DigiTech DOD250-13

DOD Overdrive 250 Analog Overdrive Preamp பயனர் கையேடு

Model: DOD250-13

அறிமுகம்

The DOD Overdrive Preamp 250 is a legendary analog overdrive pedal designed for guitar and bass instruments. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DOD Overdrive 250 to ensure optimal performance and longevity.

அமைவு

பெடலை இயக்குதல்

The DOD Overdrive 250 can be powered by a single 9V alkaline dry battery or an optional 9V DC power supply (PS0913DC). Ensure the power source is correctly connected before use.

DOD Overdrive 250 pedal showing the 9V DC power supply input jack on the side.

படம் 1: Power Supply Connector. Connect a 9V DC power adapter here.

உங்கள் பெடலை இணைக்கிறது

உங்கள் கருவியை இணைக்கவும் IN jack on the right side of the pedal using a standard 1/4-inch instrument cable. Connect the வெளியே பெடலின் இடது பக்கத்தில் உள்ள பலா உங்களுக்கு ampமற்றொரு 1/4-இன்ச் இன்ஸ்ட்ரூமென்ட் கேபிளைப் பயன்படுத்தி உங்கள் சிக்னல் சங்கிலியில் உள்ள லிஃபையர் அல்லது அடுத்த பெடலை இணைக்கவும்.

DOD Overdrive 250 pedal showing the input and output jacks on the sides.

படம் 2: Input and Output Jacks. The input jack is on the right, and the output jack is on the left.

பெடலை இயக்குதல்

The DOD Overdrive 250 features two primary control knobs: ஆதாயம் மற்றும் நிலை, along with a footswitch and an LED indicator.

மேல் view of the DOD Overdrive 250 pedal showing the Gain and Level knobs, footswitch, and blue LED.

படம் 3: Front Panel Controls. The Gain and Level knobs are at the top, with the footswitch and LED below.

கட்டுப்பாடுகள்

  • கெய்ன்: This knob controls the amount of overdrive or distortion applied to your signal. Turning it clockwise increases the saturation, ranging from a subtle grit to a full, aggressive grind.
  • நிலை: This knob adjusts the overall output volume of the pedal. It can be used to match the bypassed signal volume, or to provide a significant boost for solos or to push your amplifier harder. With the Gain set low, increasing the Level can provide a clean boost.

கால்சுவிட்ச் மற்றும் LED காட்டி

The large footswitch activates or bypasses the effect. When the effect is active, the crisp blue LED indicator will illuminate, providing clear visual feedback of the pedal's status.

DOD Overdrive 250 pedal with an arrow pointing to the blue LED indicator.

படம் 4: Crisp Blue LED Indication. The LED illuminates when the effect is active.

உண்மையான பைபாஸ்

The DOD Overdrive 250 features true bypass circuitry. This means that when the pedal is disengaged (effect off), your guitar's signal passes directly through the pedal without any electronic interference, preserving your original tone. This is a significant improvement over older designs that could color the bypassed signal.

பராமரிப்பு

பேட்டரி மாற்று

If using a 9V battery, replace it when the LED indicator dims or the pedal's performance degrades. To replace the battery, carefully remove the bottom plate of the pedal. Disconnect the old battery and connect a new 9V alkaline battery, ensuring correct polarity. Securely reattach the bottom plate.

சுத்தம் செய்தல்

Wipe the pedal's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.

சேமிப்பு

When not in use for extended periods, disconnect the power supply or remove the battery to prevent leakage and preserve battery life. Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures.

சரிசெய்தல்

பிரச்சனைசாத்தியமான காரணம்தீர்வு
ஒலி அல்லது பலவீனமான சமிக்ஞை இல்லைIncorrect cable connections, dead battery, faulty power supply, pedal not engaged.Check all cable connections. Replace 9V battery or verify power supply connection. Ensure the pedal is engaged (blue LED on). Test with different cables.
தேவையற்ற சத்தம் அல்லது ஓசைGround loop, faulty cables, interference from other electronics, power supply issues.Ensure all equipment is properly grounded. Try different cables. Move pedal away from power transformers or fluorescent lights. Use a regulated power supply.
LED ஒளிரவில்லைNo power, dead battery, faulty LED.Check power supply or replace battery. If problem persists, contact support.

விவரக்குறிப்புகள்

அம்சம்விவரம்
மாதிரிDOD250-13
பரிமாணங்கள் (L x W x H)4.88 x 2.61 x 3.25 அங்குலம்
எடை9.92 ounces (~0.62 lbs)
உள்ளீடு (கள்)1/4-inch Instrument
வெளியீடு(கள்)1/4-inch Instrument
சேஸ் பொருள்All Metal (Aluminum)
பவர் சப்ளை9V Alkaline Dry Battery or 9V DC (PS0913DC)
சமிக்ஞை வடிவம்அனலாக்
நிறம்Yellow Metallic Flake

உத்தரவாதம் மற்றும் ஆதரவு

For detailed warranty information, please refer to the documentation included with your purchase or visit the official DigiTech website. DigiTech provides support for their products through their authorized service centers and online resources.

You can find more information and contact support via the official DigiTech store: DigiTech Store on Amazon.

Note: No official product videos from the seller were found in the provided data to be embedded in this manual.

தொடர்புடைய ஆவணங்கள் - DOD250-13

முன்view டிஜிடெக் ஆர்பி-10 கிட்டார் சிக்னல் செயலி/கால் கட்டுப்படுத்தி மற்றும் முன்amp உரிமையாளர் கையேடு
This owner's manual provides comprehensive details on the DigiTech RP-10 Guitar Signal Processor/Foot Controller and Preamp, covering setup, operation, programming, effects, and MIDI functions.
முன்view டிஜிடெக் ஆர்பி-6 கிட்டார் சிக்னல் செயலி/கால் கட்டுப்படுத்தி மற்றும் முன்amp உரிமையாளர் கையேடு
DigiTech RP-6 கிட்டார் சிக்னல் செயலி/கால் கட்டுப்படுத்தி மற்றும் முன்பக்கத்திற்கான விரிவான உரிமையாளர் கையேடுamp, அதன் அம்சங்கள், செயல்பாடுகள், விளைவுகள், அளவுருக்கள், விவரக்குறிப்புகள் மற்றும் அமைப்பை விவரிக்கிறது.
முன்view DigiTech RP-1 Guitar Effects Processor/Controller and Preamp உரிமையாளர் கையேடு
Comprehensive owner's manual for the DigiTech RP-1, detailing its features, operations, programming, MIDI implementation, and warranty information for guitarists.
முன்view டிஜிடெக் ஆர்பி-5 கிட்டார் சிக்னல் செயலி/கால் கட்டுப்படுத்தி மற்றும் முன்amp உரிமையாளர் கையேடு
DigiTech RP-5 கிட்டார் சிக்னல் செயலி/கால் கட்டுப்படுத்தி மற்றும் முன்பக்கத்திற்கான விரிவான உரிமையாளர் கையேடுamp, detailing its features, controls, effects, parameters, setup, and specifications. Learn how to use the S-DISC processor for studio and live applications.
முன்view DigiTech HardWire CM-2 Tube Overdrive Owner's Manual
Owner's manual for the DigiTech HardWire CM-2 Tube Overdrive guitar effects pedal, detailing its features, operation, safety instructions, warranty, and specifications.
முன்view DigiTech Bass Driver Bass Overdrive/Distortion Pedal - Owner's Manual
Comprehensive owner's manual for the DigiTech Bass Driver Bass Overdrive/Distortion pedal. Learn about its AudioDNA™ technology, controls (Level, Tone, Blend, Morph), connections (Input, Out 1 Amp, Out 2 Mixer with CIT™ cabinet modeling), setup, battery replacement, safety instructions, and warranty information.