1. அறிமுகம்
The LINEAR SEG-1 IEI Secured Ethernet Gateway is designed to facilitate secure communication between IEI access control systems and a network. It converts TCP/IP data to serial data, enabling access systems to send and receive information over a standard network. This allows for programming and management of the access panel from any network-connected PC running Hub Manager Professional (version 5.0 or higher).
2. தயாரிப்பு முடிந்துவிட்டதுview
The SEG-1 gateway features a compact design with essential ports and indicators for network and serial communication.
படம் 1: முன் view of the LINEAR SEG-1 IEI Secured Ethernet Gateway. The front panel includes an Ethernet port labeled "NETWORK", two serial ports labeled "RS232" and "RS485", and indicator LEDs for status.
முக்கிய கூறுகள் அடங்கும்:
- NETWORK Port: RJ45 Ethernet connector for TCP/IP communication.
- RS232 போர்ட்: Serial communication port.
- RS485 போர்ட்: Serial communication port.
- நிலை LED கள்: Indicators for power, network activity, and data transmission.
3. அமைவு வழிமுறைகள்
Follow these steps to properly set up your SEG-1 gateway:
- மவுண்டிங்: Securely wall mount the SEG-1 unit using separately provided hardware. Choose a location that allows for easy access to power and network connections, and is within range of the IEI access panel.
- மின் இணைப்பு: Connect a separate 12VDC power supply (150 mA maximum) to the SEG-1. A modular cord is provided for communication with the access panel, which may also carry power depending on the specific access panel model. Ensure the power supply is stable and meets the specified requirements.
- பிணைய இணைப்பு: Connect an Ethernet cable from your network router or switch to the "NETWORK" RJ45 port on the SEG-1 gateway. Verify that the network connection is active (indicated by corresponding LEDs).
- தொடர் இணைப்பு: Connect the appropriate serial cable from the IEI access panel to either the "RS232" or "RS485" port on the SEG-1, depending on the access panel's serial interface.
- மென்பொருள் கட்டமைப்பு: Install and configure Hub Manager Professional (version 5.0 or higher) on a network-connected PC. Refer to the Hub Manager Professional manual for detailed software setup and gateway integration instructions.
4. இயக்க வழிமுறைகள்
Once properly installed and configured, the SEG-1 gateway operates as an interface between your network and the IEI access control system.
- தரவு மாற்றம்: The gateway automatically converts TCP/IP data from the network to serial data for the access panel, and vice-versa.
- தொலை மேலாண்மை: Use Hub Manager Professional on a networked computer to manage and program the IEI access system. All commands and data will be routed through the SEG-1 gateway.
- நிலை கண்காணிப்பு: Observe the status LEDs on the front panel for indications of power, network link, and data activity. Refer to the LED indicator section (if available in a more detailed manual) for specific meanings.
5. பராமரிப்பு
The LINEAR SEG-1 gateway requires minimal maintenance to ensure optimal performance.
- சுத்தம்: Periodically clean the exterior of the unit with a soft, dry cloth. Avoid using liquid cleaners or solvents.
- சுற்றுச்சூழல் நிலைமைகள்: Ensure the unit is operated within its specified temperature and humidity ranges. Avoid exposing the unit to excessive dust, moisture, or direct sunlight.
- நிலைபொருள் புதுப்பிப்புகள்: Check the LINEAR website periodically for any available firmware updates for the SEG-1 gateway. Follow the provided instructions carefully for any update procedures.
6. சரிசெய்தல்
If you encounter issues with your SEG-1 gateway, consider the following troubleshooting steps:
- சக்தி இல்லை:
- Verify the 12VDC power supply is correctly connected and functioning.
- Check all power cables and connections.
- நெட்வொர்க் இணைப்பு இல்லை:
- Ensure the Ethernet cable is securely connected to both the SEG-1 and the network device (router/switch).
- Check network status LEDs on the SEG-1 and the network device.
- Confirm network settings on the PC running Hub Manager Professional.
- Communication Errors with Access Panel:
- Verify the correct serial port (RS232 or RS485) is being used and the cable is properly connected.
- Ensure the IEI access panel is powered on and functioning correctly.
- Check the configuration settings within Hub Manager Professional for the correct gateway and access panel parameters.
- Hub Manager Professional Connection Issues:
- Confirm that Hub Manager Professional (v5.0 or higher) is installed and configured correctly.
- Ensure the PC is on the same network as the SEG-1 gateway.
- Check for any firewall settings on the PC or network that might be blocking communication.
7. விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| மாதிரி | SEG-1 |
| செயல்பாடு | TCP/IP to Serial Data Converter |
| இணக்கத்தன்மை | IEI Access Systems, Hub Manager Professional (v5.0+) |
| சக்தி தேவை | 12VDC, 150 mA max (separate power supply required) |
| மவுண்டிங் | Wall mount (hardware not included) |
| இணைப்பு | Ethernet (RJ45), RS232, RS485 |
| பொருளின் எடை | 15 பவுண்டுகள் |
| உற்பத்தியாளர் | LINEAR RESEARCH |
| முதல் தேதி கிடைக்கும் | டிசம்பர் 20, 2010 |
8. உத்தரவாதத் தகவல்
For detailed warranty information regarding the LINEAR SEG-1 IEI Secured Ethernet Gateway, please refer to the warranty card included with your product packaging or visit the official LINEAR webதளம். உத்தரவாத விதிமுறைகள் மற்றும் நிபந்தனைகள் பிராந்தியம் மற்றும் கொள்முதல் தேதியைப் பொறுத்து மாறுபடலாம்.
9. தொழில்நுட்ப ஆதரவு
If you require technical assistance or have questions not covered in this manual, please contact LINEAR customer support. Contact information can typically be found on the manufacturer's webதளத்தில் அல்லது தயாரிப்பு பேக்கேஜிங்கில்.
Note: Always ensure you have your product model number (SEG-1) and any relevant purchase information available when contacting support.
