அறிமுகம்
This manual provides detailed instructions for the installation, operation, and maintenance of your Audio-Technica AT3600L Moving Magnet Turntable Cartridge. The AT3600L is designed for high-fidelity audio reproduction and is compatible with turntables utilizing a standard half-inch mount headshell. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your cartridge.
தயாரிப்பு முடிந்துவிட்டதுview
The Audio-Technica AT3600L is a moving magnet cartridge featuring a durable design and a conical bonded diamond stylus. It is engineered to deliver clear and resonant sound reproduction for your vinyl records.
முக்கிய அம்சங்கள்:
- வகை: நகரும் காந்தம் (MM)
- மவுண்டிங்: Standard Half-inch mount (1/2" spacing)
- ஸ்டைலஸ்: 0.6mm Conical Bonded Diamond tip
- கான்டிலீவர்: Carbon fibre round tube for accurate sound reproduction
- கண்காணிப்பு படை: Recommended range of 2.5 - 3.5 grams
- வெளியீட்டு நிலை: 4.2mV @ 5cm/sec. @ 1Khz
- அதிர்வெண் வரம்பு: 20 - 20Khz
- ஏற்ற மின்மறுப்பு: 47 கே ஓம்
- சேனல் பிரிப்பு: 20dB @ 1Khz & 15dB @ 10Khz
- பரிமாணங்கள்: Approximately 2cm (H) x 3cm (L) x 1.6cm (W)
- எடை: 5.7 கிராம்
படம் 1: முன் view of the Audio-Technica AT3600L cartridge, showing the stylus assembly.
அமைவு மற்றும் நிறுவல்
Proper installation is crucial for optimal sound quality and to prevent damage to your records or equipment. The AT3600L is designed for turntables with a removable headshell and a standard half-inch mount.
- தயாரிப்பு:
- உங்கள் டர்ன்டேபிள் மின்சாரம் துண்டிக்கப்பட்டு, மின் இணைப்பிலிருந்து துண்டிக்கப்பட்டுள்ளதா என்பதை உறுதிப்படுத்திக் கொள்ளுங்கள்.
- Carefully remove the existing cartridge or headshell from the tonearm.
- Place the new AT3600L cartridge on a clean, stable surface.
- வயரிங் இணைப்புகள்:
The AT3600L has four pins at the rear for connection to the tonearm wires. These wires are typically color-coded:
- Red (R+): Right channel hot
- Green (R-): Right channel ground
- White (L+): Left channel hot
- Blue (L-): Left channel ground
Carefully connect the corresponding wires from your tonearm to the pins on the cartridge. Use tweezers if necessary to avoid bending the pins or damaging the wires. Ensure connections are firm but do not apply excessive force.
படம் 2: பின்புறம் view of the AT3600L cartridge, highlighting the four connection pins for tonearm wires.
- Mounting to Headshell:
Align the two mounting holes on the cartridge with the screw holes on your headshell. Secure the cartridge using the two screws provided with your headshell or turntable. Do not overtighten the screws; they should be snug enough to hold the cartridge firmly in place without stripping the threads.
Figure 3: The AT3600L cartridge with its protective stylus cover, ready for mounting onto a headshell.
- Alignment and Tracking Force:
After mounting, it is essential to properly align the cartridge and set the tracking force. Refer to your turntable's instruction manual for specific guidance on:
- Cartridge Alignment: Use an alignment protractor to ensure the stylus tracks correctly across the record groove.
- கண்காணிப்பு படை: Set the tracking force to the recommended range of 2.5 - 3.5 grams. A tracking force scale is recommended for accuracy. Incorrect tracking force can cause premature stylus wear or damage to records.
- எதிர்ப்பு ஸ்கேட்: Adjust the anti-skate setting on your tonearm to match the tracking force.
இயக்க வழிமுறைகள்
Once installed and properly adjusted, your Audio-Technica AT3600L cartridge is ready for use. Ensure your turntable is connected to a phono preampலைஃபையர் அல்லது ஒரு amplifier with a dedicated phono input (MM type).
- பதிவு இடம்: Place your vinyl record carefully on the turntable platter.
- Stylus Guard Removal: Gently remove the clear plastic stylus guard from the cartridge. Always remove and replace the guard with care to avoid damaging the stylus.
- Tonearm Operation: Use the tonearm lift lever to raise the tonearm. Position the tonearm over the desired starting groove of the record.
- ஸ்டைலஸைக் குறைத்தல்: Slowly lower the tonearm using the lift lever. The stylus will gently descend onto the record groove, and playback will begin. Avoid dropping the tonearm or stylus onto the record, as this can cause damage.
- Ending Playback: At the end of a record side, or when you wish to stop playback, use the tonearm lift lever to raise the tonearm. Return the tonearm to its rest and replace the stylus guard.
முக்கியமானது: Always replace the stylus guard when the turntable is not in use or when moving the turntable to protect the delicate stylus from accidental damage.
பராமரிப்பு
Regular maintenance ensures optimal performance and extends the life of your cartridge and records.
- ஸ்டைலஸ் சுத்தம் செய்தல்:
Clean the stylus regularly to remove dust and debris. Use a soft stylus brush, brushing gently from the back of the stylus towards the front (in the direction of play). Never brush from front to back or side to side, as this can damage the cantilever.
- பதிவு சுத்தம்:
Ensure your records are clean before playing. Dust and dirt on records can transfer to the stylus, degrading sound quality and accelerating wear.
- ஸ்டைலஸ் மாற்றீடு:
The stylus is a consumable part and will wear out over time. A worn stylus can damage your records and degrade sound quality. Replace the stylus (Audio-Technica ATN3600L) after approximately 300-500 hours of playback, or sooner if you notice a significant drop in sound quality or increased record wear. The stylus is user-replaceable by gently pulling the old stylus assembly forward and down, and then pushing the new one up and back into place until it clicks.
சரிசெய்தல்
If you experience issues with your AT3600L cartridge, consult the following common problems and solutions:
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| No sound or weak sound from one channel |
|
|
| Distorted or muffled sound |
|
|
| Skipping or jumping |
|
|
| ஹம்மிங் அல்லது சலசலப்பு சத்தம் |
|
|
விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| கெட்டி வகை | நகரும் காந்தம் (MM) |
| மவுண்டிங் | Half-inch mount |
| ஸ்டைலஸ் வகை | 0.6mm Conical Bonded Diamond |
| கான்டிலீவர் | Carbon fibre round tube |
| கண்காணிப்பு படை | 2.5 - 3.5 grams (recommended) |
| வெளியீட்டு நிலை | 4.2mV @ 5cm/sec. @ 1Khz |
| அதிர்வெண் பதில் | 20 - 20,000 ஹெர்ட்ஸ் |
| ஏற்ற மின்மறுப்பு | 47 கே ஓம் |
| சேனல் இருப்பு | 1.5 டி.பி |
| சேனல் பிரிப்பு | 20dB @ 1Khz & 15dB @ 10Khz |
| பரிமாணங்கள் (H x L x W) | தோராயமாக 2 செ.மீ x 3 செ.மீ x 1.6 செ.மீ. |
| எடை | 5.7 கிராம் |
| மாதிரி எண் | AT3600L (also referred to as AT3600) |
உத்தரவாதம் மற்றும் ஆதரவு
Audio-Technica products are manufactured to high standards and are backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Audio-Technica webதளம்.
For technical support, replacement parts (such as the ATN3600L stylus), or service inquiries, please contact your local Audio-Technica distributor or customer service center. Contact information can typically be found on the Audio-Technica webதளத்தில் அல்லது உங்கள் தயாரிப்பு பேக்கேஜிங்கில்.
திரும்பும் கொள்கை: This product is subject to a return policy, typically allowing for returns or replacements within 30 days of purchase, provided the item is in its original condition. Please consult your retailer's specific return policy for details.
