WIKA 732.26 Differential Pressure Gauge User Manual

1. தயாரிப்பு முடிந்துவிட்டதுview

The WIKA 732.26 Differential Pressure Gauge, model 4375986, is a precision instrument designed for measuring differential pressure. This gauge features a 4.5-inch dial and a measurement range of 0-100 inches of water column (WC). Manufactured by Cole-Parmer in the United States, it boasts an accuracy of ±1% full-scale (ANSI/ASME Grade 1A).

முக்கிய அம்சங்கள் அடங்கும்:

• துல்லியம்: 1 percent full-scale (ANSI/ASME Grade 1A)
• வழக்கு: 316L துருப்பிடிக்காத எஃகு
• Diaphragm Fill: ஹாலோகார்பன்
• காட்சி: Analog digital
• லென்ஸ் பொருள்: அக்ரிலிக்

தயாரிப்பு படம்

ஒரு விரிவான view of the WIKA 732.26 Differential Pressure Gauge, showing its circular dial, stainless steel casing, and measurement scale from 0 to 100 in.H2O. The dial indicates 'differential pressure' and 'US NO OIL'.

2. விவரக்குறிப்புகள்

3. அமைவு மற்றும் நிறுவல்

Proper installation is crucial for accurate readings and the longevity of the WIKA 732.26 Differential Pressure Gauge. It is recommended that installation be performed by qualified personnel.

1. பேக்கிங்: Carefully remove the gauge from its packaging. Inspect for any visible damage that may have occurred during transit. Do not use if damaged.
2. மவுண்டிங்: The gauge should be mounted in a location where it is easily accessible for reading and maintenance, and protected from excessive vibration, temperature fluctuations, and direct sunlight. Ensure the mounting surface is stable and secure.
3. செயல்முறை இணைப்பு: Connect the gauge to the process lines using appropriate fittings. Ensure all connections are tight to prevent leaks. Refer to the specific connection type of your gauge model for proper fitting selection.
4. Pressure Equalization: Before applying differential pressure, ensure that both high and low pressure ports are open to the same pressure or are properly vented to atmosphere to prevent damage from sudden pressure surges.
5. கணினி ஒருங்கிணைப்பு: Integrate the gauge into your system according to your specific application requirements. Ensure that the pressure limits of the gauge (0-100"WC) are not exceeded.

எச்சரிக்கை: Exceeding the maximum static or overpressure safe limit (500 psi) can cause permanent damage to the gauge and may lead to system failure or injury.

4. இயக்க வழிமுறைகள்

The WIKA 732.26 Differential Pressure Gauge provides a clear analog display for differential pressure readings.

1. Understanding the Dial: The gauge dial is marked from 0 to 100 in.H2O (inches of water column). The needle indicates the current differential pressure.
2. அழுத்தத்தைப் பயன்படுத்துதல்: Once installed, apply the differential pressure across the high and low ports. The gauge will respond by moving the needle to the corresponding pressure value.
3. அளவைப் படித்தல்: Read the value indicated by the tip of the needle on the scale. For optimal accuracy, read the gauge directly from the front to avoid parallax error.
4. இயல்பான செயல்பாடு: During normal operation, monitor the gauge regularly to ensure the system is functioning within desired pressure parameters.

குறிப்பு: The gauge is marked "US NO OIL," indicating it is suitable for applications where oil-free measurement is required or preferred.

5. பராமரிப்பு

Regular maintenance ensures the continued accuracy and reliability of your WIKA differential pressure gauge.

• சுத்தம்: Clean the acrylic lens and stainless steel case with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the materials.
• ஆய்வு: Periodically inspect the gauge for any signs of physical damage, corrosion, or leaks at the connections.
• அளவுத்திருத்தம்: While the gauge is factory calibrated, periodic re-calibration by a qualified technician may be necessary depending on application requirements and industry standards.
• சேமிப்பு: If storing the gauge, ensure it is kept in a clean, dry environment within its specified temperature range.

6. சரிசெய்தல்

This section addresses common issues you might encounter with your differential pressure gauge.

• படிக்கவில்லை அல்லது தவறாகப் படிக்கவில்லை:
  • Check if the gauge is properly connected to both high and low pressure ports.
  • Ensure there is actual differential pressure being applied.
  • Verify that the pressure range of the gauge matches the expected process pressure.
  • Inspect for blockages in the pressure lines leading to the gauge.
• Gauge Needle Fluctuates Excessively:
  • This may indicate pulsations in the process pressure. Consider installing a snubber or dampener if not already present.
  • Check for vibrations in the mounting location.
• Visible Damage or Leaks:
  • If the gauge casing or lens is cracked, or if leaks are detected at the connections, the gauge may need to be replaced or professionally repaired. Do not attempt to repair internal components.

For issues not covered here, or for complex problems, contact WIKA technical support or a certified instrument technician.

7. உத்தரவாதம் மற்றும் ஆதரவு

WIKA products are manufactured to high standards of quality and reliability. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official WIKA webநீட்டிக்கப்பட்ட பாதுகாப்புக்கும் பாதுகாப்புத் திட்டங்கள் கிடைக்கக்கூடும்.

For technical assistance, product inquiries, or service, please contact WIKA customer support. Ensure you have your model number (4375986) and serial number (if applicable) ready when contacting support.

WIKA Official Webதளம்: www.wika.com