இடத்தை சேமிக்கும் ஸ்டீல் ஸ்டாண்ட் அறிவுறுத்தல் கையேடுடன் கூடிய விவேர் இரட்டை பருத்தி ஹேமாக்

அறிமுகம்

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Vivere Double Cotton Hammock with Space-Saving Steel Stand. Please read all instructions carefully before use to ensure safe and proper setup.

பாதுகாப்பு தகவல்

• Always assemble the hammock stand on a flat, stable surface.
• பயன்படுத்துவதற்கு முன் அனைத்து இணைப்புகளும் பாதுகாப்பாக இறுக்கப்பட்டுள்ளதா என்பதை உறுதிப்படுத்தவும்.
• அதிகபட்ச எடை திறன் 450 பவுண்டுகள் (204 கிலோ) தாண்டக்கூடாது.
• Keep children and pets away from the hammock during assembly.
• Regularly inspect the hammock fabric and stand for any signs of wear or damage. Discontinue use if damage is found.
• Do not stand on the hammock or use it as a swing.
• Avoid placing the hammock near open flames or heat sources.

பாகங்கள் பட்டியல்

Before assembly, ensure all components are present.

• Hammock Fabric (1)
• Steel Stand Base Legs (2)
• Steel Stand Crossbar (1)
• Steel Stand Frame Bars (2)
• J-Hooks with Wing Nuts (2)
• Carrying Bag (1)
• Rubber End Caps (4 + 2 spare)

Image: The complete Vivere Double Cotton Hammock with its space-saving steel stand and accompanying carrying bag.

சட்டசபை வழிமுறைகள்

Follow these steps for quick and easy assembly. It is recommended to have two people for initial setup, though one person can manage.

Step 1: Lay Out Your Parts

Unpack all components and lay them out on a clear, flat surface. Identify the two base legs, the crossbar, and the two frame bars. Locate the two J-hooks with their wing nuts.

Image: All steel stand components laid out on a grassy area, ready for assembly.

Step 2: Attach Crossbar into Base Legs

Insert the ends of the crossbar into the designated openings on the two base legs. Ensure they are fully seated.

Step 3: Attach Frame Bar to Leg Base

Connect each frame bar to the top of its corresponding leg base. Secure these connections using the provided hand-tightened bolts.

Step 4: Attach J-Hook to Frame Bar

Insert a J-hook into the desired height adjustment hole on each frame bar. Secure it with the wing nut, ensuring it is tightened firmly.

Step 5: Attach Hammock to J-Hook on Frame Bar

Drape the hammock fabric over the J-hooks on both frame bars. Ensure the hammock is evenly distributed and securely resting on the hooks.

Video: An official Vivere video demonstrating the five easy steps to assemble the Vivere Double Cotton Hammock with Space-Saving Steel Stand. This video provides a visual guide for laying out parts, attaching the crossbar, connecting frame bars, securing J-hooks, and finally attaching the hammock.

Image: An adult and child comfortably seated in the assembled Vivere Double Cotton Hammock, demonstrating its capacity for two individuals.

Image: Two children sitting in the Vivere Double Cotton Hammock next to a swimming pool, highlighting its suitability for outdoor relaxation.

இயக்க வழிமுறைகள்

To use your hammock, gently sit in the center, allowing the fabric to conform to your body. For optimal comfort, adjust the J-hooks to achieve your preferred hammock height and tension. The hammock is designed for relaxation and light swaying motions.

பராமரிப்பு

Cleaning the Hammock Fabric

The cotton hammock fabric can be hand washed with mild soap and cold water. Air dry completely before storing. Do not bleach or tumble dry.

Cleaning the Steel Stand

Wipe the steel stand with a damp cloth to remove dirt and debris. For stubborn stains, use a mild detergent. Ensure the stand is dry before storage to prevent rust.

சேமிப்பு

When not in use, especially during inclement weather or off-season, disassemble the hammock and stand. Store all components in the provided carrying bag in a dry, cool place to prolong product life.

Image: A close-up of the Vivere Premium Carry Bag, designed for convenient storage and transport of the hammock and stand components.

சரிசெய்தல்

Hammock feels too low/high

Adjust the J-hooks on the frame bars to a different height setting. There are multiple holes for customization.

ஸ்டாண்ட் நிலையற்றதாக உணர்கிறது

Ensure all bolts and wing nuts are securely tightened. Verify that the stand is placed on a completely flat and level surface.

சத்தமிடும் சத்தங்கள்

Apply a small amount of lubricant to the J-hooks or any moving parts where metal meets metal.

விவரக்குறிப்புகள்

உத்தரவாத தகவல்

Vivere products are manufactured to high standards and are backed by a limited warranty. Please refer to the product packaging or the official Vivere webகுறிப்பிட்ட உத்தரவாத விதிமுறைகள் மற்றும் நிபந்தனைகளுக்கான தளம்.

வாடிக்கையாளர் ஆதரவு

For further assistance, parts replacement, or any inquiries not covered in this manual, please contact Vivere customer support through their official webதயாரிப்பு வாங்கிய தளம் அல்லது சில்லறை விற்பனையாளர்.