Invacare 026935 Hand Control Pendant User Manual

1. அறிமுகம்

This manual provides instructions for the Invacare 026935 Hand Control Pendant. This device is designed as a replacement hand control for specific Invacare full electric beds, models SC900 and IH720. It features a 6-button interface for bed function control and connects via a 6-wire telephone plug connector.

1.1 நோக்கம் கொண்ட பயன்பாடு

The Invacare 026935 Hand Control Pendant is intended for use by individuals requiring control over the functions of compatible Invacare full electric beds. It allows for adjustment of bed positions such as head, foot, and overall bed height.

2. தொகுப்பு உள்ளடக்கங்கள்

உங்கள் தொகுப்பில் பின்வரும் உருப்படி உள்ளதா என சரிபார்க்கவும்:

• 1 x Invacare 026935 Hand Control Pendant

3. அமைவு மற்றும் நிறுவல்

The Invacare 026935 Hand Control Pendant connects to compatible Invacare SC900 and IH720 beds using its integrated 6-wire telephone plug connector.

1. Locate the Connection Port: Identify the corresponding telephone-style jack on your Invacare SC900 or IH720 bed frame. This port is typically located near the foot end or side rail of the bed.
2. Connect the Pendant: Align the 6-wire telephone plug connector of the hand control pendant with the bed's connection port. Gently push the plug into the port until it clicks securely into place. Ensure the connection is firm to prevent accidental disconnection during use.
3. சோதனை செயல்பாடு: After connecting, test all six buttons on the pendant to ensure proper operation of the bed's functions (e.g., head up/down, foot up/down, bed height up/down). If the bed does not respond, check the connection for security and ensure the bed is powered on.

4. இயக்க வழிமுறைகள்

The Invacare 026935 Hand Control Pendant features six buttons for controlling the functions of your Invacare full electric bed. The specific functions controlled by each button may vary slightly based on the bed model (SC900 or IH720), but generally include:

• தலை மேல்/கீழ்: Buttons to raise or lower the head section of the bed.
• கால் மேல்/கீழ்: Buttons to raise or lower the foot section of the bed.
• Bed Height Up/Down: Buttons to adjust the overall height of the bed frame.

To operate, press and hold the desired button. Release the button when the bed reaches the desired position. Avoid pressing multiple buttons simultaneously unless specifically instructed by your bed's primary manual.

5. பராமரிப்பு

Regular maintenance ensures the longevity and proper function of your hand control pendant.

• சுத்தம்: Wipe the surface of the pendant with a soft, damp cloth. Use mild soap if necessary. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the electronic components.
• ஆய்வு: Periodically inspect the cord and connector for any signs of wear, fraying, or damage. If any damage is observed, discontinue use and contact Invacare customer support for replacement.
• சேமிப்பு: When not in use, store the pendant in a clean, dry place, away from direct sunlight and extreme temperatures.

6. சரிசெய்தல்

If the hand control pendant is not functioning as expected, refer to the following common issues and solutions:

• Pendant Not Responding:
  • Ensure the 6-wire telephone plug connector is securely inserted into the bed's port.
  • Verify that the bed is properly plugged into a power outlet and receiving power.
  • Check the bed's main power switch, if applicable, to ensure it is in the 'ON' position.
  • If the issue persists, the pendant or the bed's control unit may require service.
• இடைப்பட்ட செயல்பாடு:
  • Check the cord for any kinks, twists, or damage that might be causing intermittent contact.
  • இணைப்பான் சுத்தமாகவும் குப்பைகள் இல்லாமல் இருப்பதையும் உறுதிசெய்யவும்.

For issues not resolved by these steps, contact Invacare customer support.

7. விவரக்குறிப்புகள்

8. ஆதரவு மற்றும் தொடர்புத் தகவல்

For technical assistance, replacement parts, or further inquiries regarding your Invacare 026935 Hand Control Pendant, please contact Invacare Customer Support.

Invacare Customer Support: 1-800-333-6900