் 3: ஒரு நெருக்கமான படம் view of the cable management clip on the stand's pole, used to secure the power cord.

5. இயக்க வழிமுறைகள்

The IHS1 stand provides a stable platform for your heater. Its primary operational feature is height adjustment.

1. உயரத்தை சரிசெய்தல்: To adjust the height of the heater, loosen the height adjustment collar on the stand pole. Carefully raise or lower the upper pole section to the desired height (between 1340mm and 1700mm). Once the desired height is achieved, securely tighten the adjustment collar to lock the pole in place.
   

   Figure 4: The height adjustment collar on the stand's pole, allowing for variable height settings.
2. நிலைப்படுத்தல்: Place the stand with the attached heater in a location where it can provide optimal heating without obstruction. Ensure there is adequate clearance around the heater as specified in the heater's manual.
   

   Figure 5: The Sealey IHS1 stand with an infrared heater positioned outdoors, demonstrating its freestanding utility.

Note: For specific operating instructions regarding the heater's power, heat settings, and sensor functions, please refer to the instruction manual provided with your Sealey IWMH1809R/IFSH1809R heater. An example of a heater control panel is shown below for reference.

படம் 6: எ.காample of a control panel found on compatible Sealey heaters, featuring ON, OFF, and SENSOR buttons.

6. பராமரிப்பு

To ensure the longevity and safe operation of your IHS1 stand:

• சுத்தம்: மென்மையான, டி துணியால் ஸ்டாண்டைத் துடைக்கவும்.amp துணி. சிராய்ப்பு கிளீனர்கள் அல்லது கரைப்பான்களைப் பயன்படுத்த வேண்டாம்.
• ஆய்வு: Periodically check all bolts, screws, and connections for tightness. Retighten if necessary.
• சேமிப்பு: If storing the stand for an extended period, disassemble it if desired and store in a dry, protected area.

7. சரிசெய்தல்

If you encounter issues with your IHS1 stand, consider the following:

• நிலைத்தன்மையின்மை:
  • ஸ்டாண்ட் முற்றிலும் தட்டையான மற்றும் சமமான மேற்பரப்பில் இருப்பதை உறுதிசெய்யவும்.
  • Verify all pole sections and the base are securely tightened.
  • Confirm the heater is properly centered and balanced on the mounting bracket.
• உயரத்தை சரிசெய்வதில் சிரமம்:
  • Ensure the height adjustment collar is fully loosened before attempting to adjust.
  • Check for any obstructions or debris within the pole sections.

For issues related to the heater's functionality, refer to the heater's specific instruction manual.

8. விவரக்குறிப்புகள்

9. உத்தரவாதம் மற்றும் ஆதரவு

This Sealey IHS1 stand comes with a 1 வருட உத்தரவாதம். For full terms and conditions, please refer to the official Sealey website or contact Sealey customer support.

Figure 7: Sealey's 1 Year Guarantee emblem, indicating product assurance.

For technical assistance, spare parts, or warranty claims, please contact your authorized Sealey dealer or visit the official Sealey webஆதரவு தகவலுக்கான தளம்.

Please note: "Terms and conditions apply" as indicated by the manufacturer.