Skytech 9800332 TS/R-2 Wireless Wall Mounted LCD Fireplace Remote Control Thermostat

அறிமுகம்

The Skytech 9800332 TS/R-2 system is designed to provide a safe, reliable, and user-friendly remote control solution for gas heating appliances. This manual will guide you through the installation, operation, and maintenance of your new wireless thermostat system.

முக்கியமான பாதுகாப்பு தகவல்

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in property damage, personal injury, or death. Keep this manual for future reference.

• Ensure all wiring is performed by a qualified professional if you are unsure.
• Always turn off the gas supply to the appliance before performing any installation or maintenance.
• Do not expose the remote control or receiver to water or extreme temperatures.
• Replace batteries regularly to ensure proper operation and prevent leakage.
• This system is intended for use with gas heating appliances only.

தொகுப்பு உள்ளடக்கங்கள்

உங்கள் தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

• டிரான்ஸ்மிட்டர் (ரிமோட் கண்ட்ரோல்)
• ரிசீவர் பெட்டி
• சுவர் கிளிப்
• சுவர் தட்டு
• நிறுவல் வழிமுறைகள்
• Batteries (for transmitter and receiver)
• Temperature Sensor (integrated into the transmitter)

தயாரிப்பு முடிந்துவிட்டதுview

The Skytech 9800332 TS/R-2 is a wireless, wall-mounted thermostat system designed for convenient control of your fireplace. It features a clear LCD display and simple three-button operation.

படம் 1: Skytech 9800332 TS/R-2 Wireless Thermostat. The unit features an LCD screen displaying '72°F' and 'ROOM SET TEMP', with 'SKYTECH' branding below. At the bottom are three buttons: an 'ON' arrow button, a 'SET' button, and an 'OFF' arrow button.

முக்கிய அம்சங்கள்:

• 3-Button On/Set/Off wall mounted thermostat with LCD display
• LCD displays room and thermostat set temperature in °F or °C
• Battery powered receiver box with learn function and On/Remote/Off slider switch
• Receiver can be installed in wall, on the hearth or under the fireplace behind the control access panel
• Lighted display for easy viewing
• குறைந்த பேட்டரி காட்டி

அமைவு மற்றும் நிறுவல்

1. பேட்டரி நிறுவல்

Install the provided batteries into both the transmitter (remote control) and the receiver box. Ensure correct polarity.

2. பெறுநர் இடம்

The receiver box can be installed in various locations:

• Inside the wall (using the wall plate)
• On the hearth
• Under the fireplace, behind the control access panel

Ensure the receiver is placed in a location where it can receive signals from the transmitter and is not exposed to excessive heat.

3. பெறுநரை வயரிங் செய்தல்

Connect the receiver to your gas heating appliance's control valve according to the appliance manufacturer's instructions. Typically, this involves connecting two low-voltage wires from the receiver to the appliance's millivolt or 24V control terminals. Consult a qualified technician if you are unsure about wiring.

4. Pairing (Learn Function)

டிரான்ஸ்மிட்டர் மற்றும் ரிசீவர் இடையே தொடர்பை ஏற்படுத்த:

1. Locate the "LEARN" button on the receiver box.
2. Press and hold the "LEARN" button until you hear a beep or see an indicator light flash.
3. Within 20 seconds, press any button on the transmitter.
4. The receiver will beep or flash again to confirm successful pairing.

Test the connection by pressing the ON/OFF buttons on the transmitter.

இயக்க வழிமுறைகள்

1. பவர் ஆன்/ஆஃப்

• To turn the fireplace ON, press the ON (Up Arrow) டிரான்ஸ்மிட்டரில் உள்ள பொத்தான்.
• To turn the fireplace OFF, press the OFF (Down Arrow) டிரான்ஸ்மிட்டரில் உள்ள பொத்தான்.

2. வெப்பநிலையை அமைத்தல்

The LCD displays both the current room temperature and the set temperature.

1. அழுத்தவும் அமைக்கவும் button once. The set temperature will flash.
2. பயன்படுத்தவும் ON (Up Arrow) or OFF (Down Arrow) விரும்பிய வெப்பநிலையை சரிசெய்ய பொத்தான்கள்.
3. அழுத்தவும் அமைக்கவும் again to confirm, or wait a few seconds for the setting to automatically save.

3. Switching Between °F and °C

வெப்பநிலை காட்சி அலகு மாற்ற:

• With the display showing the room temperature, press and hold the அமைக்கவும் button for approximately 5 seconds until the unit changes.

4. Receiver Slider Switch

The receiver box has a slider switch with three positions:

• On: Manually turns the fireplace ON, bypassing the remote control.
• அகற்று: Allows the fireplace to be controlled by the wireless transmitter. This is the standard operating position.
• முடக்கு: Manually turns the fireplace OFF, bypassing the remote control.

பராமரிப்பு

பேட்டரி மாற்று

When the low battery indicator appears on the LCD, or if the system becomes unresponsive, replace the batteries in both the transmitter and receiver. Use fresh alkaline batteries of the specified type (refer to specifications). Dispose of old batteries responsibly.

சுத்தம் செய்தல்

Wipe the surfaces of the transmitter and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.

சரிசெய்தல்

விவரக்குறிப்புகள்

உத்தரவாதம் மற்றும் ஆதரவு

For warranty information and technical support, please refer to the documentation included with your purchase or contact SkyTech customer service directly. Keep your proof of purchase for warranty claims.

உற்பத்தியாளர்: ஸ்கைடெக்