Viessmann Oil Hose Set (800521) for Oil Burners

அறிமுகம்

This instruction manual provides essential information for the safe and effective use of the Viessmann Oil Hose Set (800521). This 2-piece OEM oil hose kit is designed for use with oil burners in heating systems. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

தயாரிப்பு முடிந்துவிட்டதுview மற்றும் கூறுகள்

The Viessmann Oil Hose Set (800521) consists of two high-quality oil hoses designed for connecting components within an oil burner system. These hoses are critical for the reliable supply of fuel.

• அளவு: 2 oil hoses
• இணைப்பான்: 3/8" connector nut
• நீளம்: 1000 mm (1 meter)
• உள் விட்டம்: 6 மி.மீ
• கட்டுமானம்: High-quality, durable materials suitable for oil transport.

Image 1: The Viessmann Oil Hose Set, showing two coiled hoses with their metal fittings. These hoses are designed for fuel transport in oil burner systems.

படம் 2: ஒரு விரிவான view of the robust metal fittings on the ends of the Viessmann oil hoses, highlighting their secure connection points.

Image 3: A closer look at the connection points of the Viessmann oil hoses, illustrating the quality of the crimped fittings and the hose material.

விவரக்குறிப்புகள்

பாதுகாப்பு தகவல்

எச்சரிக்கை: Improper installation or handling of oil hoses can lead to fuel leaks, fire hazards, and serious injury. Always follow these safety guidelines:

• Ensure the heating system is completely shut down and cooled before beginning any work.
• Disconnect power to the oil burner before installation.
• கையுறைகள் மற்றும் கண் பாதுகாப்பு உள்ளிட்ட பொருத்தமான தனிப்பட்ட பாதுகாப்பு உபகரணங்களை (PPE) அணியுங்கள்.
• Handle fuel with extreme care. Avoid spills and ensure adequate ventilation.
• Do not smoke or use open flames near fuel lines.
• Ensure all connections are tight and leak-free after installation.
• ஏதேனும் ஒரு படி குறித்து உங்களுக்கு சந்தேகம் இருந்தால், தகுதிவாய்ந்த தொழில்நுட்ப வல்லுநரை அணுகவும்.

நிறுவல் (அமைவு)

This section provides general guidance for replacing oil hoses. Specific installation steps may vary depending on your oil burner model. Refer to your oil burner's specific service manual for detailed instructions.

1. தயாரிப்பு: Ensure the oil burner is off, cooled, and power is disconnected. Place absorbent material under the work area to catch any fuel drips.
2. Disconnect Old Hoses: Carefully loosen the connector nuts on the old oil hoses using an appropriate wrench. Be prepared for residual fuel to drain.
3. Remove Old Hoses: Once disconnected, remove the old hoses from the system.
4. இணைப்புகளைச் சரிபார்க்கவும்: Check the connection points on the oil burner and fuel tank/pump for cleanliness and damage. Clean as necessary.
5. Install New Hoses: Connect the new Viessmann oil hoses. Ensure the 3/8" connector nuts are properly aligned and hand-tighten them first.
6. இணைப்புகளை இறுக்குங்கள்: Using a wrench, carefully tighten the connector nuts. Do not overtighten, as this can damage the fittings. Ensure a snug, leak-free seal.
7. கணினி மறுதொடக்கம்: After installation, reconnect power to the oil burner. Follow the manufacturer's instructions for priming the fuel system and restarting the burner.
8. கசிவு சோதனை: Carefully inspect all new connections for any signs of fuel leakage immediately after restarting and during initial operation.

ஆபரேஷன்

The Viessmann Oil Hoses are passive components designed to transport fuel within your oil burner system. Once correctly installed, they operate continuously as part of the fuel delivery system. Their proper function is integral to the overall operation of the oil burner.

பராமரிப்பு

Regular inspection of your oil hoses is crucial for preventing fuel leaks and ensuring the safe operation of your oil burner.

• காட்சி ஆய்வு: Periodically check the hoses for any signs of wear, cracks, abrasions, bulges, or hardening. Also, look for any discoloration or residue around the fittings, which could indicate a slow leak.
• கசிவு கண்டறிதல்: If a fuel odor is detected, immediately shut down the oil burner and investigate for leaks. Do not restart the burner until the leak is identified and repaired.
• மாற்று அட்டவணை: Oil hoses have a limited lifespan. Consult your oil burner's service manual for recommended replacement intervals. Even without visible damage, hoses should be replaced preventatively after a certain number of years (typically 5-10 years, depending on manufacturer recommendations and operating conditions).
• சுத்தம்: Keep the area around the hoses clean and free of debris or corrosive substances that could degrade the hose material.

சரிசெய்தல்

If you experience issues with your oil burner that you suspect are related to the fuel lines, consider the following:

• Fuel Odor: A strong fuel odor indicates a leak. Immediately shut down the system and inspect all connections and the hose body for damage. Tighten connections or replace the hose as necessary.
• Burner Not Firing: If the burner is not receiving fuel, check for kinks or blockages in the hoses. Ensure the fuel supply valve is open. If the hoses appear intact, the issue may lie elsewhere in the fuel system or burner.
• காணக்கூடிய சேதம்: Any visible damage to the hose (cracks, bulges, fraying) requires immediate replacement of the affected hose.

For complex issues or if you are unable to resolve a problem, contact a qualified heating system technician.

உத்தரவாதம் மற்றும் ஆதரவு

For information regarding the warranty of your Viessmann Oil Hose Set (800521), please refer to the purchase documentation or contact your supplier. For technical support or further assistance, please reach out to Viessmann customer service or a certified Viessmann service partner.

உற்பத்தியாளர்: விஸ்மேன்

பகுதி எண்: 2700206