True Mfg T-49F-HC 2-Door Reach-In Freezer User Manual

அறிமுகம்

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your True Mfg T-49F-HC 2-Door Reach-In Freezer. Please read this manual thoroughly before operating the unit and retain it for future reference.

தயாரிப்பு முடிந்துவிட்டதுview

படம் 1: True Mfg T-49F-HC 2-Door Reach-In Freezer. This image displays the full unit, highlighting its stainless steel construction, two self-closing doors with recessed handles, and the bottom-mounted refrigeration system with a louvered panel for air intake.

The True Mfg T-49F-HC is a commercial-grade, two-door reach-in freezer designed for professional food service environments. It features a high tensile strength stainless steel exterior and an NSF approved aluminum interior liner with a stainless steel floor. The unit is engineered to maintain cabinet temperatures of -10°F, ensuring optimal preservation of frozen goods. It utilizes eco-friendly R290 refrigerant and is UL listed and NSF-7 Compliant.

அமைவு மற்றும் நிறுவல்

பேக்கிங்

• டேப் மற்றும் பாதுகாப்பு படலங்கள் உட்பட அனைத்து பேக்கேஜிங் பொருட்களையும் கவனமாக அகற்றவும்.
• Inspect the unit for any shipping damage. Report any damage immediately to the carrier and your supplier.
• Retain packaging materials for potential future shipping or claims.

வேலை வாய்ப்பு

• Position the freezer on a strong, level surface capable of supporting its weight when fully loaded.
• Ensure adequate air circulation around the unit. Maintain a minimum of 6 inches (15 cm) of clearance from walls and other equipment for proper ventilation of the condenser.
• வெப்ப மூலங்களுக்கு அருகில் (எ.கா. அடுப்புகள், நேரடி சூரிய ஒளி) அல்லது அதிக ஈரப்பதம் உள்ள பகுதிகளில் அலகு வைப்பதைத் தவிர்க்கவும்.
• The unit comes with casters for mobility; ensure they are locked once the unit is in its final position.

மின்சார இணைப்பு

• The freezer requires a dedicated 115V/60Hz/1-ph electrical outlet.
• The unit is equipped with a 9 ft cord and a NEMA 5-15P plug.
• நீட்டிப்பு வடங்கள் அல்லது அடாப்டர் செருகிகளைப் பயன்படுத்த வேண்டாம்.
• Ensure the electrical supply matches the requirements listed on the unit's data plate.

இயக்க வழிமுறைகள்

ஆரம்ப தொடக்கம்

• After positioning and connecting to power, allow the unit to sit for at least 2 hours before turning it on. This allows refrigerants to settle.
• Turn on the unit using the power switch, typically located near the control panel.
• Allow the freezer to reach its operating temperature of -10°F before loading products. This may take several hours.

வெப்பநிலை கட்டுப்பாடு

• The digital temperature display and controls are located on the top front of the unit.
• Refer to the specific control panel instructions for adjusting temperature settings. The factory preset is -10°F.
• Avoid frequent temperature adjustments.

தயாரிப்புகளை ஏற்றுகிறது

• Distribute products evenly on the six adjustable, heavy-duty PVC coated wire shelves.
• Do not block air vents inside the cabinet, as this can impede airflow and affect cooling efficiency.
• Avoid overloading shelves beyond their rated capacity.

கதவு செயல்பாடு

• The unit features self-closing, positive sealing swing doors.
• Ensure doors close completely after each use to maintain temperature and energy efficiency.
• The doors are equipped with 12-inch long recessed handles and locks for security.

பராமரிப்பு

வழக்கமான சுத்தம்

• வெளிப்புறம்: Clean the stainless steel exterior regularly with a mild soap and water solution and a soft cloth. Wipe in the direction of the grain. Avoid abrasive cleaners or scouring pads.
• உட்புறம்: Clean the NSF approved aluminum interior liner and stainless steel floor with a mild, non-abrasive cleaner. Rinse with clean water and dry thoroughly.
• அலமாரிகள்: Remove and clean the PVC coated wire shelves as needed.

Condenser Coil Cleaning (Monthly/Quarterly)

The condenser coil, located at the bottom of the unit, accumulates dust and debris, which can reduce efficiency and lead to compressor failure. Clean it regularly:

1. மின்சார விநியோகத்திலிருந்து அலகு துண்டிக்கவும்.
2. Locate the louvered panel at the bottom front of the unit and remove it.
3. Use a stiff brush or vacuum cleaner with a brush attachment to remove dust and lint from the condenser fins. Be careful not to bend the fins.
4. Replace the louvered panel and reconnect power.

Door Gasket Inspection

• Regularly inspect the door gaskets for cracks, tears, or signs of wear.
• Ensure gaskets form a tight seal when the doors are closed. A poor seal can lead to temperature fluctuations and increased energy consumption.
• Clean gaskets with warm, soapy water. Replace damaged gaskets promptly.

சரிசெய்தல்

சேவையைத் தொடர்புகொள்வதற்கு முன், மீண்டும்view பின்வரும் பொதுவான சிக்கல்கள் மற்றும் தீர்வுகள்:

இந்த தீர்வுகளை முயற்சித்த பிறகும் சிக்கல் தொடர்ந்தால், தயவுசெய்து ஒரு தகுதிவாய்ந்த சேவை தொழில்நுட்ப வல்லுநரைத் தொடர்பு கொள்ளவும்.

விவரக்குறிப்புகள்

உத்தரவாதம் மற்றும் ஆதரவு

உத்தரவாத தகவல்

• 3-Year Warranty on Labor: Covers labor costs for repairs due to manufacturing defects.
• 3-Year Warranty on Parts: Covers replacement parts due to manufacturing defects.
• Additional 2 Years (5 Years Total) on Compressor: Extends compressor warranty to a total of five years.

For detailed warranty terms and conditions, please refer to the official True Manufacturing warranty document or contact True customer service.

வாடிக்கையாளர் ஆதரவு

For technical assistance, parts, or warranty claims, please contact True Manufacturing customer support. Have your model number (T-49F-HC) and serial number ready when you call.

நீங்கள் அதிகாரியையும் பார்வையிடலாம் TRUE Store on Amazon மேலும் தகவல் மற்றும் தயாரிப்பு வளங்களுக்கு.