AntMiner S9 Instruction Manual

1. தயாரிப்பு முடிந்துவிட்டதுview

The AntMiner S9 is a high-performance ASIC (Application-Specific Integrated Circuit) miner designed for Bitcoin mining. It features a hash rate of approximately 13.5 TH/s and is known for its power efficiency. This manual provides essential information for the proper setup, operation, and maintenance of your AntMiner S9.

படம் 1.1: முன் பக்கம் view of the AntMiner S9, showcasing its compact design and integrated cooling fans.

2. பாதுகாப்பு தகவல்

• Ensure the power supply unit (PSU) is connected to a stable power source.
• Do not connect more than one PSU to the same hash board to prevent potential damage and instability.
• Operate the miner within the specified temperature range of 0 °C to 40 °C.
• Keep the device away from water, moisture, and high humidity.
• Do not attempt to open or modify the miner, as this may void the warranty and pose safety risks.
• Ensure adequate ventilation around the miner to prevent overheating.

3. தொகுப்பு உள்ளடக்கங்கள்

தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

• AntMiner S9 ASIC Bitcoin Miner
• பவர் சப்ளை யூனிட் (PSU)
• பவர் கார்ட்

4. அமைவு வழிகாட்டி

4.1 மின் இணைப்பு

The AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input. These connectors must be supplied by a very stable power source.

1. Locate the three hash boards, each requiring three 6-pin PCI-e connectors.
2. Locate the controller board, which requires one additional 6-pin PCI-e connector.
3. Connect all TEN 6-pin PCI-e connectors from the power supply unit to the respective ports on the miner.
4. அனைத்து இணைப்புகளும் பாதுகாப்பானவை என்பதை உறுதிப்படுத்தவும்.
5. Connect the power cord from the PSU to a suitable electrical outlet.

முக்கிய குறிப்பு:

• Bitmain recommends the APW3 power supply for 205-264V outlets. For voltages lower than 205V, use the EVGA 1600 G2.
• Power consumption figures are dependent on PSU efficiency, ambient operating temperature, and power meter accuracy.

Image 4.1: Front panel of the AntMiner S9, showing the Ethernet port, IP Report button, SD card slot, and status indicator lights.

4.2 பிணைய இணைப்பு

The AntMiner S9 connects to your network via an Ethernet cable.

1. Connect one end of an Ethernet cable to the ETH port on the AntMiner S9.
2. ஈதர்நெட் கேபிளின் மறுமுனையை உங்கள் ரூட்டர் அல்லது நெட்வொர்க் சுவிட்சுடன் இணைக்கவும்.
3. Once connected, the miner will automatically obtain an IP address via DHCP.

5. இயக்க வழிமுறைகள்

5.1 அணுகல் Web மேலாண்மை போர்டல்

The AntMiner S9 features a built-in web management portal, eliminating the need for a separate host computer for configuration.

1. Ensure the miner is powered on and connected to your network.
2. To find the miner's IP address, you can use an IP scanner tool on your network or press the "IP Report" button on the miner. Hold the button for 5 seconds until you hear a beep. The IP address will be reported to the IP Reporter tool (available from Antminer support).
3. திற a web ஒரே நெட்வொர்க்குடன் இணைக்கப்பட்ட கணினியில் உலாவி.
4. Enter the miner's IP address into the browser's address bar and press Enter.
5. You will be prompted for login credentials. The default username and password are typically "root" and "root" (or "admin" and "admin"). Refer to the latest Antminer documentation for default credentials.
6. Once logged in, you can configure mining pool settings, monitor performance, and update firmware.

படம் 5.1: பக்கம் view of the AntMiner S9, illustrating its robust casing and fan placement.

5.2 Configuring Mining Pools

உள்ளே web management portal, navigate to the "Miner Configuration" or "Pool Settings" section to enter your mining pool details. You will typically need to provide:

• குளம் URL: The address of your chosen mining pool.
• Worker Name: Your worker name, usually in the format username.workername.
• கடவுச்சொல்: The password for your worker (often 'x' or a specific password set on the pool).

It is recommended to configure at least two mining pools (primary and backup) for continuous operation.

6. பராமரிப்பு

• தூசி அகற்றுதல்: Regularly inspect and clean the cooling fans and heat sinks to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for effective cleaning.
• சுற்றுச்சூழல் கட்டுப்பாடு: Maintain a stable operating environment with good airflow and within the recommended temperature range (0 °C to 40 °C).
• நிலைபொருள் புதுப்பிப்புகள்: Periodically check the official Antminer website for firmware updates. Keeping the firmware updated can improve performance and stability.
• பவர் சப்ளை சோதனை: Ensure the power supply unit is functioning correctly and providing stable voltage.

7. சரிசெய்தல்

For more complex issues, refer to the official Antminer support resources or contact customer support.

8. விவரக்குறிப்புகள்

9. உத்தரவாதம் மற்றும் ஆதரவு

This product is covered by the manufacturer's warranty. For any issues covered under the manufacturer warranty, please handle them directly with the manufacturer. The seller's return policy may involve restocking fees if troubleshooting and technical support are not sought prior to a return.

For technical assistance, troubleshooting, or warranty claims, please contact the manufacturer or your seller's support channels. It is often possible to resolve issues quickly without needing to return the unit.

Legal Disclaimer: By purchasing this product, you agree to seek troubleshooting and technical support from the seller and/or manufacturer before attempting a return. Returns without seeking technical support and troubleshooting may be subject to restocking fees.