1. தயாரிப்பு முடிந்துவிட்டதுview
The Notifier FST-951 is a fixed temperature thermal sensor designed for integration into fire alarm systems. This device detects heat exceeding a predetermined threshold, triggering an alarm condition. It utilizes FlashScan Technology for efficient communication within compatible Notifier systems. The sensor is housed in a white casing, suitable for various indoor environments.
படம் 1: முன் view of the Notifier FST-951 Fixed Temperature Thermal Sensor. This image shows the white, circular sensor head with a central, slightly recessed element.
2. நிறுவல் மற்றும் அமைவு
Installation of the Notifier FST-951 thermal sensor should only be performed by qualified personnel in accordance with all local and national electrical codes and standards, including NFPA 72. Proper placement is crucial for effective fire detection.
2.1 மவுண்டிங்
- Ensure the mounting location is clean, dry, and free from obstructions that could impede heat detection.
- Attach the compatible sensor base (not included) securely to the ceiling or wall using appropriate fasteners.
- Connect the system wiring to the terminals on the sensor base as per the wiring diagram provided with the base and control panel documentation.
- Align the FST-951 sensor head with the mounting base and rotate clockwise until it clicks into place, ensuring a secure electrical connection.
படம் 2: பின்புறம் view of the Notifier FST-951 sensor head. This image displays the electrical contacts and mounting alignment features on the back of the sensor, which connect to a separate base.
2.2 ஆரம்ப பவர்-அப்
Once installed, apply power to the fire alarm control panel. The sensor will perform a self-diagnostic check. Refer to the control panel manual for specific power-up sequences and indicator lights.
3. ஆபரேஷன்
The Notifier FST-951 is a fixed temperature thermal sensor, meaning it activates when the ambient temperature at the sensor location reaches a specific, predetermined threshold. It does not detect smoke or rapid temperature changes (rate-of-rise) unless specified by the model variant.
- இயல்பான செயல்பாடு: Under normal conditions, the sensor continuously monitors the ambient temperature. There are typically no visible indicators (like flashing LEDs) during normal operation for this specific model, as it is a thermal sensor head. Communication with the control panel occurs via FlashScan Technology.
- எச்சரிக்கை நிலை: If the temperature at the sensor reaches its fixed activation point (e.g., 135°F or 155°F, depending on the specific model variant), the sensor will enter an alarm state. This alarm condition is communicated to the fire alarm control panel, which will then initiate its programmed alarm sequence (e.g., activating audible/visual alarms, notifying monitoring stations).
- அலாரத்தை மீட்டமைத்தல்: After an alarm condition, the sensor will remain in alarm until the temperature drops below the alarm threshold and the fire alarm control panel is reset. Refer to your control panel's manual for proper alarm reset procedures.
4. பராமரிப்பு
Regular maintenance ensures the continued reliability and proper functioning of your thermal sensor. Always follow NFPA 72 guidelines for inspection, testing, and maintenance of fire alarm systems.
4.1 சுத்தம் செய்தல்
- அதிர்வெண்: Inspect the sensor head annually for dust, dirt, or obstructions. More frequent cleaning may be required in dusty environments.
- நடைமுறை:
- Notify relevant personnel that the fire alarm system will be temporarily taken out of service to prevent false alarms.
- Carefully remove the sensor head from its base by rotating counter-clockwise.
- ஒரு மென்மையான, டி பயன்படுத்தவும்amp cloth to wipe the exterior of the sensor. Do not use harsh chemicals or abrasive cleaners.
- உட்புற கூறுகளுக்குள் ஈரப்பதம் வராமல் பார்த்துக் கொள்ளுங்கள்.
- Reattach the sensor head to its base, ensuring it is securely seated.
- Restore the fire alarm system to normal operation and verify proper communication with the control panel.
Figure 3: Notifier FST-951 sensor shown with its protective orange cap and a small instruction manual. The cap is typically removed before operation but can be used during maintenance or storage.
4.2 சோதனை
Functional testing of thermal sensors should be conducted periodically by trained professionals. This typically involves applying a controlled heat source to the sensor to verify its activation at the specified temperature. Consult NFPA 72 and local codes for testing frequency and methods.
5. சரிசெய்தல்
This section provides general guidance for common issues. For complex problems, always contact a qualified fire alarm technician.
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Sensor not reporting to control panel | Loose connection, incorrect wiring, sensor fault, control panel issue. |
|
| Sensor in alarm without apparent heat source | Actual high temperature, sensor fault, environmental factors. |
|
6. விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| பிராண்ட் | அறிவிப்பான் |
| மாதிரி எண் | FST-951 |
| சென்சார் வகை | நிலையான வெப்பநிலை வெப்ப உணரி |
| நிறம் | வெள்ளை |
| பொருளின் எடை | 4.7 அவுன்ஸ் (தோராயமாக 133 கிராம்) |
| சக்தி ஆதாரம் | System Powered (via fire alarm control panel) |
| அலாரம் வகை | Audible (via connected fire alarm system) |
| தொழில்நுட்பம் | FlashScan Technology |
| UPC | 734038305089 |
| பகுதி எண் | NFST951 |
| தொகுப்பு பரிமாணங்கள் | 4.53 x 4.29 x 1.93 அங்குலம் |
7. உத்தரவாதம் மற்றும் ஆதரவு
For detailed warranty information, please refer to the official documentation provided by Notifier at the time of purchase or visit the Notifier website. For technical support, installation assistance, or service, please contact your authorized Notifier dealer or a qualified fire alarm system professional.
உற்பத்தியாளர்: அறிவிப்பாளர்
Webதளம்: www.notifier.com (எ.காampஇணைப்பு, உண்மையான இணைப்பு மாறுபடலாம்)
