1. அறிமுகம்
This manual provides essential information for the proper installation, operation, and maintenance of your Alphacool Eispumpe VPP755 with Eisdecke D5 V.3 Pump/Res Combo. Please read this manual thoroughly before beginning installation to ensure safe and efficient use of the product.
Figure 1: Alphacool Eispumpe VPP755 with Eisdecke D5 V.3 Pump/Res Combo, showing the pump unit integrated into the acetal reservoir top.
2. பாதுகாப்பு தகவல்
- திரவ இணக்கத்தன்மை: Use only clear, transparent water cooling fluids. Fluids containing particles or additives (e.g., Pastel fluids) can clog and permanently damage water cooling components such as radiators, pumps, and blocks. Use of such fluids may void the manufacturer's warranty.
- Impeller Handling: Removing the impeller from the ceramic shaft will cause the upper ceramic clamping ring to over-expand, leading to its destruction. This action will void the pump's warranty. If the pump is reassembled after such removal, the clamping ring will loosen, which is not accepted as grounds for return or exchange.
- தொகுதிtage: மின்சாரம் வழங்கல் தொகுதியை உறுதி செய்யவும்tage is within the permitted range of 8-13V DC.
- வெப்பநிலை: Do not exceed the maximum system temperature of 65°C.
3. தொகுப்பு உள்ளடக்கங்கள்
பின்வரும் பொருட்கள் விநியோக நோக்கத்தில் சேர்க்கப்பட்டுள்ளன:
- 1x Alphacool Eispumpe VPP755 - G1/4 IT
- 1x Eisdecke D5 - Acetal V.3
4. அமைவு மற்றும் நிறுவல்
4.1 இயற்பியல் நிறுவல்
The pump/res combo can be mounted using the integrated brackets. Ensure stable placement within your system to prevent vibration and stress on connections.
படம் 2: பக்கம் view of the pump/res combo, illustrating the mounting brackets for secure installation.
4.2 போர்ட் இணைப்புகள்
The Eisdecke D5 V.3 features multiple G1/4" threads for flexible integration into your water cooling loop. Identify the IN (inlet) and OUT (outlet) ports as labeled on the unit for correct flow direction.
படம் 3: மேல் view of the Eisdecke D5 V.3, highlighting the G1/4" inlet (IN) and outlet (OUT) ports for tubing connections.
4.3 மின் இணைப்புகள்
Connect the pump to your power supply and motherboard using the provided cables:
- 4-pin Molex: For main power supply to the pump.
- 3-pin Tach Signal: Connect to a motherboard fan header to monitor pump RPM.
- 4-pin PWM Signal: Connect to a motherboard PWM fan header for speed control.
Figure 4: The power and signal cables for the VPP755 pump, including the 4-pin Molex, 3-pin tachometer, and 4-pin PWM connectors.
5. இயக்க வழிமுறைகள்
The Alphacool Eispumpe VPP755 features an adjustable speed setting, allowing you to optimize performance and noise levels for your specific cooling needs.
5.1 அனுசரிப்பு நிலைகள்
The pump can be adjusted in five distinct levels, controlling the rotational speed (RPM):
- நிலை 1: 1800 ஆர்பிஎம்
- நிலை 2: 2500 ஆர்பிஎம்
- நிலை 3: 3200 ஆர்பிஎம்
- நிலை 4: 3900 ஆர்பிஎம்
- நிலை 5: 4500 ஆர்பிஎம்
Adjust the level according to your system's cooling requirements and desired noise profile. Higher levels provide greater flow rate and pressure.
6. பராமரிப்பு
Regular maintenance is crucial for the longevity and performance of your water cooling system. Ensure to use only clear, transparent water cooling fluids. Avoid fluids with particles or additives, as they can cause blockages and damage to the pump and other components. Periodically inspect your loop for any signs of debris or fluid discoloration.
7. சரிசெய்தல்
If you experience issues with your pump, consider the following:
- No Power/No Operation: Check all electrical connections (4-pin Molex, 3-pin tach, 4-pin PWM) to ensure they are securely seated and receiving power. Verify your power supply is functioning correctly.
- Reduced Flow/Noise: This could indicate air in the loop or a blockage. Bleed the system thoroughly to remove air. If using non-compatible fluids, a blockage may have occurred.
- Impeller Issues: As stated in the safety information, do not attempt to remove the impeller from the ceramic shaft. Doing so will damage the clamping ring and void the warranty. If the pump exhibits unusual noises or performance issues after unauthorized disassembly, it is likely damaged beyond repair and not covered by warranty.
8. தொழில்நுட்ப விவரக்குறிப்புகள்
8.1 VPP755 Eispumpe
| அம்சம் | விவரக்குறிப்பு |
|---|---|
| Dimensions (DxH) | 60 x 53.5 மிமீ |
| கேபிள் நீளம் | 50 செ.மீ |
| நிலையான தொகுதிtage | 12V DC |
| மின் நுகர்வு | 14W |
| அனுமதிக்கப்பட்ட தொகுதிtage | 8-13 வி டி.சி. |
| Pressure at 12V | 4m water head |
| அதிகபட்ச ஓட்ட விகிதம் | 350லி/ம |
| Pump Medium | Water, water/glycol mixture |
| அதிகபட்ச கணினி வெப்பநிலை | 65°C |
| மின் இணைப்பு | 4-முள் மோலெக்ஸ் |
| Tach Signal | 3-முள் |
| பி.டபிள்யூ.எம் சிக்னல் | 4-முள் |
| சரிசெய்யக்கூடிய நிலைகள் | 5 levels (1800-4500 RPM) |
8.2 Eisdecke D5 V.3
| அம்சம் | விவரக்குறிப்பு |
|---|---|
| பரிமாணங்கள் | 80 x 80 x 40 மிமீ |
| Dimensions with Stands | 83 x 80 x 87 மிமீ |
| பொருள் | அசிடால் |
| இணைப்புகள் | 5x 1/4" threads |
Figure 5: Dimensional drawing of the Alphacool Eispumpe VPP755 with Eisdecke D5 V.3, showing key measurements for integration.
9. உத்தரவாதம் மற்றும் ஆதரவு
The manufacturer's warranty for the Alphacool Eispumpe VPP755 with Eisdecke D5 V.3 Pump/Res Combo is subject to specific conditions. Please note the following:
- Impeller Removal: Any attempt to remove the impeller from the ceramic shaft will result in damage to the internal clamping ring and will immediately void the pump's warranty.
- திரவ பயன்பாடு: Use of non-compatible fluids, particularly those containing particles or additives (e.g., Pastel fluids), can cause permanent damage to the pump and other water cooling components, potentially voiding the manufacturer's warranty.
For technical support or warranty inquiries, please refer to the official Alphacool website or contact their customer service directly. Always provide your product model number (13305) and proof of purchase when seeking support.
