சீலி SMS2003.B வைர பூசப்பட்ட அரைக்கும் வட்டு 100மிமீ அறிவுறுத்தல் கையேடு

1. அறிமுகம்

This manual provides essential information for the safe and effective use of the Sealey SMS2003.B Diamond Coated Grinding Disc. This disc is specifically designed as a replacement or accessory for the Sealey Model No. SMS2003 Saw Blade Sharpener. It features a 100mm diameter and a diamond coating for efficient and precise grinding of saw blades.

Please read these instructions carefully before installation and operation to ensure proper usage and to prevent injury or damage to the product or equipment.

2. பாதுகாப்பு தகவல்

Always adhere to general workshop safety practices and specific instructions provided with your Sealey SMS2003 Saw Blade Sharpener. Failure to do so may result in serious injury.

• கண் பாதுகாப்பு: Always wear approved safety glasses or goggles when operating the saw blade sharpener with the grinding disc.
• கை பாதுகாப்பு: Wear appropriate protective gloves to prevent cuts and abrasions.
• செவிப்புலன் பாதுகாப்பு: Use ear protection, as grinding operations can be noisy.
• சுவாச பாதுகாப்பு: If grinding produces excessive dust, wear a dust mask or respirator.
• இயந்திர துண்டிப்பு: Ensure the saw blade sharpener is disconnected from the power supply before installing, removing, or adjusting the grinding disc.
• வட்டு ஆய்வு: Before each use, inspect the grinding disc for any signs of damage, cracks, or excessive wear. Do not use a damaged disc.
• முறையான ஏற்றம்: Ensure the disc is correctly and securely mounted on the sharpener spindle according to the sharpener's instructions.
• வேலை பகுதி: பணியிடத்தை சுத்தமாகவும், நன்கு வெளிச்சமாகவும், தடைகள் இல்லாமல் வைக்கவும்.
• குழந்தைகள் மற்றும் பார்வையாளர்கள்: குழந்தைகள் மற்றும் அங்கீகரிக்கப்படாத நபர்களை இயக்கப் பகுதியிலிருந்து விலக்கி வைக்கவும்.

3. அமைவு மற்றும் நிறுவல்

The SMS2003.B grinding disc is designed for straightforward installation on the Sealey SMS2003 Saw Blade Sharpener. Refer to your SMS2003 sharpener's manual for detailed instructions on disc replacement.

1. மின் இணைப்பை துண்டிக்கவும்: Ensure the Sealey SMS2003 Saw Blade Sharpener is unplugged from the power source.
2. Access Spindle: Locate the grinding disc spindle on your SMS2003 sharpener. You may need to remove a guard or cover as per your sharpener's manual.
3. Remove Old Disc (if applicable): If replacing an existing disc, carefully remove the retaining nut or clamp and slide the old disc off the spindle. Dispose of worn or damaged discs responsibly.
4. புதிய வட்டை நிறுவவும்: Place the new Sealey SMS2003.B Diamond Coated Grinding Disc onto the spindle, ensuring it sits flush against any backing flanges or washers. The disc should fit without excessive force.
5. Secure Disc: Reinstall the retaining nut or clamp, tightening it securely but without over-tightening, which could damage the disc. Ensure the disc is centered and does not wobble.
6. Replace Guards: Reattach any guards or covers that were removed.
7. சோதனை சுழற்சி: Manually rotate the disc to ensure it spins freely and without obstruction.

படம் 1: Sealey SMS2003.B Diamond Coated Grinding Disc

This image shows the Sealey SMS2003.B Diamond Coated Grinding Disc, highlighting its 100mm diameter and diamond-coated surface, ready for installation on a compatible saw blade sharpener.

4. இயக்க வழிமுறைகள்

Once the SMS2003.B grinding disc is securely installed on your Sealey SMS2003 Saw Blade Sharpener, you can proceed with sharpening operations. Always refer to your sharpener's manual for specific operating procedures and settings.

• பவர் ஆன்: Connect the sharpener to the power supply.
• அமைப்புகளைச் சரிசெய்யவும்: Set the appropriate angles and depth for the saw blade you intend to sharpen, as instructed by your SMS2003 manual.
• நிலை பிளேடு: Carefully position the saw blade in the sharpener's jig or clamp, ensuring it is stable and correctly aligned with the grinding disc.
• அரைக்கத் தொடங்குங்கள்: Turn on the sharpener. Allow the disc to reach full operating speed before making contact with the saw blade.
• Controlled Contact: Bring the saw blade into gentle, controlled contact with the grinding disc. Avoid excessive pressure, as this can overheat the blade, damage the disc, or reduce sharpening effectiveness. Let the diamond coating do the work.
• சீரான கூர்மைப்படுத்துதல்: Sharpen each tooth evenly, following the recommended passes and techniques from your sharpener's manual.
• Monitor Disc: Observe the disc for any unusual vibrations or sounds during operation. If detected, immediately turn off the sharpener and inspect the disc and mounting.
• பவர் ஆஃப்: Once sharpening is complete, turn off the sharpener and allow the disc to come to a complete stop before removing the saw blade.

5. பராமரிப்பு மற்றும் சேமிப்பு

Proper maintenance and storage will extend the life of your Sealey SMS2003.B Diamond Coated Grinding Disc and ensure consistent performance.

• சுத்தம்: After each use, disconnect the sharpener from power. Use a soft brush or compressed air to remove any grinding dust or debris from the disc surface. Do not use harsh chemicals or abrasive cleaners.
• ஆய்வு: Regularly inspect the disc for signs of wear, chipping, or damage. A worn disc will lose its sharpening effectiveness. Replace the disc if significant wear or damage is observed.
• சேமிப்பு: Store the grinding disc in a clean, dry place, away from direct sunlight, moisture, and extreme temperatures. If removed from the sharpener, store it in its original packaging or a protective container to prevent accidental damage.
• பாதிப்பைத் தவிர்க்க: Do not drop or subject the disc to impact, as this can cause cracks or damage to the diamond coating.

6. சரிசெய்தல்

If you encounter issues while using your SMS2003.B grinding disc, consider the following common troubleshooting steps:

• Poor Sharpening Performance:
  • Check if the disc is securely mounted and not wobbling.
  • Ensure the saw blade is correctly positioned and clamped in the sharpener.
  • Verify that the sharpener's settings (angles, depth) are appropriate for the blade type.
  • Inspect the disc for excessive wear or glazing. A worn disc will need replacement.
• அதிகப்படியான அதிர்வு அல்லது சத்தம்:
  • Immediately turn off the sharpener.
  • Check if the disc is properly centered and tightened on the spindle.
  • Inspect the disc for any damage or imbalance. A damaged disc must be replaced.
• Disc Overheating:
  • Reduce the pressure applied during grinding.
  • Allow the disc and blade to cool periodically during extended sharpening sessions.

If problems persist after following these steps, consult the Sealey SMS2003 Saw Blade Sharpener manual or contact Sealey customer support.

7. விவரக்குறிப்புகள்

8. உத்தரவாதத் தகவல்

This Sealey SMS2003.B Diamond Coated Grinding Disc is covered by Sealey's standard warranty terms and conditions. For specific details regarding warranty coverage, duration, and claims procedures, please refer to the warranty documentation provided with your original Sealey SMS2003 Saw Blade Sharpener or visit the official Sealey webஉத்தரவாத நோக்கங்களுக்காக உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.

9. ஆதரவு

For technical assistance, spare parts, or further information regarding the Sealey SMS2003.B Diamond Coated Grinding Disc or the SMS2003 Saw Blade Sharpener, please contact Sealey customer support. Contact details can typically be found in your product documentation or on the official Sealey webதளம்.

Webதளம்: www.sealey.co.uk

Please have the model number (SMS2003.B) and any relevant purchase information ready when contacting support.