Rolair JC20 Portable Air Compressor User Manual

1. அறிமுகம்

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Rolair JC20 Hand Carry Portable Air Compressor. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

The Rolair JC20 is an oilless, 2 horsepower electric air compressor designed for light-duty framing and roofing work. It features a two-cylinder pump, a low-amp draw motor, a heavy-duty roll-cage, integrated cord wrap, upward-facing gauges, and a quarter-turn drain valve, all contributing to its quiet operation at only 70 dB.

2. பாதுகாப்பு தகவல்

Always observe the following safety precautions to reduce the risk of electric shock, fire, or serious injury.

• அனைத்து வழிமுறைகளையும் படிக்கவும்: Familiarize yourself with the compressor's controls and proper operation.
• மின் பாதுகாப்பு: மின் மூலமானது கம்ப்ரசரின் ஒலியளவுடன் பொருந்துகிறதா என்பதை உறுதிப்படுத்திக் கொள்ளுங்கள்.tage (115 Volts AC). Do not operate in wet conditions. Always use a grounded outlet.
• தனிப்பட்ட பாதுகாப்பு உபகரணங்கள்: Wear safety glasses or goggles when operating the compressor or using air tools. Hearing protection is recommended, especially during prolonged use.
• செயல்படும் சூழல்: Operate the compressor in a well-ventilated area. Keep children and bystanders away. Do not operate near flammable liquids or gases.
• அழுத்த பாதுகாப்பு: Never exceed the maximum operating pressure of any air tool or accessory. Do not attempt to modify the pressure relief valve.
• பராமரிப்பு: எந்தவொரு பராமரிப்பு அல்லது பழுதுபார்க்கும் முன் மின்சாரத்தைத் துண்டிக்கவும்.
• சூடான மேற்பரப்புகள்: The compressor pump and motor can become hot during operation. Avoid contact with hot surfaces.

3. முக்கிய அம்சங்கள் மற்றும் கூறுகள்

The Rolair JC20 is engineered with several features for performance and durability:

• மிக அமைதியான செயல்பாடு: ஒற்றை-கள்tage oilless design with only 70 dB noise level.
• Durable Pump: Cast aluminum cylinder with stainless steel reed valves.
• திறமையான மோட்டார்: 1700 RPM low-amp draw motor with automatic overload protection.
• Protective Roll-Cage: Heavy-duty design to protect the pump and motor.
• Integrated Cord Wrap: வசதியான சேமிப்பு மற்றும் போக்குவரத்துக்கு.
• Upward-Facing Gauges: For easy monitoring of tank and regulated pressure.
• Quarter-Turn Drain Valve: For easy moisture drainage from the tank.

படம் 3.1: முன் view of the Rolair JC20 Air Compressor, showing the green tank, motor, gauges, and protective roll-cage.

படம் 3.2: கோணல் view highlighting the two-cylinder pump heads and motor assembly.

படம் 3.3: பக்கம் view of the Rolair JC20, illustrating the compact design and component layout within the roll-cage.

4 அமைவு

1. பேக்கிங்: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage to your dealer immediately.
2. இடம்: Place the compressor on a firm, level surface in a clean, dry, and well-ventilated area. Ensure adequate clearance around the unit for air circulation.
3. மின் இணைப்பு:
   • மின்சாரம் வழங்கல் தொகுதி என்பதை சரிபார்க்கவும்tage matches the compressor's requirements (115 Volts AC).
   • Plug the power cord into a grounded electrical outlet. Avoid using extension cords if possible. If an extension cord is necessary, use a heavy-duty, grounded cord of appropriate gauge for the distance.
4. Initial Drain: Before first use, ensure the quarter-turn drain valve at the bottom of the tank is closed.

5. இயக்க வழிமுறைகள்

1. பவர் ஆன்: Locate the ON/OFF switch (typically a rocker switch or pressure switch) and turn the compressor ON. The compressor will begin to build pressure.
2. அழுத்தம் அதிகரிப்பு: Allow the compressor to run until it reaches its maximum pressure and the motor automatically shuts off. This indicates the tank is fully charged.
3. இணைக்கும் காற்று கருவிகள்:
   • Attach your air hose to the quick-connect coupler on the compressor.
   • Connect your air tool to the other end of the hose.
4. Adjusting Output Pressure: Use the pressure regulator knob to set the desired output pressure for your air tool. Monitor the regulated pressure gauge.
5. ஆபரேஷன்: Begin using your air tool. The compressor will cycle on and off automatically to maintain tank pressure as air is consumed.
6. பவர் ஆஃப்: When finished, turn the compressor OFF using the ON/OFF switch.
7. மன அழுத்தத்தைக் குறை: Disconnect the air hose and tool. Allow any remaining air in the tank to escape through the drain valve or by briefly opening the regulator.

6. பராமரிப்பு

Regular maintenance ensures the longevity and optimal performance of your Rolair JC20 compressor. Always disconnect the power before performing maintenance.

• Daily: Drain Moisture from Tank:
  • With the compressor off and tank depressurized, open the quarter-turn drain valve located at the bottom of the tank.
  • Allow all accumulated moisture to drain completely.
  • Close the drain valve securely.
• Weekly/Monthly: Inspect Air Filter:
  • Check the air intake filter for dirt and debris.
  • Clean or replace the filter as necessary. A clogged filter can reduce compressor performance and lifespan.
• Periodically: Inspect for Leaks:
  • With the compressor pressurized, apply a soapy water solution to all fittings and connections.
  • Bubbles indicate a leak. Tighten connections or replace seals as needed.
• சேமிப்பு: Store the compressor in a clean, dry location. Ensure the tank is drained of moisture before storage.

7. சரிசெய்தல்

8. விவரக்குறிப்புகள்

9. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, please refer to the documentation included with your purchase or visit the official Rolair website. For technical support, parts, or service inquiries, please contact Rolair customer service or your authorized dealer.

உற்பத்தியாளர்: ROLAIR

தொடர்பு தகவல்: Please refer to the contact details provided on the Rolair official website or your purchase receipt for the most current support options.