டோனர் DWS-3 UHF வயர்லெஸ் கிட்டார் சிஸ்டம் வழிமுறை கையேடு

அறிமுகம்

Thank you for choosing the Donner DWS-3 UHF Wireless Guitar System. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

தயாரிப்பு முடிந்துவிட்டதுview

முக்கிய அம்சங்கள்:

• Ultra-short latency: Less than 2.5ms for high-quality tone.
• Extended range: Over 100 feet (approximately 30 meters) for uncompressed wireless transmission.
• Long battery life: Built-in rechargeable lithium battery provides up to 6 hours of continuous use.
• Multiple channels: Supports 4 sets of devices operating simultaneously without interference.
• Rotatable plug: 225° rotatable 1/4" plug for compatibility with various electric instruments.

கூறுகள்:

The Donner DWS-3 system includes a transmitter (DWS-3T) and a receiver (DWS-3R).

Figure 1: Donner DWS-3T Transmitter (left) and DWS-3R Receiver (right).

Each unit features a 1/4" jack, power switch, channel selection button, and LED indicators for battery and channel status.

அமைவு

1. Charging the Units:

The DWS-3 units are equipped with built-in rechargeable lithium batteries. Before initial use, fully charge both the transmitter and receiver.

• Connect the provided USB charging cable to the Micro USB port on each unit.
• USB கேபிளின் மறுமுனையை இணக்கமான USB பவர் அடாப்டரில் (சேர்க்கப்படவில்லை) அல்லது கணினியின் USB போர்ட்டில் செருகவும்.
• முழுமையாக சார்ஜ் செய்ய சுமார் 2 மணிநேரம் ஆகும்.
• LED indicators will show charging status and battery level.

Figure 2: The included USB charging cable for the DWS-3 units.

2. கருவியுடன் இணைத்தல் மற்றும் Ampஆயுள்:

1. Transmitter (DWS-3T): Plug the transmitter into your electric instrument's output jack (e.g., electric guitar, bass, electric-acoustic guitar). The 225° rotatable plug allows for optimal positioning on various instrument body shapes.
2. Receiver (DWS-3R): Plug the receiver into the input jack of your amplifier, effects pedal, or audio interface.

Figure 3: Transmitter connected to a guitar and receiver connected to an ampஆயுள்.

3. Pairing and Channel Selection:

The DWS-3 units are typically pre-paired from the factory. If re-pairing is needed or to change channels:

1. Turn on both the transmitter and receiver using their respective power switches.
2. Press the "CH SEL" (Channel Select) button on both the transmitter and receiver simultaneously until their channel indicators match (CH1, CH2, CH3, or CH4).
3. The units will automatically pair on the selected channel. A solid green light on the RX indicator (receiver) and TX indicator (transmitter) confirms a successful connection.

Figure 4: LED indicators for channel selection and battery status on the DWS-3 units.

The DWS-3 supports up to 4 sets of devices working simultaneously. Ensure each set is on a different channel to avoid interference.

Figure 5: Illustration of multiple DWS-3 systems operating on separate channels.

இயக்க வழிமுறைகள்

Once the transmitter and receiver are connected, you can begin playing your instrument wirelessly. The system provides uncompressed signal transmission with minimal latency.

Adjusting the Plug:

The 1/4" plug on both units can rotate 225 degrees. This feature allows you to position the units optimally, preventing them from interfering with your playing or the instrument's controls.

Figure 6: The 225° rotatable plug for flexible positioning.

பராமரிப்பு

பேட்டரி பராமரிப்பு:

• To prolong battery life, avoid completely draining the units regularly.
• Charge the units when the battery indicator shows low power.
• If storing the units for an extended period, ensure they are partially charged (around 50%) to prevent battery degradation.

சுத்தம்:

Wipe the units with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish.

சரிசெய்தல்

• No Sound/Intermittent Signal:
  • Ensure both units are powered on and fully charged.
  • Verify that the transmitter and receiver are paired to the same channel.
  • Check for potential interference from other wireless devices (Wi-Fi routers, other wireless systems). Try switching to a different channel.
  • Ensure the units are within the 100-foot operating range and there are no major obstructions.
• Static or Noise:
  • Change the operating channel to avoid interference.
  • Ensure the units are not too close to strong electromagnetic fields.
  • Check the instrument's output and amplifier's input for any issues.
• குறுகிய பேட்டரி ஆயுள்:
  • Ensure the units are fully charged before use (approx. 2 hours).
  • அதிக நேரம் பயன்படுத்துவதால் பேட்டரி செயல்திறன் காலப்போக்கில் குறையக்கூடும்.

விவரக்குறிப்புகள்

அதிகாரப்பூர்வ தயாரிப்பு வீடியோக்கள்

The following videos are provided by the manufacturer to assist with product understanding and usage.

உத்தரவாதம் மற்றும் ஆதரவு

Specific warranty details for the Donner DWS-3 Wireless Guitar System are not provided in the product information. Please refer to the official Donner website or contact customer support for detailed warranty information and support services.

மேலும் உதவிக்கு, பார்வையிடவும் அமேசானில் டோனர் ஸ்டோர் or consult the included owner's manual for contact information.