தயாரிப்பு முடிந்துவிட்டதுview
The Cen-Tech 6/12V Circuit Tester is a diagnostic tool designed to quickly check for the presence of electrical current in 6-volt and 12-volt DC systems. It features a durable construction with a needle point probe and an integrated indicator light to confirm circuit activity.
முக்கியமான பாதுகாப்பு தகவல்
Read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- பயன்பாட்டின் போது எப்போதும் ANSI- அங்கீகரிக்கப்பட்ட பாதுகாப்பு கண்ணாடிகளை அணியுங்கள்.
- Do not use this circuit tester on AC voltage or circuits exceeding 12 volts DC.
- Ensure the alligator clip has a secure and clean ground connection before probing.
- நேரடி மின் கூறுகளுடன் தொடர்பைத் தவிர்க்கவும்.
- Keep hands and clothing away from moving parts when working on vehicles.
- Inspect the tool for damage before each use. Do not use if damaged.
- குழந்தைகளுக்கு எட்டாத இடத்தில் வைக்கவும்.
அமைவு
The Cen-Tech 6/12V Circuit Tester requires minimal setup. Ensure the tool is clean and free from any visible damage before beginning your work.
- Uncoil the lead wire and ensure it is not tangled or kinked.
- Confirm the needle point probe is securely attached and not bent.
இயக்க வழிமுறைகள்
Follow these steps to test for voltage in 6V or 12V DC circuits:
- Prepare the Circuit: Ensure the circuit you intend to test is accessible and safe to work on.
- தரையுடன் இணைக்கவும்: Attach the alligator clip of the circuit tester to a reliable ground source. For vehicle applications, this is typically the negative terminal of the battery or a clean, unpainted metal part of the chassis. A good ground connection is essential for accurate readings.
- Probe the Circuit: Carefully touch the needle point probe to the wire, terminal, or component you wish to test. Ensure firm contact.
- Observe Indicator Light: If electrical current is present at the point of contact, the indicator light within the tester's handle will illuminate. The brightness of the light may vary with voltage, but its illumination confirms current flow.
- முடிவுகளை விளக்குதல்: If the light illuminates, the circuit is live. If the light does not illuminate, there is no current, or the circuit is open at that point.
- துண்டிக்கவும்: After testing, carefully remove the probe from the circuit and then disconnect the alligator clip from the ground source.
பராமரிப்பு
Proper maintenance ensures the longevity and reliability of your circuit tester.
- சுத்தம்: After each use, wipe the probe and handle with a clean, dry, soft cloth to remove any dirt, grease, or moisture.
- சேமிப்பு: Store the circuit tester in a dry, clean environment, away from direct sunlight, extreme temperatures, and corrosive materials.
- ஆய்வு: Periodically inspect the lead wire for cuts, fraying, or damage. Check the probe for bends or corrosion. Replace the unit if any damage is found.
சரிசெய்தல்
பொதுவான பிரச்சினைகள் மற்றும் அவற்றின் தீர்வுகளுக்கு கீழே உள்ள அட்டவணையைப் பார்க்கவும்.
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Indicator light does not illuminate on a known live circuit. | Poor or no ground connection. | Ensure the alligator clip is securely connected to a clean, reliable ground source. |
| Indicator light is dim. | குறைந்த தொகுதிtage in the circuit or poor contact. | Verify the circuit voltage is within the 6-12V range. Ensure good contact with both the probe and the ground. |
| Tester appears physically damaged. | Physical impact or wear. | Discontinue use immediately. Replace the unit to ensure safety and accurate testing. |
விவரக்குறிப்புகள்
- பிராண்ட்: சென்-டெக்
- மாதிரி எண்: CECOMINOD036567
- இயக்க தொகுதிtage: 6V / 12V DC
- முன்னணி கம்பி நீளம்: 5 அடி
- ஆய்வு வகை: ஊசி முனை
- கைப்பிடி பொருள்: Heavy duty high impact plastic
- பொருளின் எடை: 16 அவுன்ஸ் (1 பவுண்டு)
- சக்தி ஆதாரம்: Corded Electric (relies on circuit power)
- அளவீட்டு வகை: Voltmeter (indicates presence of voltage)
- UPC: 784672317917
உத்தரவாத தகவல்
For specific warranty details, please refer to the documentation provided at the time of purchase or contact the retailer directly. Warranty terms typically cover manufacturing defects for a limited period.
வாடிக்கையாளர் ஆதரவு
If you have questions or require assistance with your Cen-Tech 6/12V Circuit Tester, please contact the retailer where the product was purchased or refer to Cen-Tech's official customer service channels for support.
