சில்கா பிஸ்டா தரை பம்ப் பயனர் கையேடு

அறிமுகம்

Thank you for choosing the SILCA Pista Floor Pump. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new pump. Designed for quick and efficient inflation of bicycle tires, the SILCA Pista combines high-pressure capability with durable construction and premium components.

தயாரிப்பு முடிந்துவிட்டதுview

Figure 1: The SILCA Pista Floor Pump in red with a black single-sided base and wood handle.

முக்கிய அம்சங்கள்:

• High Pressure Design: Delivers high pressure for quick and efficient inflation of bicycle tires.
• எஃகு கட்டுமானம்: Durable steel construction ensures long-lasting quality and performance.
• Wood Handle: Ergonomic Ash wood handle provides a comfortable grip.
• Premium Presta and Schrader Chuck: Equipped with machined aluminum chucks for various valve types.
• Leather Gasket: Includes a leather gasket for a secure and airtight pumping.

அமைவு

The SILCA Pista Floor Pump comes largely pre-assembled. Follow these steps to prepare your pump for first use:

1. அன்பாக்சிங்: Carefully remove the pump from its packaging. Inspect for any visible damage.
2. Hose and Chuck Inspection: Ensure the hose is securely attached to the pump body and the chucks (Presta and Schrader) are properly connected to the hose.
3. அடிப்படை நிலைத்தன்மை: Place the pump on a flat, stable surface. The single-sided base provides stability during operation.

இயக்க வழிமுறைகள்

Follow these steps for effective and safe tire inflation:

1. Prepare the Tire Valve:
   • For Presta valves, unscrew the valve core lock nut counter-clockwise until it is loose. Press down briefly on the valve core to release a small amount of air and ensure it is not stuck.
   • For Schrader valves, no special preparation is typically needed.
2. Attach the Chuck:
   • Select the appropriate chuck (Presta or Schrader).
   • Firmly press the chuck onto the tire valve until it is fully seated. Ensure a tight seal to prevent air leakage.
   

   Figure 2: The SILCA Pista Floor Pump chuck attached to a bicycle tire valve.
3. டயரை உயர்த்தவும்:
   • Hold the pump handle firmly and place your feet on the pump's base for stability.
   • Push the handle down smoothly and completely to inflate the tire. Pull the handle back up to draw in more air.
   • Repeat this motion until the desired pressure is reached.
   

   Figure 3: Proper technique for using the SILCA Pista Floor Pump.

4. மானிட்டர் அழுத்தம்:
   • Observe the pressure gauge located at the base of the pump. Inflate to the recommended PSI (Pounds per Square Inch) or BAR for your tire.
   • Note: The gauge scale is condensed at higher pressures. Read carefully.
   

   படம் 4: நெருக்கமான காட்சி view of the pressure gauge on the pump's base.

5. Remove the Chuck: Once the desired pressure is achieved, quickly and firmly pull the chuck straight off the valve.
6. Secure Presta Valve (if applicable): For Presta valves, screw the valve core lock nut clockwise until it is finger-tight.

பராமரிப்பு

Regular maintenance ensures the longevity and optimal performance of your SILCA Pista Floor Pump.

• Leather Gasket Care: The leather gasket is crucial for an airtight seal. Over time, it may dry out or wear.
  • If pumping becomes difficult or air leaks are detected, the leather gasket may need lubrication or replacement.
  • Apply a small amount of leather conditioner or a suitable lubricant to the gasket to keep it supple.
  • Replacement leather gaskets are available from SILCA or authorized dealers.
• பொது சுத்தம்: Wipe down the pump body and hose with a damp அழுக்கு மற்றும் தூசி நீக்க துணி. கடுமையான இரசாயனங்கள் பயன்படுத்துவதை தவிர்க்கவும்.
• சேமிப்பு: Store the pump in a dry, clean environment away from extreme temperatures.

சரிசெய்தல்

விவரக்குறிப்புகள்

• மாதிரி பெயர்: PISTA
• பகுதி எண்: AM-PU-001-ASY-0101
• நிறம்: சிவப்பு
• பொருட்கள்: Alloy Steel, Aluminum, Brass, Leather, Wood
• சக்தி ஆதாரம்: கையேடு
• அதிகபட்ச அழுத்தம்: 15 Bars (approximately 220 PSI)
• பொருளின் பரிமாணங்கள் (LxWxH): 25.98 x 9.06 x 3.94 அங்குலம்
• பொருள் தொகுப்பு பரிமாணங்கள் (LxWxH): 27 x 9.5 x 3 அங்குலம்
• தொகுப்பு எடை: 0.66 கிலோகிராம்
• UPC: 853740005886

உத்தரவாதம் மற்றும் ஆதரவு

SILCA products are built for durability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official SILCA website. For technical support, replacement parts, or service inquiries, please contact SILCA customer service directly.

SILCA Official Webதளம்: www.silca.cc

தொடர்பு தகவல்: தயவுசெய்து பார்க்கவும் webமிகவும் புதுப்பித்த தொடர்பு விவரங்களுக்கான தளம்.