லீனியர் MCT-3 மெகாகோட் 3-சேனல் ரிமோட் கண்ட்ரோல் பயனர் கையேடு

1. அறிமுகம்

This manual provides instructions for the Linear MCT-3 Megacode 3-Channel Remote Control, model DNT00089. This remote is designed for use with Linear's Mega Code series of receivers, commonly found in garage door openers and automatic gate systems. It allows for the control of up to three separate devices.

The Linear MCT-3 remote transmits a unique code for each of its three buttons. This enables control of multiple devices, such as a garage door opener, an access gate, and an additional garage door operator, all from a single remote.

படம் 1.1: Comparison showing the Linear DNT00093 (left) and DNT00089 (right) remote controls. The DNT00093 is a replacement for the DNT00089, indicating functional equivalence.

2. தயாரிப்பு அம்சங்கள்

• Three-Channel Operation: Controls up to three separate Linear Mega Code compatible devices.
• Mega Code Technology: Utilizes secure, encrypted radio frequency transmission.
• Visor Clip Design: Easily attaches to a vehicle's sun visor for convenient access.
• கச்சிதமான மற்றும் நீடித்தது: Designed for everyday use.
• எளிதான நிரலாக்கம்: Simple "Learn" button programming with compatible receivers.

படம் 2.1: முன் view of the Linear MCT-3 Megacode 3-Channel Remote Control, showing its three distinct buttons.

3. அமைப்பு மற்றும் நிரலாக்கம்

To program your Linear MCT-3 remote control, follow these steps. Ensure you are near your garage door opener or gate receiver during this process.

1. Locate the Receiver's Learn Button: On your garage door opener or gate receiver, find the "Learn" button. The location of this button varies by model, but it is typically on the motor unit itself. Refer to your opener's manual if you cannot locate it.
2. Activate Learn Mode: Press and release the "Learn" button on your receiver. The indicator light on the receiver will typically illuminate or flash, indicating it is in programming mode. You usually have about 30 seconds to complete the next step.
3. ரிமோட்டை நிரல் செய்யவும்: While the receiver is in learn mode, press and hold the desired button on your Linear MCT-3 remote control that you wish to use for this device.
4. நிரலாக்கத்தை உறுதிப்படுத்தவும்: Release the remote button once the receiver's indicator light changes (e.g., turns off, flashes rapidly, or the garage door/gate moves slightly). This confirms successful programming.
5. சோதனை செயல்பாடு: Press the programmed button on your remote control to ensure it activates the garage door or gate.

குறிப்பு: If you wish to program additional buttons on the remote for other devices, repeat steps 2-5 for each device, selecting a different button on the remote each time.

4. ஆபரேஷன்

Once programmed, operating your Linear MCT-3 remote control is straightforward:

• சாதனத்தை இயக்கு: Press the corresponding button on the remote control that has been programmed to your garage door opener or gate.
• வரம்பு: For optimal performance, ensure you are within a reasonable operating range of your receiver. Environmental factors can affect signal range.

5. பராமரிப்பு: பேட்டரி மாற்றுதல்

The Linear MCT-3 remote control requires one 9V battery. If the remote's indicator light does not illuminate when a button is pressed, or if the range significantly decreases, the battery may need replacement.

1. Open the Remote Casing: Locate the battery compartment cover on the back of the remote. This may require a small screwdriver or prying tool to open carefully.
2. பழைய பேட்டரியை அகற்று: Carefully remove the old 9V battery from its terminals.
3. புதிய பேட்டரியைச் செருகவும்: Insert a new 9V alkaline battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
4. மூடு Casing: Replace the battery compartment cover, ensuring it is securely fastened.
5. சோதனை: Test the remote's operation with your programmed device.

அகற்றல்: Please dispose of old batteries responsibly according to local regulations.

6. சரிசெய்தல்

7. விவரக்குறிப்புகள்

8. உத்தரவாதம் மற்றும் ஆதரவு

For specific warranty information and technical support regarding your Linear MCT-3 Megacode 3-Channel Remote Control, please refer to the documentation provided with your purchase or contact Linear directly through their official webஉத்தரவாதக் கோரிக்கைகளுக்கு உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.

மேலும் உதவிக்கு, நீங்கள் இங்கு வருகை தரலாம் நேரியல் webதளம் (எ.காampஇணைப்பு, உண்மையான இணைப்பு மாறுபடலாம்).