கேட்டா பி&க்யூ டிசைனர் குக் & லூயிஸ் குக்கர் ஹூட் கட்டுப்பாட்டு பட்டன் பிசிபி அறிவுறுத்தல் கையேடு

அறிமுகம்

This manual provides essential information for the safe and correct installation, operation, and maintenance of your Cata B&Q Designair Cooke & Lewis Cooker Hood Control Button PCB. This component is an original replacement part designed to restore the functionality of your cooker hood's control panel. Please read these instructions thoroughly before proceeding with installation or use.

பாதுகாப்பு தகவல்

Improper installation or repair can lead to electrical shock, fire, or other hazards. Always adhere to the following safety guidelines:

• மின் இணைப்பை துண்டிக்கவும்: Before attempting any installation, maintenance, or repair, ensure the cooker hood is completely disconnected from the main power supply. Turn off the circuit breaker or remove the fuse.
• தொழில்முறை நிறுவல் பரிந்துரைக்கப்படுகிறது: Installation of electrical components should ideally be performed by a qualified electrician or a competent person with experience in appliance repair.
• கவனத்துடன் கையாளவும்: The PCB contains sensitive electronic components. Avoid touching the circuit board directly with bare hands to prevent electrostatic discharge damage.
• சரியான கருவிகளைப் பயன்படுத்தவும்: Ensure you have the appropriate tools for the task, including insulated screwdrivers.
• இணக்கத்தன்மையை சரிபார்க்கவும்: Confirm that this replacement PCB is compatible with your specific cooker hood model before installation.

தொகுப்பு உள்ளடக்கங்கள்

பெறும்போது அனைத்து கூறுகளும் உள்ளனவா மற்றும் சேதமடையவில்லையா என்பதைச் சரிபார்க்கவும்:

• 1x Cata B&Q Designair Cooke & Lewis Cooker Hood Control Button PCB (Model 15100031)
• Mounting hardware (if applicable, as specified by the manufacturer)

இணக்கமான மாதிரிகள்

This control button PCB is compatible with the following cooker hood models:

• CHP60SS
• CHP70SS
• CHP90SS
• CLCH60SS-C
• CLCH90SS-C
• CLGCH60-C
• CLGCH90-C
• CTCG60
• FGHD62SS
• FGHD72SS

Always cross-reference the model number of your appliance to ensure correct part selection.

அமைவு மற்றும் நிறுவல்

Follow these steps carefully to replace the control button PCB. If you are unsure at any point, consult a qualified technician.

1. நிறுவலுக்கு தயாராகுங்கள்:
   • Ensure the cooker hood is completely disconnected from the main power supply.
   • Gather necessary tools: screwdrivers (Phillips and flathead), possibly pliers, and a camera to document wiring.
2. Access the Existing PCB:
   • Depending on your cooker hood model, you may need to remove filters, light covers, or decorative panels to access the control panel assembly. Refer to your cooker hood's specific service manual for detailed access instructions.
   • Carefully locate the existing control button PCB.
3. ஆவண வயரிங்:
   • Before disconnecting any wires, take clear photographs of all wire connections to the old PCB. Note the color and position of each wire. This is crucial for correct reassembly.
4. Disconnect the Old PCB:
   • Carefully disconnect all wires from the old PCB. Note if any connectors are unique or keyed.
   • Unscrew or unclip the old PCB from its mounting points.
5. Install the New PCB:
   • Position the new control button PCB (Model 15100031) in the same location as the old one.
   • Secure the new PCB using the original screws or clips. Ensure it is firmly seated.
   

   Image 1: The Cata B&Q Designair Cooke & Lewis Cooker Hood Control Button PCB (Model 15100031) with its integrated wiring harness. This image shows the main body of the PCB and the multi-colored wires extending from it, ready for connection.

6. வயரிங் மீண்டும் இணைக்கவும்:
   • Using your photographs and notes, carefully reconnect all wires to the new PCB. Ensure each wire is connected to its correct terminal. Double-check all connections for security.
   

   படம் 2: மேல் view of the control button assembly, showing the five metallic buttons and the main housing. This perspective highlights the user interface aspect of the PCB.

   

   படம் 3: கோணல் view of the control button assembly, providing a clearer look at the side profile and the connection points for the wiring harness. This view helps in understanding how the buttons integrate with the PCB.

7. Reassemble the Cooker Hood:
   • Once all connections are secure, reattach any panels, light covers, or filters that were removed.
8. சக்தியை மீட்டெடுத்து சோதிக்கவும்:
   • Restore power to the cooker hood at the main circuit breaker.
   • Test all functions of the control panel (fan speeds, lights, etc.) to ensure the new PCB is working correctly.

இயக்க வழிமுறைகள்

This PCB controls the various functions of your cooker hood via its integrated buttons. Once installed, the operation should be intuitive and consistent with your cooker hood's original design.

• பவர் ஆன்/ஆஃப்: Typically, one button controls the main power to the fan and lights.
• மின்விசிறி வேகத் தேர்வு: Multiple buttons or a single button with sequential presses will adjust the fan speed (e.g., Low, Medium, High).
• ஒளி கட்டுப்பாடு: A dedicated button usually controls the cooker hood's lighting.

Refer to your cooker hood's primary user manual for specific button functions and operational sequences.

பராமரிப்பு

The control button PCB itself requires minimal maintenance. However, proper care of the surrounding control panel can extend its lifespan.

• கண்ட்ரோல் பேனலை சுத்தம் செய்தல்: Ensure the cooker hood is powered off before cleaning. Use a soft, damp cloth with a mild, non-abrasive cleaner to wipe the surface of the control panel. Avoid spraying liquids directly onto the buttons or gaps.
• அதிகப்படியான சக்தியைத் தவிர்க்கவும்: Do not press the buttons with excessive force, as this can damage the internal mechanisms or the PCB.

சரிசெய்தல்

If you encounter issues after installing the new PCB, consider the following common troubleshooting steps:

If troubleshooting steps do not resolve the issue, it is recommended to contact a qualified service technician.

விவரக்குறிப்புகள்

உத்தரவாதம் மற்றும் ஆதரவு

For information regarding warranty coverage, returns, or technical support, please refer to the original purchase documentation or contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.