இன்டர்மெக் PM43 நேரடி வெப்ப/வெப்ப பரிமாற்ற அச்சுப்பொறி பயனர் கையேடு

1. அறிமுகம்

The Intermec PM43 is a mid-range industrial label printer designed for reliable performance and ease of use. This printer supports both direct thermal and thermal transfer printing methods, making it versatile for various labeling applications. It features a user-friendly interface, available with either a color touch-screen or universal icons, to simplify operation and reduce training requirements. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your PM43 printer.

படம் 1: முன் view of the Intermec PM43 printer, showing the control panel and media output slot.

2 அமைவு

2.1 பேக்கிங் மற்றும் பிளேஸ்மெண்ட்

Carefully remove the printer from its packaging. Ensure all packing materials are removed. Place the printer on a stable, flat surface with adequate space around it for ventilation and access to ports and media loading areas.

2.2 இணைக்கும் சக்தி

1. Ensure the printer's power switch is in the OFF (O) position.
2. Connect the power cord to the printer's AC inlet.
3. பவர் கார்டின் மறுமுனையை தரையிறக்கப்பட்ட மின் நிலையத்தில் செருகவும்.

2.3 Connecting to a Host System

The PM43 printer supports USB and Ethernet connectivity.

• USB இணைப்பு: அச்சுப்பொறியின் USB போர்ட்டிலிருந்து ஒரு USB கேபிளை உங்கள் கணினியில் கிடைக்கும் USB போர்ட்டுடன் இணைக்கவும்.
• ஈதர்நெட் இணைப்பு: அச்சுப்பொறியின் ஈதர்நெட் போர்ட்டிலிருந்து உங்கள் நெட்வொர்க் ரூட்டர் அல்லது சுவிட்சுடன் ஈதர்நெட் கேபிளை இணைக்கவும்.

Figure 2: Rear panel of the PM43 printer, illustrating the power inlet, power switch, USB ports, and Ethernet port.

2.4 மீடியாவை ஏற்றுகிறது

The PM43 printer can use various media types, including labels, tags, and continuous media. For thermal transfer printing, a ribbon is also required.

1. Open the printer's media cover.
2. Place the roll of labels onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
3. Thread the media through the guides and under the printhead assembly.
4. If using thermal transfer, load the ribbon onto the ribbon supply spindle and thread it according to the internal diagrams.
5. ஊடக அட்டையை மூடு.

படம் 3: உள் view of the PM43 printer, highlighting the media and ribbon loading mechanisms.

3. இயக்க வழிமுறைகள்

3.1 பவர் ஆன்/ஆஃப்

• To power on, flip the power switch on the rear panel to the ON (I) position. The printer will perform a self-test.
• To power off, flip the power switch to the OFF (O) position.

3.2 அடிப்படை அச்சிடுதல்

Once the printer is connected and media is loaded, you can send print jobs from your host system. Ensure the correct printer drivers are installed on your computer.

1. Open the document or application from which you wish to print.
2. Select the Intermec PM43 printer from the print dialog.
3. Adjust print settings (e.g., label size, print density) as needed.
4. அச்சுப் பணியைத் தொடங்குங்கள்.

3.3 Using the User Interface

The PM43 features either a color touch-screen or a universal-icon interface for direct control and configuration. Navigate through menus to adjust settings such as media calibration, network configuration, and printer status.

4. பராமரிப்பு

4.1 அச்சுப்பொறியை சுத்தம் செய்தல்

Regular cleaning of the printhead is crucial for maintaining print quality and extending the printhead's lifespan. Use a lint-free cloth or a printhead cleaning pen with isopropyl alcohol.

1. Power off the printer and disconnect the power cord.
2. ஊடக அட்டையைத் திறக்கவும்.
3. Gently wipe the printhead element from the center outwards.
4. Allow the printhead to dry completely before closing the cover and powering on the printer.

4.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Refer to section 2.4 for loading instructions. Always ensure the correct media and ribbon types are used for optimal performance.

5. சரிசெய்தல்

This section addresses common issues you might encounter with your PM43 printer.

5.1 மோசமான அச்சுத் தரம்

• Faded or incomplete print: Clean the printhead (see section 4.1). Ensure the ribbon (if thermal transfer) is correctly loaded and not depleted. Adjust print density settings.
• Smudged print: Verify media type is compatible. Ensure printhead pressure is correctly set.

5.2 Media Jams

• அச்சுப்பொறியை அணைக்கவும்.
• Open the media cover and carefully remove any jammed media.
• Ensure media is loaded correctly and guides are properly adjusted.
• Close the cover and power on.

5.3 இணைப்பு சிக்கல்கள்

• Printer not detected: Check all cable connections (USB/Ethernet). Restart the printer and host system. Verify driver installation.
• நெட்வொர்க் சிக்கல்கள்: Confirm network cable is connected. Check network settings on the printer and host system.

6. விவரக்குறிப்புகள்

The following table outlines the key technical specifications for the Intermec PM43 printer.

Figure 4: Regulatory and compliance labels found on the Intermec PM43 printer.

7. உத்தரவாதத் தகவல்

The Intermec PM43 printer is covered by a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermec support webதளம்.

8. ஆதரவு

For further assistance, technical support, or to download the latest drivers and firmware, please visit the official Intermec support website or contact your authorized Intermec dealer. Ensure you have your printer's model number (PM43A01000000201) and serial number available when seeking support.